March 2014 - discuss - mailman3.cels.anl.gov

Re: [mpich-discuss] mpich-3.1 (stable release): make error.
by Jorge D'Elia 23 Mar '14

23 Mar '14

Here I send the files obtained using only the prefix option (c.txt, m.txt and config.log). Regards, Jorge. ----- Mensaje original ----- > De: "Rajeev Thakur" <thakur(a)mcs.anl.gov> > Para: discuss(a)mpich.org > CC: mpich-discuss(a)mcs.anl.gov > Enviado: Sábado, 22 de Marzo 2014 23:46:25 > Asunto: Re: [mpich-discuss] mpich-3.1 (stable release): make error. > > Can you try configuring with just the --prefix option. > > Rajeev > > On Mar 22, 2014, at 12:01 PM, Jorge D'Elia <jdelia(a)intec.unl.edu.ar> > wrote: > > > Hi, > > > > I tried to install mpich-3.1 (stable release) but I find an > > error in the build step. I attached the files c.txt (configure > > step) and m.txt (make step with the VERBOSE=1 value). > > Please, any clue? Thanks in advance. Regards. Jorge. > > > > CIMEC (UNL-CONICET) Predio CONICET-Santa Fe, Colectora Ruta Nac 168, > > Paraje El Pozo, S3000GLN Santa Fe, ARGENTINA, http://www.cimec.org.ar/ > > Tel +54 342 451.15.94/95 ext 1018, fax: +54-342-451.11.69 > > <c.txt><m.txt>_______________________________________________ > > discuss mailing list discuss(a)mpich.org > > To manage subscription options or unsubscribe: > > https://lists.mpich.org/mailman/listinfo/discuss > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss >

1 0

Re: [mpich-discuss] mpich-3.1 (stable release): make error.
by Rajeev Thakur 22 Mar '14

22 Mar '14

Can you try configuring with just the --prefix option. Rajeev On Mar 22, 2014, at 12:01 PM, Jorge D'Elia <jdelia(a)intec.unl.edu.ar> wrote: > Hi, > > I tried to install mpich-3.1 (stable release) but I find an > error in the build step. I attached the files c.txt (configure > step) and m.txt (make step with the VERBOSE=1 value). > Please, any clue? Thanks in advance. Regards. Jorge. > > CIMEC (UNL-CONICET) Predio CONICET-Santa Fe, Colectora Ruta Nac 168, > Paraje El Pozo, S3000GLN Santa Fe, ARGENTINA, http://www.cimec.org.ar/ > Tel +54 342 451.15.94/95 ext 1018, fax: +54-342-451.11.69 > <c.txt><m.txt>_______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] mpich-3.1 (stable release): make error.
by Jorge D'Elia 22 Mar '14

22 Mar '14

----- Mensaje original ----- > De: "Kenneth Raffenetti" <raffenet(a)mcs.anl.gov> > Para: discuss(a)mpich.org, mpich-discuss(a)mcs.anl.gov > Enviado: Sábado, 22 de Marzo 2014 14:30:51 > Asunto: Re: [mpich-discuss] mpich-3.1 (stable release): make error. > > Can you also send your config.log file? That should tell us more about > your platform. Dear Kenneth: Yes of course! I'm sorry. Here I send the 3 compressed archives (well, before I had followed the instructions given on page 3 of the MPICH version 3.1 Installation Guide, then I saw that the README file had more details (I need an extra cup of coffee...)). Thanks. Regards. Jorge. > On 03/22/2014 12:19 PM, Jorge D'Elia wrote: > > Dear all, > > > > I apologize for sending the c.txt and m.txt files without > > compressing. I reread the README file in more detail, i.e. > > > >> DID WE MENTION? DO NOT FORGET TO COMPRESS THESE FILES! > > > > after sending ... > > > > Regards, > > Jorge. > > > > ----- Mensaje original ----- > >> De: "Jorge D'Elia" <jdelia(a)intec.unl.edu.ar> > >> Para: mpich-discuss(a)mcs.anl.gov > >> Enviados: Sábado, 22 de Marzo 2014 14:01:05 > >> Asunto: [mpich-discuss] mpich-3.1 (stable release): make error. > >> > >> Hi, > >> > >> I tried to install mpich-3.1 (stable release) but I find an > >> error in the build step. I attached the files c.txt (configure > >> step) and m.txt (make step with the VERBOSE=1 value). > >> Please, any clue? Thanks in advance. Regards. Jorge. > >> > >> CIMEC (UNL-CONICET) Predio CONICET-Santa Fe, Colectora Ruta Nac 168, > >> Paraje El Pozo, S3000GLN Santa Fe, ARGENTINA, http://www.cimec.org.ar/ > >> Tel +54 342 451.15.94/95 ext 1018, fax: +54-342-451.11.69 > >> > >> _______________________________________________ > >> discuss mailing list discuss(a)mpich.org > >> To manage subscription options or unsubscribe: > >> https://lists.mpich.org/mailman/listinfo/discuss > > _______________________________________________ > > discuss mailing list discuss(a)mpich.org > > To manage subscription options or unsubscribe: > > https://lists.mpich.org/mailman/listinfo/discuss > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] mpich-3.1 (stable release): make error.
by Kenneth Raffenetti 22 Mar '14

22 Mar '14

Can you also send your config.log file? That should tell us more about your platform. On 03/22/2014 12:19 PM, Jorge D'Elia wrote: > Dear all, > > I apologize for sending the c.txt and m.txt files without > compressing. I reread the README file in more detail, i.e. > >> DID WE MENTION? DO NOT FORGET TO COMPRESS THESE FILES! > > after sending ... > > Regards, > Jorge. > > ----- Mensaje original ----- >> De: "Jorge D'Elia" <jdelia(a)intec.unl.edu.ar> >> Para: mpich-discuss(a)mcs.anl.gov >> Enviados: Sábado, 22 de Marzo 2014 14:01:05 >> Asunto: [mpich-discuss] mpich-3.1 (stable release): make error. >> >> Hi, >> >> I tried to install mpich-3.1 (stable release) but I find an >> error in the build step. I attached the files c.txt (configure >> step) and m.txt (make step with the VERBOSE=1 value). >> Please, any clue? Thanks in advance. Regards. Jorge. >> >> CIMEC (UNL-CONICET) Predio CONICET-Santa Fe, Colectora Ruta Nac 168, >> Paraje El Pozo, S3000GLN Santa Fe, ARGENTINA, http://www.cimec.org.ar/ >> Tel +54 342 451.15.94/95 ext 1018, fax: +54-342-451.11.69 >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss >

1 0

Re: [mpich-discuss] mpich-3.1 (stable release): make error.
by Jorge D'Elia 22 Mar '14

22 Mar '14

Dear all, I apologize for sending the c.txt and m.txt files without compressing. I reread the README file in more detail, i.e. > DID WE MENTION? DO NOT FORGET TO COMPRESS THESE FILES! after sending ... Regards, Jorge. ----- Mensaje original ----- > De: "Jorge D'Elia" <jdelia(a)intec.unl.edu.ar> > Para: mpich-discuss(a)mcs.anl.gov > Enviados: Sábado, 22 de Marzo 2014 14:01:05 > Asunto: [mpich-discuss] mpich-3.1 (stable release): make error. > > Hi, > > I tried to install mpich-3.1 (stable release) but I find an > error in the build step. I attached the files c.txt (configure > step) and m.txt (make step with the VERBOSE=1 value). > Please, any clue? Thanks in advance. Regards. Jorge. > > CIMEC (UNL-CONICET) Predio CONICET-Santa Fe, Colectora Ruta Nac 168, > Paraje El Pozo, S3000GLN Santa Fe, ARGENTINA, http://www.cimec.org.ar/ > Tel +54 342 451.15.94/95 ext 1018, fax: +54-342-451.11.69 > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0

mpich-3.1 (stable release): make error.
by Jorge D'Elia 22 Mar '14

22 Mar '14

Hi, I tried to install mpich-3.1 (stable release) but I find an error in the build step. I attached the files c.txt (configure step) and m.txt (make step with the VERBOSE=1 value). Please, any clue? Thanks in advance. Regards. Jorge. CIMEC (UNL-CONICET) Predio CONICET-Santa Fe, Colectora Ruta Nac 168, Paraje El Pozo, S3000GLN Santa Fe, ARGENTINA, http://www.cimec.org.ar/ Tel +54 342 451.15.94/95 ext 1018, fax: +54-342-451.11.69

1 0

Re: [mpich-discuss] Comm_spawn with win_create
by Jim Dinan 19 Mar '14

19 Mar '14

An additional suggestion: The inter-communicator can be converted to an intra-communicator using MPI_Intercomm_merge. The communicator produced by the merge could be used to create an RMA window. On Mon, Mar 17, 2014 at 8:46 PM, Rajeev Thakur <thakur(a)mcs.anl.gov> wrote: > The communicator passed to Win_create must be an intra-communicator, not > inter-communicator. (MPI-3 pg 405). > > On Mar 17, 2014, at 5:44 PM, Ramesh Vinayagam <rvinayagam.85(a)gmail.com> > wrote: > > > Hi, > > > > Can comm_spawn be used with win_create. > > For ex: > > Master process: > > MPI_Comm_spawn(worker_program,MPI_ARGV_NULL, world_size-1, > > info, 0, MPI_COMM_SELF, &everyone, > > MPI_ERRCODES_IGNORE); > > > > MPI_Win_create(&testval, sizeof(double), 1, > > MPI_INFO_NULL, everyone, > > &nwin); > > > > Worker process: > > MPI_Comm_get_parent(&parent); > > if (parent == MPI_COMM_NULL) error("No parent!"); > > MPI_Comm_remote_size(parent, &size); > > if (size != 1) error("Something's wrong with the parent"); > > > > fprintf (stdout,"Size: %zd\n", size); > > system("echo $NUM_THREADS"); > > > > MPI_Win_create(MPI_BOTTOM, 0, > > 1, MPI_INFO_NULL, > > parent, &nwin); > > > > > > > > This one fails currently. Am I doing something wrong. It would be great > if someone could help me. > > > > Thanks > > Ramesh > > _______________________________________________ > > discuss mailing list discuss(a)mpich.org > > To manage subscription options or unsubscribe: > > https://lists.mpich.org/mailman/listinfo/discuss > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss >

1 0

Re: [mpich-discuss] installation of mpich2 failed
by Wesley Bland 19 Mar '14

19 Mar '14

Unfortunately, we don't support Windows directly anymore. You can find out more at the FAQ page: http://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_can… Thanks, Wesley On Wed, Mar 19, 2014 at 9:34 AM, Limin Liu <lemon_liu(a)foxmail.com> wrote: > sir > I need your help as an error message often occurred .It was 'LENOVO-PC error > = LENOVO-PC: MPICH2 not installed or unable to query the host' > I had closed the firewall according to the instruction.My version of > MPICH2 was 'mpich2-1.4.1p1-win-x86-64' and my computer is operating on > Win7-64 system. > I really need a solution to the problem. > Thank you very much. > Your sincerely. > > ------------------ > *Lm Liu* > *School of Energy and Power Engineering of Xi'an Jiaotong University* > *No.28, Xianning West Road, Xi'an, Shaanxi, 710049,P.R.China* > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss >

1 0

installation of mpich2 failed
by Limin Liu 19 Mar '14

19 Mar '14

sir I need your help as an error message often occurred .It was 'LENOVO-PC error = LENOVO-PC: MPICH2 not installed or unable to query the host' I had closed the firewall according to the instruction.My version of MPICH2 was 'mpich2-1.4.1p1-win-x86-64' and my computer is operating on Win7-64 system. I really need a solution to the problem. Thank you very much. Your sincerely. ------------------ Lm Liu School of Energy and Power Engineering of Xi'an Jiaotong University No.28, Xianning West Road, Xi'an, Shaanxi, 710049,P.R.China

1 0

Re: [mpich-discuss] Comm_spawn with win_create
by Rajeev Thakur 17 Mar '14

17 Mar '14

The communicator passed to Win_create must be an intra-communicator, not inter-communicator. (MPI-3 pg 405). On Mar 17, 2014, at 5:44 PM, Ramesh Vinayagam <rvinayagam.85(a)gmail.com> wrote: > Hi, > > Can comm_spawn be used with win_create. > For ex: > Master process: > MPI_Comm_spawn(worker_program,MPI_ARGV_NULL, world_size-1, > info, 0, MPI_COMM_SELF, &everyone, > MPI_ERRCODES_IGNORE); > > MPI_Win_create(&testval, sizeof(double), 1, > MPI_INFO_NULL, everyone, > &nwin); > > Worker process: > MPI_Comm_get_parent(&parent); > if (parent == MPI_COMM_NULL) error("No parent!"); > MPI_Comm_remote_size(parent, &size); > if (size != 1) error("Something's wrong with the parent"); > > fprintf (stdout,"Size: %zd\n", size); > system("echo $NUM_THREADS"); > > MPI_Win_create(MPI_BOTTOM, 0, > 1, MPI_INFO_NULL, > parent, &nwin); > > > > This one fails currently. Am I doing something wrong. It would be great if someone could help me. > > Thanks > Ramesh > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0