I've updated http://mcs.anl.gov/~stace/SSFMove with more concrete plans. We're going to do the move in two phases. Phase 1 will be first weekend in October, phase 2 will be two weeks following that. Look over the details, I've made sure nobody is overcommitted, and I also have more labor that I've not committed to anything just as a failsafe. After I get back from vacation, we'll be adding in more of the pre- move tasks, such as the power work. == Craig
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Just to verify. All actually machine room moves will be done the 1st and 3rd weekend in october? Or am I reading these charts wrong? Rick Craig Stacey wrote:
I've updated http://mcs.anl.gov/~stace/SSFMove with more concrete plans.
We're going to do the move in two phases. Phase 1 will be first weekend in October, phase 2 will be two weeks following that.
Look over the details, I've made sure nobody is overcommitted, and I also have more labor that I've not committed to anything just as a failsafe.
After I get back from vacation, we'll be adding in more of the pre-move tasks, such as the power work. == Craig
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkpLtVUACgkQdavihOKkCCH70wCcDE3DGThB2jpdn3ebwQCyvBkZ E9cAoIifqBuK5Yw6Pu1t0uDAGTABsmKe =rn31 -----END PGP SIGNATURE-----
Yes. And I said as much in the 2nd paragraph below. :) On Jul 1, 2009, at 2:13 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Just to verify. All actually machine room moves will be done the 1st and 3rd weekend in october? Or am I reading these charts wrong?
Rick
Craig Stacey wrote:
I've updated http://mcs.anl.gov/~stace/SSFMove with more concrete plans.
We're going to do the move in two phases. Phase 1 will be first weekend in October, phase 2 will be two weeks following that.
Look over the details, I've made sure nobody is overcommitted, and I also have more labor that I've not committed to anything just as a failsafe.
After I get back from vacation, we'll be adding in more of the pre-move tasks, such as the power work. == Craig
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkpLtVUACgkQdavihOKkCCH70wCcDE3DGThB2jpdn3ebwQCyvBkZ E9cAoIifqBuK5Yw6Pu1t0uDAGTABsmKe =rn31 -----END PGP SIGNATURE-----
== Craig
Just so we are clear, I will be in Portland 10/25-30, Hopefully this doesn't impact anything. -- Corby Schmitz Network Engineer CIS/MCS/MREN/Starlight Argonne National Laboratory 9700 S. Cass Ave. Argonne, IL 60439 Desk: 630-252-7664 Cell: 630-795-9232 E-mail: [email protected] On Jul 1, 2009, at 2:30 PM, Craig Stacey wrote:
Yes. And I said as much in the 2nd paragraph below. :)
On Jul 1, 2009, at 2:13 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Just to verify. All actually machine room moves will be done the 1st and 3rd weekend in october? Or am I reading these charts wrong?
Rick
Craig Stacey wrote:
I've updated http://mcs.anl.gov/~stace/SSFMove with more concrete plans.
We're going to do the move in two phases. Phase 1 will be first weekend in October, phase 2 will be two weeks following that.
Look over the details, I've made sure nobody is overcommitted, and I also have more labor that I've not committed to anything just as a failsafe.
After I get back from vacation, we'll be adding in more of the pre-move tasks, such as the power work. == Craig
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkpLtVUACgkQdavihOKkCCH70wCcDE3DGThB2jpdn3ebwQCyvBkZ E9cAoIifqBuK5Yw6Pu1t0uDAGTABsmKe =rn31 -----END PGP SIGNATURE-----
== Craig
We should have the move done by then. That's one of the reasons I moved everything up instead of having 10/31 be the ending date. == Craig On Jul 1, 2009, at 3:08 PM, Schmitz Corby wrote:
Just so we are clear, I will be in Portland 10/25-30, Hopefully this doesn't impact anything.
-- Corby Schmitz Network Engineer CIS/MCS/MREN/Starlight Argonne National Laboratory 9700 S. Cass Ave. Argonne, IL 60439 Desk: 630-252-7664 Cell: 630-795-9232 E-mail: [email protected]
On Jul 1, 2009, at 2:30 PM, Craig Stacey wrote:
Yes. And I said as much in the 2nd paragraph below. :)
On Jul 1, 2009, at 2:13 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Just to verify. All actually machine room moves will be done the 1st and 3rd weekend in october? Or am I reading these charts wrong?
Rick
Craig Stacey wrote:
I've updated http://mcs.anl.gov/~stace/SSFMove with more concrete plans.
We're going to do the move in two phases. Phase 1 will be first weekend in October, phase 2 will be two weeks following that.
Look over the details, I've made sure nobody is overcommitted, and I also have more labor that I've not committed to anything just as a failsafe.
After I get back from vacation, we'll be adding in more of the pre-move tasks, such as the power work. == Craig
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkpLtVUACgkQdavihOKkCCH70wCcDE3DGThB2jpdn3ebwQCyvBkZ E9cAoIifqBuK5Yw6Pu1t0uDAGTABsmKe =rn31 -----END PGP SIGNATURE-----
== Craig
Glad to help ;) -- Corby Schmitz Mobile On Jul 1, 2009, at 15:11, Craig Stacey <[email protected]> wrote:
We should have the move done by then. That's one of the reasons I moved everything up instead of having 10/31 be the ending date. == Craig
On Jul 1, 2009, at 3:08 PM, Schmitz Corby wrote:
Just so we are clear, I will be in Portland 10/25-30, Hopefully this doesn't impact anything.
-- Corby Schmitz Network Engineer CIS/MCS/MREN/Starlight Argonne National Laboratory 9700 S. Cass Ave. Argonne, IL 60439 Desk: 630-252-7664 Cell: 630-795-9232 E-mail: [email protected]
On Jul 1, 2009, at 2:30 PM, Craig Stacey wrote:
Yes. And I said as much in the 2nd paragraph below. :)
On Jul 1, 2009, at 2:13 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Just to verify. All actually machine room moves will be done the 1st and 3rd weekend in october? Or am I reading these charts wrong?
Rick
Craig Stacey wrote:
I've updated http://mcs.anl.gov/~stace/SSFMove with more concrete plans.
We're going to do the move in two phases. Phase 1 will be first weekend in October, phase 2 will be two weeks following that.
Look over the details, I've made sure nobody is overcommitted, and I also have more labor that I've not committed to anything just as a failsafe.
After I get back from vacation, we'll be adding in more of the pre-move tasks, such as the power work. == Craig
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkpLtVUACgkQdavihOKkCCH70wCcDE3DGThB2jpdn3ebwQCyvBkZ E9cAoIifqBuK5Yw6Pu1t0uDAGTABsmKe =rn31 -----END PGP SIGNATURE-----
== Craig
participants (4)
-
Craig Stacey -
Rick Bradshaw -
Schmitz Corby -
schmitz＠anl.gov