November 2012 - devel - mailman3.cels.anl.gov

Re: [mpich-devel] LLONG_MAX undeclared in status_set_elements_x.c ?
by Dave Goodell 29 Nov '12

29 Nov '12

Howard, what configure options are you using? We've seen a problem like this when "--enable-strict=c89" is passed, since the features.h header deliberately avoids defining LLONG_MAX when in C89 mode. I haven't had the time to come up with a fix for this yet. -Dave On Nov 29, 2012, at 3:08 PM CST, Howard Pritchard wrote: > HI Folks, > > I've done a fresh update of mpich2 trunk on my sles 11 machine, done a new autogen.sh > and config of mpich. But when I compile, I get this error in this fairly recently introduced > file: > > src/mpi/datatype/status_set_elements_x.c: In function 'MPIR_Status_set_elements_x_impl': > src/mpi/datatype/status_set_elements_x.c:41: error: 'LLONG_MAX' undeclared (first use in this function) > src/mpi/datatype/status_set_elements_x.c:41: error: (Each undeclared identifier is reported only once > src/mpi/datatype/status_set_elements_x.c:41: error: for each function it appears in.) > make[2]: *** [src/mpi/datatype/status_set_elements_x.lo] Error 1 > > It looks like mpiimpl.h isn't pulling in limits.h. > > Howard > > -- > Howard Pritchard > Software Engineering > Cray, Inc. >

1 0

LLONG_MAX undeclared in status_set_elements_x.c ?
by Howard Pritchard 29 Nov '12

29 Nov '12

HI Folks, I've done a fresh update of mpich2 trunk on my sles 11 machine, done a new autogen.sh and config of mpich. But when I compile, I get this error in this fairly recently introduced file: src/mpi/datatype/status_set_elements_x.c: In function 'MPIR_Status_set_elements_x_impl': src/mpi/datatype/status_set_elements_x.c:41: error: 'LLONG_MAX' undeclared (first use in this function) src/mpi/datatype/status_set_elements_x.c:41: error: (Each undeclared identifier is reported only once src/mpi/datatype/status_set_elements_x.c:41: error: for each function it appears in.) make[2]: *** [src/mpi/datatype/status_set_elements_x.lo] Error 1 It looks like mpiimpl.h isn't pulling in limits.h. Howard -- Howard Pritchard Software Engineering Cray, Inc.

1 0

Re: [mpich-devel] \\Re: 404 — File not found. mpich2-1.5.tar.gz
by Pavan Balaji 23 Nov '12

23 Nov '12

On 11/23/2012 08:00 AM US Central Time, Donald Moore wrote: > I find found some more issues with downloads BOF slides . (low > priority) This was fixed a few hours ago. I'm able to download the files fine. -- Pavan Balaji http://www.mcs.anl.gov/~balaji

1 0

\\Re: 404 — File not found. mpich2-1.5.tar.gz
by Donald Moore 23 Nov '12

23 Nov '12

Dave-- I find found some more issues with downloads BOF slides . (low priority) http://www.mpich.org/2012/11/16/mpich-bof-slides-from-sc12-available/ wget http://www.mpich.org/static/docs/slides/2012-sc-bof/MPICH_BOF_SC12-Intro.pdf --2012-11-23 07:58:17-- http://www.mpich.org/static/docs/slides/2012-sc-bof/MPICH_BOF_SC12-Intro.pdf Resolving www.mpich.org (www.mpich.org) 140.221.6.71 Connecting to www.mpich.org (www.mpich.org)|140.221.6.71|:80... connected. HTTP request sent, awaiting response... 403 Forbidden 2012-11-23 07:58:17 ERROR 403: Forbidden. wget http://www.mpich.org/static/docs/slides/2012-sc-bof/MPICH_BOF_SC12-20_Years… --2012-11-23 07:58:41-- http://www.mpich.org/static/docs/slides/2012-sc-bof/MPICH_BOF_SC12-20_Years… Resolving www.mpich.org (www.mpich.org) 140.221.6.71 Connecting to www.mpich.org (www.mpich.org)|140.221.6.71|:80... connected. HTTP request sent, awaiting response... 403 Forbidden 2012-11-23 07:58:41 ERROR 403: Forbidden. wget http://www.mpich.org/static/docs/slides/2012-sc-bof/MPICH_BOF_SC12-30_and_B… --2012-11-23 07:59:00-- http://www.mpich.org/static/docs/slides/2012-sc-bof/MPICH_BOF_SC12-30_and_B… Resolving www.mpich.org (www.mpich.org) 140.221.6.71 Connecting to www.mpich.org (www.mpich.org)|140.221.6.71|:80... connected. HTTP request sent, awaiting response... 403 Forbidden 2012-11-23 07:59:00 ERROR 403: Forbidden. wget http://www.mpich.org/static/docs/slides/2012-sc-bof/MPICH_BOF_SC12-IBM.pdf --2012-11-23 07:59:16-- http://www.mpich.org/static/docs/slides/2012-sc-bof/MPICH_BOF_SC12-IBM.pdf Resolving www.mpich.org (www.mpich.org) 140.221.6.71 Connecting to www.mpich.org (www.mpich.org)|140.221.6.71|:80... connected. HTTP request sent, awaiting response... 403 Forbidden 2012-11-23 07:59:17 ERROR 403: Forbidden. ----- Original Message ----- From: "Dave Goodell" <goodell(a)mcs.anl.gov> To: devel(a)mpich.org Sent: Monday, November 19, 2012 2:07:26 PM Subject: Re: [mpich-devel] 404 — File not found. mpich2-1.5.tar.gz I've fixed this now. We are still getting used to our new content management system and continue to make occasional mistakes. We appreciate the bug reports. Thanks, -Dave On Nov 19, 2012, at 1:00 PM CST, Donald Moore wrote: > > Hi- > > I can't download mpich2-1.5.tar.gz since the recent update ( when mpich-3.0rc1 added_) > > -/Don > wget http://www.mpich.org/files/tarballs1.5/mpich2-1.5.tar.gz > --2012-11-19 12:54:14-- http://www.mpich.org/files/tarballs1.5/mpich2-1.5.tar.gz > Resolving www.mpich.org... 140.221.6.71 > Connecting to www.mpich.org|140.221.6.71|:80... connected. > HTTP request sent, awaiting response... 404 Not Found > 2012-11-19 12:54:14 ERROR 404: Not Found. > --- > wget http://www.mpich.org/files/tarballs1.5/hydra-1.5.tar.gz > --2012-11-19 12:59:05-- http://www.mpich.org/files/tarballs1.5/hydra-1.5.tar.gz > Resolving www.mpich.org... 140.221.6.71 > Connecting to www.mpich.org|140.221.6.71|:80... connected. > HTTP request sent, awaiting response... 404 Not Found > 2012-11-19 12:59:05 ERROR 404: Not Found. > > --- > wget http://www.mpich.org/files/tarballs/3.0rc1/mpich-3.0rc1.tar.gz > --2012-11-19 12:58:20-- http://www.mpich.org/files/tarballs/3.0rc1/mpich-3.0rc1.tar.gz > Resolving www.mpich.org... 140.221.6.71 > Connecting to www.mpich.org|140.221.6.71|:80... connected. > HTTP request sent, awaiting response... 200 OK > Length: 11107912 (11M) [application/x-gzip] > Saving to: “mpich-3.0rc1.tar.gz” > > 60% [======================> ] 6,666,208 1.68M/s eta 3s

1 0

Re: [mpich-devel] MPICH 3.0rc1 on Windows
by Dave Goodell 21 Nov '12

21 Nov '12

On Nov 21, 2012, at 4:17 PM CST, Lisandro Dalcin wrote: > Is it possible to get a build of 3.0rc1 for Windows 32bit and 64bit? I > would like to test my updates to mpi4py on these platforms. Our Windows development situation has changed over the past year, and we do not have any estimate for when Windows support/builds may become available again. It certainly will not happen within the next few weeks. -Dave

1 0

MPICH 3.0rc1 on Windows
by Lisandro Dalcin 21 Nov '12

21 Nov '12

Is it possible to get a build of 3.0rc1 for Windows 32bit and 64bit? I would like to test my updates to mpi4py on these platforms. -- Lisandro Dalcin --------------- CIMEC (INTEC/CONICET-UNL) Predio CONICET-Santa Fe Colectora RN 168 Km 472, Paraje El Pozo 3000 Santa Fe, Argentina Tel: +54-342-4511594 (ext 1011) Tel/Fax: +54-342-4511169

1 0

Re: [mpich-devel] 404 — File not found. mpich2-1.5.tar.gz,confirm
by Donald Moore 19 Nov '12

19 Nov '12

Thanks Dave- all is well -- again.. -/don wget http://www.mpich.org/files/tarballs/1.5/mpich2-1.5.tar.gz --2012-11-19 14:11:33-- http://www.mpich.org/files/tarballs/1.5/mpich2-1.5.tar.gz Resolving www.mpich.org... 140.221.6.71 Connecting to www.mpich.org|140.221.6.71|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 22826035 (22M) [application/x-gzip] Saving to: “mpich2-1.5.tar.gz” 100%[======================================>] 22,826,035 4.38M/s in 8.6s 2012-11-19 14:11:42 (2.53 MB/s) - “mpich2-1.5.tar.gz” saved [22826035/22826035] ----- Original Message ----- From: "Dave Goodell" <goodell(a)mcs.anl.gov> To: devel(a)mpich.org Sent: Monday, November 19, 2012 2:07:26 PM Subject: Re: [mpich-devel] 404 — File not found. mpich2-1.5.tar.gz I've fixed this now. We are still getting used to our new content management system and continue to make occasional mistakes. We appreciate the bug reports. Thanks, -Dave On Nov 19, 2012, at 1:00 PM CST, Donald Moore wrote: > > Hi- > > I can't download mpich2-1.5.tar.gz since the recent update ( when mpich-3.0rc1 added_) > > -/Don > wget http://www.mpich.org/files/tarballs1.5/mpich2-1.5.tar.gz > --2012-11-19 12:54:14-- http://www.mpich.org/files/tarballs1.5/mpich2-1.5.tar.gz > Resolving www.mpich.org... 140.221.6.71 > Connecting to www.mpich.org|140.221.6.71|:80... connected. > HTTP request sent, awaiting response... 404 Not Found > 2012-11-19 12:54:14 ERROR 404: Not Found. > --- > wget http://www.mpich.org/files/tarballs1.5/hydra-1.5.tar.gz > --2012-11-19 12:59:05-- http://www.mpich.org/files/tarballs1.5/hydra-1.5.tar.gz > Resolving www.mpich.org... 140.221.6.71 > Connecting to www.mpich.org|140.221.6.71|:80... connected. > HTTP request sent, awaiting response... 404 Not Found > 2012-11-19 12:59:05 ERROR 404: Not Found. > > --- > wget http://www.mpich.org/files/tarballs/3.0rc1/mpich-3.0rc1.tar.gz > --2012-11-19 12:58:20-- http://www.mpich.org/files/tarballs/3.0rc1/mpich-3.0rc1.tar.gz > Resolving www.mpich.org... 140.221.6.71 > Connecting to www.mpich.org|140.221.6.71|:80... connected. > HTTP request sent, awaiting response... 200 OK > Length: 11107912 (11M) [application/x-gzip] > Saving to: “mpich-3.0rc1.tar.gz” > > 60% [======================> ] 6,666,208 1.68M/s eta 3s

1 0

Re: [mpich-devel] 404 — File not found. mpich2-1.5.tar.gz
by Dave Goodell 19 Nov '12

19 Nov '12

I've fixed this now. We are still getting used to our new content management system and continue to make occasional mistakes. We appreciate the bug reports. Thanks, -Dave On Nov 19, 2012, at 1:00 PM CST, Donald Moore wrote: > > Hi- > > I can't download mpich2-1.5.tar.gz since the recent update ( when mpich-3.0rc1 added_) > > -/Don > wget http://www.mpich.org/files/tarballs1.5/mpich2-1.5.tar.gz > --2012-11-19 12:54:14-- http://www.mpich.org/files/tarballs1.5/mpich2-1.5.tar.gz > Resolving www.mpich.org... 140.221.6.71 > Connecting to www.mpich.org|140.221.6.71|:80... connected. > HTTP request sent, awaiting response... 404 Not Found > 2012-11-19 12:54:14 ERROR 404: Not Found. > --- > wget http://www.mpich.org/files/tarballs1.5/hydra-1.5.tar.gz > --2012-11-19 12:59:05-- http://www.mpich.org/files/tarballs1.5/hydra-1.5.tar.gz > Resolving www.mpich.org... 140.221.6.71 > Connecting to www.mpich.org|140.221.6.71|:80... connected. > HTTP request sent, awaiting response... 404 Not Found > 2012-11-19 12:59:05 ERROR 404: Not Found. > > --- > wget http://www.mpich.org/files/tarballs/3.0rc1/mpich-3.0rc1.tar.gz > --2012-11-19 12:58:20-- http://www.mpich.org/files/tarballs/3.0rc1/mpich-3.0rc1.tar.gz > Resolving www.mpich.org... 140.221.6.71 > Connecting to www.mpich.org|140.221.6.71|:80... connected. > HTTP request sent, awaiting response... 200 OK > Length: 11107912 (11M) [application/x-gzip] > Saving to: “mpich-3.0rc1.tar.gz” > > 60% [======================> ] 6,666,208 1.68M/s eta 3s

1 0

Re: [mpich-devel] MPI_Pack_external() with "long" and "double"
by Dave Goodell 19 Nov '12

19 Nov '12

Hi Lisandro, As always, thank you for your thorough testing and concrete test cases. I don't think anyone has time to look at this right away, but I've created a ticket for it so that we don't lose track: http://trac.mcs.anl.gov/projects/mpich2/ticket/1755 Best, -Dave On Nov 19, 2012, at 1:12 PM CST, Lisandro Dalcin wrote: > I understand external32 support is not fully implemented, but anyway I > want to raise your attention on this inconsistency. See the attached > file for code (BTW, I'm using 3.0rc1). > > Using "long", I get: > > $ ./a.out > Conversion of types whose size is not the same as the size in > external32 is not supported > Aborting with internal error > > However, using "double", the call succeed, but a pack->unpack > roundtrip gives bad results: > > > $ ./a.out > a.out: pack-ext32.c:42: main: Assertion `input==output' failed. > Aborted (core dumped) > > Plese fire up a debugger for the latter case and check the value of > "input" before and after the unpack call, I'm not sure what's going > on. > > -- > Lisandro Dalcin > --------------- > CIMEC (INTEC/CONICET-UNL) > Predio CONICET-Santa Fe > Colectora RN 168 Km 472, Paraje El Pozo > 3000 Santa Fe, Argentina > Tel: +54-342-4511594 (ext 1011) > Tel/Fax: +54-342-4511169 > <pack-ext32.c>

1 0

MPI_Pack_external() with "long" and "double"
by Lisandro Dalcin 19 Nov '12

19 Nov '12

I understand external32 support is not fully implemented, but anyway I want to raise your attention on this inconsistency. See the attached file for code (BTW, I'm using 3.0rc1). Using "long", I get: $ ./a.out Conversion of types whose size is not the same as the size in external32 is not supported Aborting with internal error However, using "double", the call succeed, but a pack->unpack roundtrip gives bad results: $ ./a.out a.out: pack-ext32.c:42: main: Assertion `input==output' failed. Aborted (core dumped) Plese fire up a debugger for the latter case and check the value of "input" before and after the unpack call, I'm not sure what's going on. -- Lisandro Dalcin --------------- CIMEC (INTEC/CONICET-UNL) Predio CONICET-Santa Fe Colectora RN 168 Km 472, Paraje El Pozo 3000 Santa Fe, Argentina Tel: +54-342-4511594 (ext 1011) Tel/Fax: +54-342-4511169

1 0