-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Here is a quick dump before I go.. I have racked both pieces of equipment in the bottom of BC-57 which is the last rack in the systems row. I haven't connected any cabling, but I can say that there is no C19 power available for the DDN currently in that rack. I have to admit that I don't have a solution for that, but maybe Corby would be able to figure something out. I left all the DDN info and the disks over behind the TRACC cluster, as I figured whoever was going to setup the DDN would install them. Corby, As for network connectivity, Bill mentioned that we should hit up Rob Jacob to kick in some cash for our 10Gb expansion on the HPC switch as he most likely wants 10Gb and will probably have some money to spend. If that doesn't pan out just run the 1Gb copper like we talked about previously. If you have any questions about this just send an email. I will most likely be checking it randomly. Rick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk1AkQMACgkQdavihOKkCCH75QCgi76myhxrNItNh8NP9Tth2rGk gIEAn1Nq82+8OUeBZYURmjlrpRpOGF8C =a2Qw -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 power problem is resolved. I see 2x 10GigE ports in the back of the server which are fiber based. I have some options here. How soon do these need to be online? - -corby On Jan 26, 2011, at 3:24 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Here is a quick dump before I go..
I have racked both pieces of equipment in the bottom of BC-57 which is the last rack in the systems row. I haven't connected any cabling, but I can say that there is no C19 power available for the DDN currently in that rack. I have to admit that I don't have a solution for that, but maybe Corby would be able to figure something out.
I left all the DDN info and the disks over behind the TRACC cluster, as I figured whoever was going to setup the DDN would install them.
Corby,
As for network connectivity, Bill mentioned that we should hit up Rob Jacob to kick in some cash for our 10Gb expansion on the HPC switch as he most likely wants 10Gb and will probably have some money to spend. If that doesn't pan out just run the 1Gb copper like we talked about previously.
If you have any questions about this just send an email. I will most likely be checking it randomly.
Rick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk1AkQMACgkQdavihOKkCCH75QCgi76myhxrNItNh8NP9Tth2rGk gIEAn1Nq82+8OUeBZYURmjlrpRpOGF8C =a2Qw -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin) iD8DBQFNQuX5QhpwH3ALVFERApEUAKCl95dsfCxQ6JBzGsKEcGtK9Bqg2wCgw8oe dZsPbuldMW73uq4CnbO2xY4= =QfNA -----END PGP SIGNATURE-----
Not time critical, but we don't want it to fall by the way side... How is that for a non-answer? :-) Seriously, my best guess is that days, or even a few weeks is probably fine, but if we start to approach a month, we should probably run it by Ian and Rob. Bill On Jan 28, 2011, at 9:51 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
power problem is resolved. I see 2x 10GigE ports in the back of the server which are fiber based. I have some options here. How soon do these need to be online?
- -corby
On Jan 26, 2011, at 3:24 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Here is a quick dump before I go..
I have racked both pieces of equipment in the bottom of BC-57 which is the last rack in the systems row. I haven't connected any cabling, but I can say that there is no C19 power available for the DDN currently in that rack. I have to admit that I don't have a solution for that, but maybe Corby would be able to figure something out.
I left all the DDN info and the disks over behind the TRACC cluster, as I figured whoever was going to setup the DDN would install them.
Corby,
As for network connectivity, Bill mentioned that we should hit up Rob Jacob to kick in some cash for our 10Gb expansion on the HPC switch as he most likely wants 10Gb and will probably have some money to spend. If that doesn't pan out just run the 1Gb copper like we talked about previously.
If you have any questions about this just send an email. I will most likely be checking it randomly.
Rick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk1AkQMACgkQdavihOKkCCH75QCgi76myhxrNItNh8NP9Tth2rGk gIEAn1Nq82+8OUeBZYURmjlrpRpOGF8C =a2Qw -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuX5QhpwH3ALVFERApEUAKCl95dsfCxQ6JBzGsKEcGtK9Bqg2wCgw8oe dZsPbuldMW73uq4CnbO2xY4= =QfNA -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842 The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 OK. I want do the networking right the first time, so lets give it two weeks max and then if we haven't resolved the process, we can give it a temporary network connection until the final setup is identified. sound good? - -corby On Jan 28, 2011, at 10:04 AM, William E. Allcock wrote:
Not time critical, but we don't want it to fall by the way side... How is that for a non-answer? :-)
Seriously, my best guess is that days, or even a few weeks is probably fine, but if we start to approach a month, we should probably run it by Ian and Rob.
Bill On Jan 28, 2011, at 9:51 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
power problem is resolved. I see 2x 10GigE ports in the back of the server which are fiber based. I have some options here. How soon do these need to be online?
- -corby
On Jan 26, 2011, at 3:24 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Here is a quick dump before I go..
I have racked both pieces of equipment in the bottom of BC-57 which is the last rack in the systems row. I haven't connected any cabling, but I can say that there is no C19 power available for the DDN currently in that rack. I have to admit that I don't have a solution for that, but maybe Corby would be able to figure something out.
I left all the DDN info and the disks over behind the TRACC cluster, as I figured whoever was going to setup the DDN would install them.
Corby,
As for network connectivity, Bill mentioned that we should hit up Rob Jacob to kick in some cash for our 10Gb expansion on the HPC switch as he most likely wants 10Gb and will probably have some money to spend. If that doesn't pan out just run the 1Gb copper like we talked about previously.
If you have any questions about this just send an email. I will most likely be checking it randomly.
Rick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk1AkQMACgkQdavihOKkCCH75QCgi76myhxrNItNh8NP9Tth2rGk gIEAn1Nq82+8OUeBZYURmjlrpRpOGF8C =a2Qw -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuX5QhpwH3ALVFERApEUAKCl95dsfCxQ6JBzGsKEcGtK9Bqg2wCgw8oe dZsPbuldMW73uq4CnbO2xY4= =QfNA -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842
The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin) iD8DBQFNQuqqQhpwH3ALVFERAu7TAKDElj3aJCjgekfn/2szuMgYLR8bvQCgxuax KlnuNfH/7OPIVzYbNLiigFo= =fNTD -----END PGP SIGNATURE-----
Yes, that sounds reasonable. Bill On Jan 28, 2011, at 10:11 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
OK. I want do the networking right the first time, so lets give it two weeks max and then if we haven't resolved the process, we can give it a temporary network connection until the final setup is identified.
sound good?
- -corby
On Jan 28, 2011, at 10:04 AM, William E. Allcock wrote:
Not time critical, but we don't want it to fall by the way side... How is that for a non-answer? :-)
Seriously, my best guess is that days, or even a few weeks is probably fine, but if we start to approach a month, we should probably run it by Ian and Rob.
Bill On Jan 28, 2011, at 9:51 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
power problem is resolved. I see 2x 10GigE ports in the back of the server which are fiber based. I have some options here. How soon do these need to be online?
- -corby
On Jan 26, 2011, at 3:24 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Here is a quick dump before I go..
I have racked both pieces of equipment in the bottom of BC-57 which is the last rack in the systems row. I haven't connected any cabling, but I can say that there is no C19 power available for the DDN currently in that rack. I have to admit that I don't have a solution for that, but maybe Corby would be able to figure something out.
I left all the DDN info and the disks over behind the TRACC cluster, as I figured whoever was going to setup the DDN would install them.
Corby,
As for network connectivity, Bill mentioned that we should hit up Rob Jacob to kick in some cash for our 10Gb expansion on the HPC switch as he most likely wants 10Gb and will probably have some money to spend. If that doesn't pan out just run the 1Gb copper like we talked about previously.
If you have any questions about this just send an email. I will most likely be checking it randomly.
Rick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk1AkQMACgkQdavihOKkCCH75QCgi76myhxrNItNh8NP9Tth2rGk gIEAn1Nq82+8OUeBZYURmjlrpRpOGF8C =a2Qw -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuX5QhpwH3ALVFERApEUAKCl95dsfCxQ6JBzGsKEcGtK9Bqg2wCgw8oe dZsPbuldMW73uq4CnbO2xY4= =QfNA -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842
The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuqqQhpwH3ALVFERAu7TAKDElj3aJCjgekfn/2szuMgYLR8bvQCgxuax KlnuNfH/7OPIVzYbNLiigFo= =fNTD -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842 The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
If you get it right the first time, what networking will it have? I am just going to send a quick update to Ian and Company. I am also going to set the deadline as Feb 14th which is two weeks from Monday. Sound fair? Bill On Jan 28, 2011, at 10:11 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
OK. I want do the networking right the first time, so lets give it two weeks max and then if we haven't resolved the process, we can give it a temporary network connection until the final setup is identified.
sound good?
- -corby
On Jan 28, 2011, at 10:04 AM, William E. Allcock wrote:
Not time critical, but we don't want it to fall by the way side... How is that for a non-answer? :-)
Seriously, my best guess is that days, or even a few weeks is probably fine, but if we start to approach a month, we should probably run it by Ian and Rob.
Bill On Jan 28, 2011, at 9:51 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
power problem is resolved. I see 2x 10GigE ports in the back of the server which are fiber based. I have some options here. How soon do these need to be online?
- -corby
On Jan 26, 2011, at 3:24 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Here is a quick dump before I go..
I have racked both pieces of equipment in the bottom of BC-57 which is the last rack in the systems row. I haven't connected any cabling, but I can say that there is no C19 power available for the DDN currently in that rack. I have to admit that I don't have a solution for that, but maybe Corby would be able to figure something out.
I left all the DDN info and the disks over behind the TRACC cluster, as I figured whoever was going to setup the DDN would install them.
Corby,
As for network connectivity, Bill mentioned that we should hit up Rob Jacob to kick in some cash for our 10Gb expansion on the HPC switch as he most likely wants 10Gb and will probably have some money to spend. If that doesn't pan out just run the 1Gb copper like we talked about previously.
If you have any questions about this just send an email. I will most likely be checking it randomly.
Rick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk1AkQMACgkQdavihOKkCCH75QCgi76myhxrNItNh8NP9Tth2rGk gIEAn1Nq82+8OUeBZYURmjlrpRpOGF8C =a2Qw -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuX5QhpwH3ALVFERApEUAKCl95dsfCxQ6JBzGsKEcGtK9Bqg2wCgw8oe dZsPbuldMW73uq4CnbO2xY4= =QfNA -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842
The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuqqQhpwH3ALVFERAu7TAKDElj3aJCjgekfn/2szuMgYLR8bvQCgxuax KlnuNfH/7OPIVzYbNLiigFo= =fNTD -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842 The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Rick made it sound like 10GigE was the desired setup. If that is not the case, then we can definitely hit 2/14. - -corby On Jan 28, 2011, at 10:26 AM, William E. Allcock wrote:
If you get it right the first time, what networking will it have? I am just going to send a quick update to Ian and Company. I am also going to set the deadline as Feb 14th which is two weeks from Monday. Sound fair?
Bill On Jan 28, 2011, at 10:11 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
OK. I want do the networking right the first time, so lets give it two weeks max and then if we haven't resolved the process, we can give it a temporary network connection until the final setup is identified.
sound good?
- -corby
On Jan 28, 2011, at 10:04 AM, William E. Allcock wrote:
Not time critical, but we don't want it to fall by the way side... How is that for a non-answer? :-)
Seriously, my best guess is that days, or even a few weeks is probably fine, but if we start to approach a month, we should probably run it by Ian and Rob.
Bill On Jan 28, 2011, at 9:51 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
power problem is resolved. I see 2x 10GigE ports in the back of the server which are fiber based. I have some options here. How soon do these need to be online?
- -corby
On Jan 26, 2011, at 3:24 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Here is a quick dump before I go..
I have racked both pieces of equipment in the bottom of BC-57 which is the last rack in the systems row. I haven't connected any cabling, but I can say that there is no C19 power available for the DDN currently in that rack. I have to admit that I don't have a solution for that, but maybe Corby would be able to figure something out.
I left all the DDN info and the disks over behind the TRACC cluster, as I figured whoever was going to setup the DDN would install them.
Corby,
As for network connectivity, Bill mentioned that we should hit up Rob Jacob to kick in some cash for our 10Gb expansion on the HPC switch as he most likely wants 10Gb and will probably have some money to spend. If that doesn't pan out just run the 1Gb copper like we talked about previously.
If you have any questions about this just send an email. I will most likely be checking it randomly.
Rick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk1AkQMACgkQdavihOKkCCH75QCgi76myhxrNItNh8NP9Tth2rGk gIEAn1Nq82+8OUeBZYURmjlrpRpOGF8C =a2Qw -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuX5QhpwH3ALVFERApEUAKCl95dsfCxQ6JBzGsKEcGtK9Bqg2wCgw8oe dZsPbuldMW73uq4CnbO2xY4= =QfNA -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842
The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuqqQhpwH3ALVFERAu7TAKDElj3aJCjgekfn/2szuMgYLR8bvQCgxuax KlnuNfH/7OPIVzYbNLiigFo= =fNTD -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842
The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin) iD8DBQFNQu7bQhpwH3ALVFERAkmPAKDO3CzW+g9XXp+6chnOqvSHicNLJwCdGk7l yo6GFEUPEItMOK4pY16Lh6s= =M6Zf -----END PGP SIGNATURE-----
Yes, that was the desired set up, I just wanted to make sure that is what you were planning. When you said it had 2x 10GigE on the host I wasn't sure if you were planning for 1 or 2 (one is all that was requested). Thanks, Bill On Jan 28, 2011, at 10:29 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Rick made it sound like 10GigE was the desired setup. If that is not the case, then we can definitely hit 2/14.
- -corby
On Jan 28, 2011, at 10:26 AM, William E. Allcock wrote:
If you get it right the first time, what networking will it have? I am just going to send a quick update to Ian and Company. I am also going to set the deadline as Feb 14th which is two weeks from Monday. Sound fair?
Bill On Jan 28, 2011, at 10:11 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
OK. I want do the networking right the first time, so lets give it two weeks max and then if we haven't resolved the process, we can give it a temporary network connection until the final setup is identified.
sound good?
- -corby
On Jan 28, 2011, at 10:04 AM, William E. Allcock wrote:
Not time critical, but we don't want it to fall by the way side... How is that for a non-answer? :-)
Seriously, my best guess is that days, or even a few weeks is probably fine, but if we start to approach a month, we should probably run it by Ian and Rob.
Bill On Jan 28, 2011, at 9:51 AM, Schmitz Corby wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
power problem is resolved. I see 2x 10GigE ports in the back of the server which are fiber based. I have some options here. How soon do these need to be online?
- -corby
On Jan 26, 2011, at 3:24 PM, Rick Bradshaw wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Here is a quick dump before I go..
I have racked both pieces of equipment in the bottom of BC-57 which is the last rack in the systems row. I haven't connected any cabling, but I can say that there is no C19 power available for the DDN currently in that rack. I have to admit that I don't have a solution for that, but maybe Corby would be able to figure something out.
I left all the DDN info and the disks over behind the TRACC cluster, as I figured whoever was going to setup the DDN would install them.
Corby,
As for network connectivity, Bill mentioned that we should hit up Rob Jacob to kick in some cash for our 10Gb expansion on the HPC switch as he most likely wants 10Gb and will probably have some money to spend. If that doesn't pan out just run the 1Gb copper like we talked about previously.
If you have any questions about this just send an email. I will most likely be checking it randomly.
Rick -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk1AkQMACgkQdavihOKkCCH75QCgi76myhxrNItNh8NP9Tth2rGk gIEAn1Nq82+8OUeBZYURmjlrpRpOGF8C =a2Qw -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuX5QhpwH3ALVFERApEUAKCl95dsfCxQ6JBzGsKEcGtK9Bqg2wCgw8oe dZsPbuldMW73uq4CnbO2xY4= =QfNA -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842
The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQuqqQhpwH3ALVFERAu7TAKDElj3aJCjgekfn/2szuMgYLR8bvQCgxuax KlnuNfH/7OPIVzYbNLiigFo= =fNTD -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842
The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
-----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.11 (Darwin)
iD8DBQFNQu7bQhpwH3ALVFERAkmPAKDO3CzW+g9XXp+6chnOqvSHicNLJwCdGk7l yo6GFEUPEItMOK4pY16Lh6s= =M6Zf -----END PGP SIGNATURE-----
-------------------------------------------------------------- William (Bill) E. Allcock [email protected] Office 1123, Bldg 240 9700 S. Cass Ave Argonne, IL 60439 Office: 630-252-7573 Fax: 630-252-6585 Cell: 630-854-2842 The test of courage comes when we are in the minority. The test of tolerance comes when we are in the majority. - Ralph W. Sockman
participants (3)
-
Rick Bradshaw -
Schmitz Corby -
William E. Allcock