Hi Bruce, libhwloc must be installed on the host where you build MPICH but is missing on one of your nodes. By default when you build MPICH, it checks for system hwloc and will use the one it found rather than use the embedded one. To force use embedded -- I recommend it in your case -- add --with-hwloc=embedded to your configure option. Cheers, -- Hui ________________________________ From: Bruce Rout via discuss <[email protected]> Sent: Saturday, March 26, 2022 9:59 PM To: [email protected] <[email protected]> Cc: Bruce Rout <[email protected]> Subject: [mpich-discuss] error in installing MPICH-4.0.1: libhwloc.so.15: cannot open shared object file: No such file or directory Greetings, I have been trying for about a week to get MPICH to work. I am running Ubuntu 20.04.4 on an HP Z-600 as a master with three nodes all under NFS. NFS is working with ssh passwordless access and common hard drive directory between all four computers, (master plus three nodes). MPICH had some problems with HYDRA Proxies however a re-install with apt-get install mpich solved the problem and it worked with processors accessed on the entire array. I installed a hard drive for a different user on the master node, leaving the master user mpiuser unchanged. There was some difficulty in getting the drive to mount on the different user, but now mpich ohny works on the master node. I have reinstalled a number of times and am installing by downloading mpich-4.0.1 from http://www.mpich.org. The running of a single node works: mpiuser@BD-Main:~$ mpiexec -n 3 ./examples/cpi Invalid MIT-MAGIC-COOKIE-1 keyInvalid MIT-MAGIC-COOKIE-1 keyInvalid MIT-MAGIC-COOKIE-1 keyProcess 0 of 3 is on BD-Main Process 1 of 3 is on BD-Main Process 2 of 3 is on BD-Main pi is approximately 3.1415926544231318, Error is 0.0000000008333387 wall clock time = 0.002317 mpiuser@BD-Main:~$ and there is an invalid key somewhere in that output. Machinefile contains the following: (This is the host file???) mpiuser@BD-Main:~$ more machinefile node1:4 node2:2 node3:4 mpiuser@BD-Main:~$ And there is the following error with multiple nodes: mpiuser@BD-Main:~$ mpiexec -f machinefile -n 3 ./examples/cpi /home/mpiuser/mpich-install/bin/hydra_pmi_proxy: error while loading shared libraries: libhwloc.so.15: cannot open shared object file: No such file or directory ^C[mpiexec@BD-Main] Sending Ctrl-C to processes as requested [mpiexec@BD-Main] Press Ctrl-C again to force abort [mpiexec@BD-Main] HYDU_sock_write (utils/sock/sock.c:254): write error (Bad file descriptor) [mpiexec@BD-Main] HYD_pmcd_pmiserv_send_signal (pm/pmiserv/pmiserv_cb.c:176): unable to write data to proxy [mpiexec@BD-Main] ui_cmd_cb (pm/pmiserv/pmiserv_pmci.c:42): unable to send signal downstream [mpiexec@BD-Main] HYDT_dmxu_poll_wait_for_event (tools/demux/demux_poll.c:76): callback returned error status [mpiexec@BD-Main] HYD_pmci_wait_for_completion (pm/pmiserv/pmiserv_pmci.c:160): error waiting for event [mpiexec@BD-Main] main (ui/mpich/mpiexec.c:325): process manager error waiting for completion mpiuser@BD-Main:~$ The program hangs after the first error message /home/mpiuser/mpich-install/bin/hydra_pmi_proxy: error while loading shared libraries: libhwloc.so.15: cannot open shared object file: No such file or directory and had to exit with ctl-c. I have hunted everywhere for libhwloc.so.15 and found two rpm files hwloc-libs-1.11.8-4.el7.x86_64.rpm and hwloc-2.7.1.tar.bz2 which I managed to download but cannot install the librarires. Synaptic is not help since the repository for hwloc is not installed. Another indication of a problem is that the file cp mpich4.0.1/src/pm/hydra/tools/topo/hwloc/hwloc/config.log is missing from the ./configure step. Obviously it is not included in the zipped files attached here. The configure, make and make install steps ran without a hitch and without error. This is the output of mpich -info mpiuser@BD-Main:~$ mpiexec -info HYDRA build details: Version: 4.0.1 Release Date: Tue Feb 22 16:37:51 CST 2022 CC: gcc Configure options: '--disable-option-checking' '--prefix=/home/mpiuser/mpich-install' '--cache-file=/dev/null' '--srcdir=.' 'CC=gcc' 'CFLAGS= ' 'LDFLAGS=' 'LIBS=' 'CPPFLAGS= ' Process Manager: pmi Launchers available: ssh rsh fork slurm ll lsf sge manual persist Topology libraries available: hwloc Resource management kernels available: user slurm ll lsf sge pbs cobalt Demux engines available: poll select mpiuser@BD-Main:~$ The master node is BD-Main and this is the output of /etc/hosts which is similar on all nodes: mpiuser@BD-Main:~$ more /etc/hosts 127.0.0.1 localhost 127.0.1.1 BD-Main # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters # The following sets up the local network for cluster 10.0.0.1 master 10.0.0.2 node1 10.0.0.3 node2 10.0.0.4 node3 As I have mentioned before, this set-up seems to have worked and NFS is working well. I have purged both hydra and mpich and then reinstalled mpich-4.0.1 according to the instructions in the README fiel. Any help would be greatly appreciated. Thank you for your time. Yours, Bruce