August 2014 - discuss - mailman3.cels.anl.gov

Re: [mpich-discuss] make error mpich2-1.4.1p1
by Reuti 08 Aug '14

08 Aug '14

Am 08.08.2014 um 09:47 schrieb HEINZ Josef (AREVA): > I am trying to install mpich2-1.4.1p1 but I am getting the same error every time. > I was able to install an older version mpich-3.0.4 without any problems and it is working fine. Why do you think it's older? The 3-series is the actual one, being now at 3.1.2. So it should be fine to use the one you compiled successfully. -- Reuti > Attached you´ll find the logfiles for the config and make steps for mpich2-1.4.1p1. > > Thank you very much in advance. If you need any information please don´t hesitate to ask for it. > > Best regards. > Josef HEINZ > > > <logfile_config.txt><logfile_make.txt>_______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0

make error mpich2-1.4.1p1
by HEINZ Josef (AREVA) 08 Aug '14

08 Aug '14

Hello, I am trying to install mpich2-1.4.1p1 but I am getting the same error every time. I was able to install an older version mpich-3.0.4 without any problems and it is working fine. Attached you´ll find the logfiles for the config and make steps for mpich2-1.4.1p1. Thank you very much in advance. If you need any information please don´t hesitate to ask for it. Best regards. Josef HEINZ

1 0

Re: [mpich-discuss] Problem installing MPICH
by Sahar Amir 05 Aug '14

05 Aug '14

Thank you guys very much ... It is working now ... [?] ... I used: ./configure --prefix=/Directory --disable-fortran --disable-maintainer-mode | tee c.log Regards, Sahar On Tue, Aug 5, 2014 at 5:45 PM, Balaji, Pavan <balaji(a)anl.gov> wrote: > > Usually the issue in such cases is that the user built MPICH on an NFS or > some other weird filesystem, which screwed up the time stamps and now > “make” seems to think that it needs to rerun autoreconf. > > Sahar, you can pass --disable-maintainer-mode to configure to ask it to > not try to be extra smart. > > — Pavan > > On Aug 5, 2014, at 2:13 PM, Bland, Wesley B. <wbland(a)anl.gov> wrote: > > > In that case, I’m not really sure what could be causing your issue. I > would try installing the correct versions of the autotools as a stopgap. > That should at the very least let you get your installation going. > > > >> On Aug 5, 2014, at 1:59 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa> wrote: > >> > >> > >> I don't think I made any modification I only removed the FORTRAN option > like this: > >> ./configure --prefix=/Data_1/MPICH/MPICHsoftware --disable-fortran | > tee c.log > >> > >> > >> On Tue, Aug 5, 2014 at 1:09 PM, Bland, Wesley B. <wbland(a)anl.gov> > wrote: > >> Are you making modifications to the autoconf files? If so, you’ll need > to re-run autogen.sh and make sure that you have all of the autotools > installed correctly (as per the wiki page: > http://wiki.mpich.org/mpich/index.php/Getting_And_Building_MPICH#Setting_up… > ). > >> > >>> On Aug 5, 2014, at 1:04 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa> > wrote: > >>> > >>> > >>> Dear Wesley, > >>> > >>> Attached is my .log file ... > >>> I need to do it this way for further modification I will be testing in > a workshop I am attending right now ... > >>> > >>> Will you help me fix it please ... > >>> > >>> Thank you very much ... <330.gif> ... > >>> > >>> Regards, > >>> Sahar > >>> > >>> > >>> > >>> On Tue, Aug 5, 2014 at 10:23 AM, Bland, Wesley B. <wbland(a)anl.gov> > wrote: > >>> This looks like you might not have run the configure script correctly > before running make. Can you send your config.log? > >>> > >>> Also, is there a particular reason that you need to install MPICH from > source. It’s usually easier to just grab one of the versions that installs > automatically. For Mac’s the recommended way of doing this is to use > Homebrew. You can find more information on the Downloads page. For most > installations (unless you’re using some non-default features), this is > sufficient. > >>> > >>> Thanks, > >>> Wesley > >>> > >>>> On Aug 5, 2014, at 10:17 AM, Sahar Amir <sahar.amir(a)kaust.edu.sa> > wrote: > >>>> > >>>> > >>>> Good morning, > >>>> > >>>> I am trying to install MPICH on my mac. however when I try to apply > the instruction make 2>&1 | tee m.log > >>>> > >>>> It gives: > >>>> CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh > /Data_1/mpich-3.1.2/confdb/missing aclocal-1.14 -I confdb > >>>> /Data_1/mpich-3.1.2/confdb/missing: line 81: aclocal-1.14: command > not found > >>>> WARNING: 'aclocal-1.14' is missing on your system. > >>>> You should only need it if you modified 'acinclude.m4' or > >>>> 'configure.ac' or m4 files included by 'configure.ac'. > >>>> The 'aclocal' program is part of the GNU Automake package: > >>>> <http://www.gnu.org/software/automake> > >>>> It also requires GNU Autoconf, GNU m4 and Perl in order to > run: > >>>> <http://www.gnu.org/software/autoconf> > >>>> <http://www.gnu.org/software/m4/> > >>>> <http://www.perl.org/> > >>>> make: *** [aclocal.m4] Error 127 > >>>> > >>>> > >>>> Regards, > >>>> Sahar > >>>> > >>>> This message and its contents, including attachments are intended > solely for the original recipient. If you are not the intended recipient or > have received this message in error, please notify me immediately and > delete this message from your computer system. Any unauthorized use or > distribution is prohibited. Please consider the environment before printing > this email._______________________________________________ > >>>> discuss mailing list discuss(a)mpich.org > >>>> To manage subscription options or unsubscribe: > >>>> https://lists.mpich.org/mailman/listinfo/discuss > >>> > >>> > >>> _______________________________________________ > >>> discuss mailing list discuss(a)mpich.org > >>> To manage subscription options or unsubscribe: > >>> https://lists.mpich.org/mailman/listinfo/discuss > >>> > >>> > >>> This message and its contents, including attachments are intended > solely for the original recipient. If you are not the intended recipient or > have received this message in error, please notify me immediately and > delete this message from your computer system. Any unauthorized use or > distribution is prohibited. Please consider the environment before printing > this email.<config.log>_______________________________________________ > >>> > >>> discuss mailing list discuss(a)mpich.org > >>> To manage subscription options or unsubscribe: > >>> https://lists.mpich.org/mailman/listinfo/discuss > >> > >> > >> _______________________________________________ > >> discuss mailing list discuss(a)mpich.org > >> To manage subscription options or unsubscribe: > >> https://lists.mpich.org/mailman/listinfo/discuss > >> > >> > >> This message and its contents, including attachments are intended > solely for the original recipient. If you are not the intended recipient or > have received this message in error, please notify me immediately and > delete this message from your computer system. Any unauthorized use or > distribution is prohibited. Please consider the environment before printing > this email._______________________________________________ > >> discuss mailing list discuss(a)mpich.org > >> To manage subscription options or unsubscribe: > >> https://lists.mpich.org/mailman/listinfo/discuss > > > > _______________________________________________ > > discuss mailing list discuss(a)mpich.org > > To manage subscription options or unsubscribe: > > https://lists.mpich.org/mailman/listinfo/discuss > > -- > Pavan Balaji ✉️ > http://www.mcs.anl.gov/~balaji > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > -- ------------------------------ This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email.

1 0

Re: [mpich-discuss] mpich/hydra error while running my model
by Balaji, Pavan 05 Aug '14

05 Aug '14

The error message seems to point out the problem: > memcpy argument memory ranges overlap, dst_=0x2b1e91fd2010 src_=0x2b1e91fd2024 len_=496128 — Pavan On Aug 5, 2014, at 3:38 PM, Chun Meng <miracle.chun.2010(a)gmail.com> wrote: > Hi All, > I have mpich-3.1.2 and hydra-3.1.2 installed in the /opt directory on the cluster which I run a regional climate model on. > Now ,I got a error message listed here in red.Anyone have any idea about this? > Thanks a lot!Any help is appreciated! > > > Assertion failed in file src/mpi/datatype/unpack.c at line 60: FALSE > memcpy argument memory ranges overlap, dst_=0x2b1e91fd2010 src_=0x2b1e91fd2024 len_=496128 > > internal ABORT - process 0 > [proxy:0:1@C006] HYD_pmcd_pmip_control_cmd_cb (pm/pmiserv/pmip_cb.c:885): assert (!closed) failed > [proxy:0:1@C006] HYDT_dmxu_poll_wait_for_event (tools/demux/demux_poll.c:76): callback returned error status > [proxy:0:1@C006] main (pm/pmiserv/pmip.c:206): demux engine error waiting for event > [mpiexec@C001] HYDT_bscu_wait_for_completion (tools/bootstrap/utils/bscu_wait.c:75): one of the processes terminated badly; aborting > [mpiexec@C001] HYDT_bsci_wait_for_completion (tools/bootstrap/src/bsci_wait.c:23): launcher returned error waiting for completion > [mpiexec@C001] HYD_pmci_wait_for_completion (pm/pmiserv/pmiserv_pmci.c:218): launcher returned error waiting for completion > > Best, > Chun > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss -- Pavan Balaji ✉️ http://www.mcs.anl.gov/~balaji

1 0

Re: [mpich-discuss] Problem installing MPICH
by Balaji, Pavan 05 Aug '14

05 Aug '14

Usually the issue in such cases is that the user built MPICH on an NFS or some other weird filesystem, which screwed up the time stamps and now “make” seems to think that it needs to rerun autoreconf. Sahar, you can pass --disable-maintainer-mode to configure to ask it to not try to be extra smart. — Pavan On Aug 5, 2014, at 2:13 PM, Bland, Wesley B. <wbland(a)anl.gov> wrote: > In that case, I’m not really sure what could be causing your issue. I would try installing the correct versions of the autotools as a stopgap. That should at the very least let you get your installation going. > >> On Aug 5, 2014, at 1:59 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa> wrote: >> >> >> I don't think I made any modification I only removed the FORTRAN option like this: >> ./configure --prefix=/Data_1/MPICH/MPICHsoftware --disable-fortran | tee c.log >> >> >> On Tue, Aug 5, 2014 at 1:09 PM, Bland, Wesley B. <wbland(a)anl.gov> wrote: >> Are you making modifications to the autoconf files? If so, you’ll need to re-run autogen.sh and make sure that you have all of the autotools installed correctly (as per the wiki page: http://wiki.mpich.org/mpich/index.php/Getting_And_Building_MPICH#Setting_up…) >> >>> On Aug 5, 2014, at 1:04 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa> wrote: >>> >>> >>> Dear Wesley, >>> >>> Attached is my .log file ... >>> I need to do it this way for further modification I will be testing in a workshop I am attending right now ... >>> >>> Will you help me fix it please ... >>> >>> Thank you very much ... <330.gif> ... >>> >>> Regards, >>> Sahar >>> >>> >>> >>> On Tue, Aug 5, 2014 at 10:23 AM, Bland, Wesley B. <wbland(a)anl.gov> wrote: >>> This looks like you might not have run the configure script correctly before running make. Can you send your config.log? >>> >>> Also, is there a particular reason that you need to install MPICH from source. It’s usually easier to just grab one of the versions that installs automatically. For Mac’s the recommended way of doing this is to use Homebrew. You can find more information on the Downloads page. For most installations (unless you’re using some non-default features), this is sufficient. >>> >>> Thanks, >>> Wesley >>> >>>> On Aug 5, 2014, at 10:17 AM, Sahar Amir <sahar.amir(a)kaust.edu.sa> wrote: >>>> >>>> >>>> Good morning, >>>> >>>> I am trying to install MPICH on my mac. however when I try to apply the instruction make 2>&1 | tee m.log >>>> >>>> It gives: >>>> CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /Data_1/mpich-3.1.2/confdb/missing aclocal-1.14 -I confdb >>>> /Data_1/mpich-3.1.2/confdb/missing: line 81: aclocal-1.14: command not found >>>> WARNING: 'aclocal-1.14' is missing on your system. >>>> You should only need it if you modified 'acinclude.m4' or >>>> 'configure.ac' or m4 files included by 'configure.ac'. >>>> The 'aclocal' program is part of the GNU Automake package: >>>> <http://www.gnu.org/software/automake> >>>> It also requires GNU Autoconf, GNU m4 and Perl in order to run: >>>> <http://www.gnu.org/software/autoconf> >>>> <http://www.gnu.org/software/m4/> >>>> <http://www.perl.org/> >>>> make: *** [aclocal.m4] Error 127 >>>> >>>> >>>> Regards, >>>> Sahar >>>> >>>> This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email._______________________________________________ >>>> discuss mailing list discuss(a)mpich.org >>>> To manage subscription options or unsubscribe: >>>> https://lists.mpich.org/mailman/listinfo/discuss >>> >>> >>> _______________________________________________ >>> discuss mailing list discuss(a)mpich.org >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/discuss >>> >>> >>> This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email.<config.log>_______________________________________________ >>> >>> discuss mailing list discuss(a)mpich.org >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/discuss >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> >> >> This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email._______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss -- Pavan Balaji ✉️ http://www.mcs.anl.gov/~balaji

1 0

Re: [mpich-discuss] Problem installing MPICH
by Eric A. Borisch 05 Aug '14

05 Aug '14

FWIW, you can install a fortran-disabled version from MacPorts with 'sudo port install mpich-default -gcc48'; a number of other versions wrapping different compilers are also available, see 'port info mpich'. Or if you install just 'mpich-default' (which will also install gcc48 for fortran support) everything should come down as precompiled packages for a fast install. - Eric On Tue, Aug 5, 2014 at 1:59 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa> wrote: > > I don't think I made any modification I only removed the FORTRAN option > like this: > ./configure --prefix=/Data_1/MPICH/MPICHsoftware --disable-fortran | tee > c.log > > > On Tue, Aug 5, 2014 at 1:09 PM, Bland, Wesley B. <wbland(a)anl.gov> wrote: > >> Are you making modifications to the autoconf files? If so, you’ll need >> to re-run autogen.sh and make sure that you have all of the autotools >> installed correctly (as per the wiki page: >> http://wiki.mpich.org/mpich/index.php/Getting_And_Building_MPICH#Setting_up…) >> >> >> On Aug 5, 2014, at 1:04 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa> wrote: >> >> >> Dear Wesley, >> >> Attached is my .log file ... >> I need to do it this way for further modification I will be testing in a >> workshop I am attending right now ... >> >> Will you help me fix it please ... >> >> Thank you very much ... <330.gif> ... >> >> Regards, >> Sahar >> >> >> >> On Tue, Aug 5, 2014 at 10:23 AM, Bland, Wesley B. <wbland(a)anl.gov> wrote: >> >>> This looks like you might not have run the configure script correctly >>> before running make. Can you send your config.log? >>> >>> Also, is there a particular reason that you need to install MPICH from >>> source. It’s usually easier to just grab one of the versions that installs >>> automatically. For Mac’s the recommended way of doing this is to use >>> Homebrew. You can find more information on the Downloads page. For most >>> installations (unless you’re using some non-default features), this is >>> sufficient. >>> >>> Thanks, >>> Wesley >>> >>> On Aug 5, 2014, at 10:17 AM, Sahar Amir <sahar.amir(a)kaust.edu.sa> >>> wrote: >>> >>> >>> Good morning, >>> >>> I am trying to install MPICH on my mac. however when I try to apply the >>> instruction make 2>&1 | tee m.log >>> >>> It gives: >>> CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh >>> /Data_1/mpich-3.1.2/confdb/missing aclocal-1.14 -I confdb >>> /Data_1/mpich-3.1.2/confdb/missing: line 81: aclocal-1.14: command not >>> found >>> WARNING: 'aclocal-1.14' is missing on your system. >>> You should only need it if you modified 'acinclude.m4' or >>> 'configure.ac' or m4 files included by 'configure.ac'. >>> The 'aclocal' program is part of the GNU Automake package: >>> <http://www.gnu.org/software/automake> >>> It also requires GNU Autoconf, GNU m4 and Perl in order to run: >>> <http://www.gnu.org/software/autoconf> >>> <http://www.gnu.org/software/m4/> >>> <http://www.perl.org/> >>> make: *** [aclocal.m4] Error 127 >>> >>> >>> Regards, >>> Sahar >>> >>> ------------------------------ >>> This message and its contents, including attachments are intended >>> solely for the original recipient. If you are not the intended recipient or >>> have received this message in error, please notify me immediately and >>> delete this message from your computer system. Any unauthorized use or >>> distribution is prohibited. Please consider the environment before printing >>> this email._______________________________________________ >>> discuss mailing list discuss(a)mpich.org >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/discuss >>> >>> >>> >>> _______________________________________________ >>> discuss mailing list discuss(a)mpich.org >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/discuss >>> >> >> >> ------------------------------ >> This message and its contents, including attachments are intended >> solely for the original recipient. If you are not the intended recipient or >> have received this message in error, please notify me immediately and >> delete this message from your computer system. Any unauthorized use or >> distribution is prohibited. Please consider the environment before printing >> this email.<config.log>_______________________________________________ >> >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> > > > ------------------------------ > This message and its contents, including attachments are intended solely > for the original recipient. If you are not the intended recipient or have > received this message in error, please notify me immediately and delete > this message from your computer system. Any unauthorized use or > distribution is prohibited. Please consider the environment before printing > this email. > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss >

1 0

mpich/hydra error while running my model
by Chun Meng 05 Aug '14

05 Aug '14

Hi All, I have mpich-3.1.2 and hydra-3.1.2 installed in the /opt directory on the cluster which I run a regional climate model on. Now ,I got a error message listed here in red.Anyone have any idea about this? Thanks a lot!Any help is appreciated! Assertion failed in file src/mpi/datatype/unpack.c at line 60: FALSE memcpy argument memory ranges overlap, dst_=0x2b1e91fd2010 src_=0x2b1e91fd2024 len_=496128 internal ABORT - process 0 [proxy:0:1@C006] HYD_pmcd_pmip_control_cmd_cb (pm/pmiserv/pmip_cb.c:885): assert (!closed) failed [proxy:0:1@C006] HYDT_dmxu_poll_wait_for_event (tools/demux/demux_poll.c:76): callback returned error status [proxy:0:1@C006] main (pm/pmiserv/pmip.c:206): demux engine error waiting for event [mpiexec@C001] HYDT_bscu_wait_for_completion (tools/bootstrap/utils/bscu_wait.c:75): one of the processes terminated badly; aborting [mpiexec@C001] HYDT_bsci_wait_for_completion (tools/bootstrap/src/bsci_wait.c:23): launcher returned error waiting for completion [mpiexec@C001] HYD_pmci_wait_for_completion (pm/pmiserv/pmiserv_pmci.c:218): launcher returned error waiting for completion Best, Chun

1 0

Re: [mpich-discuss] Problem installing MPICH
by Bland, Wesley B. 05 Aug '14

05 Aug '14

In that case, I’m not really sure what could be causing your issue. I would try installing the correct versions of the autotools as a stopgap. That should at the very least let you get your installation going. On Aug 5, 2014, at 1:59 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa<mailto:[email protected]>> wrote: I don't think I made any modification I only removed the FORTRAN option like this: ./configure --prefix=/Data_1/MPICH/MPICHsoftware --disable-fortran | tee c.log On Tue, Aug 5, 2014 at 1:09 PM, Bland, Wesley B. <wbland(a)anl.gov<mailto:[email protected]>> wrote: Are you making modifications to the autoconf files? If so, you’ll need to re-run autogen.sh and make sure that you have all of the autotools installed correctly (as per the wiki page: http://wiki.mpich.org/mpich/index.php/Getting_And_Building_MPICH#Setting_up…) On Aug 5, 2014, at 1:04 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa<mailto:[email protected]>> wrote: Dear Wesley, Attached is my .log file ... I need to do it this way for further modification I will be testing in a workshop I am attending right now ... Will you help me fix it please ... Thank you very much ... <330.gif> ... Regards, Sahar On Tue, Aug 5, 2014 at 10:23 AM, Bland, Wesley B. <wbland(a)anl.gov<mailto:[email protected]>> wrote: This looks like you might not have run the configure script correctly before running make. Can you send your config.log? Also, is there a particular reason that you need to install MPICH from source. It’s usually easier to just grab one of the versions that installs automatically. For Mac’s the recommended way of doing this is to use Homebrew. You can find more information on the Downloads page. For most installations (unless you’re using some non-default features), this is sufficient. Thanks, Wesley On Aug 5, 2014, at 10:17 AM, Sahar Amir <sahar.amir(a)kaust.edu.sa<mailto:[email protected]>> wrote: Good morning, I am trying to install MPICH on my mac. however when I try to apply the instruction make 2>&1 | tee m.log It gives: CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /Data_1/mpich-3.1.2/confdb/missing aclocal-1.14 -I confdb /Data_1/mpich-3.1.2/confdb/missing: line 81: aclocal-1.14: command not found WARNING: 'aclocal-1.14' is missing on your system. You should only need it if you modified 'acinclude.m4' or 'configure.ac<http://configure.ac/>' or m4 files included by 'configure.ac<http://configure.ac/>'. The 'aclocal' program is part of the GNU Automake package: <http://www.gnu.org/software/automake> It also requires GNU Autoconf, GNU m4 and Perl in order to run: <http://www.gnu.org/software/autoconf> <http://www.gnu.org/software/m4/> <http://www.perl.org/> make: *** [aclocal.m4] Error 127 Regards, Sahar ________________________________ This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email._______________________________________________ discuss mailing list discuss(a)mpich.org<mailto:[email protected]> To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss _______________________________________________ discuss mailing list discuss(a)mpich.org<mailto:[email protected]> To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss ________________________________ This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email.<config.log>_______________________________________________ discuss mailing list discuss(a)mpich.org<mailto:[email protected]> To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss _______________________________________________ discuss mailing list discuss(a)mpich.org<mailto:[email protected]> To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss ________________________________ This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email._______________________________________________ discuss mailing list discuss(a)mpich.org<mailto:[email protected]> To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Problem installing MPICH
by Sahar Amir 05 Aug '14

05 Aug '14

I don't think I made any modification I only removed the FORTRAN option like this: ./configure --prefix=/Data_1/MPICH/MPICHsoftware --disable-fortran | tee c.log On Tue, Aug 5, 2014 at 1:09 PM, Bland, Wesley B. <wbland(a)anl.gov> wrote: > Are you making modifications to the autoconf files? If so, you’ll need to > re-run autogen.sh and make sure that you have all of the autotools > installed correctly (as per the wiki page: > http://wiki.mpich.org/mpich/index.php/Getting_And_Building_MPICH#Setting_up…) > > > On Aug 5, 2014, at 1:04 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa> wrote: > > > Dear Wesley, > > Attached is my .log file ... > I need to do it this way for further modification I will be testing in a > workshop I am attending right now ... > > Will you help me fix it please ... > > Thank you very much ... <330.gif> ... > > Regards, > Sahar > > > > On Tue, Aug 5, 2014 at 10:23 AM, Bland, Wesley B. <wbland(a)anl.gov> wrote: > >> This looks like you might not have run the configure script correctly >> before running make. Can you send your config.log? >> >> Also, is there a particular reason that you need to install MPICH from >> source. It’s usually easier to just grab one of the versions that installs >> automatically. For Mac’s the recommended way of doing this is to use >> Homebrew. You can find more information on the Downloads page. For most >> installations (unless you’re using some non-default features), this is >> sufficient. >> >> Thanks, >> Wesley >> >> On Aug 5, 2014, at 10:17 AM, Sahar Amir <sahar.amir(a)kaust.edu.sa> >> wrote: >> >> >> Good morning, >> >> I am trying to install MPICH on my mac. however when I try to apply the >> instruction make 2>&1 | tee m.log >> >> It gives: >> CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh >> /Data_1/mpich-3.1.2/confdb/missing aclocal-1.14 -I confdb >> /Data_1/mpich-3.1.2/confdb/missing: line 81: aclocal-1.14: command not >> found >> WARNING: 'aclocal-1.14' is missing on your system. >> You should only need it if you modified 'acinclude.m4' or >> 'configure.ac' or m4 files included by 'configure.ac'. >> The 'aclocal' program is part of the GNU Automake package: >> <http://www.gnu.org/software/automake> >> It also requires GNU Autoconf, GNU m4 and Perl in order to run: >> <http://www.gnu.org/software/autoconf> >> <http://www.gnu.org/software/m4/> >> <http://www.perl.org/> >> make: *** [aclocal.m4] Error 127 >> >> >> Regards, >> Sahar >> >> ------------------------------ >> This message and its contents, including attachments are intended >> solely for the original recipient. If you are not the intended recipient or >> have received this message in error, please notify me immediately and >> delete this message from your computer system. Any unauthorized use or >> distribution is prohibited. Please consider the environment before printing >> this email._______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> > > > ------------------------------ > This message and its contents, including attachments are intended solely > for the original recipient. If you are not the intended recipient or have > received this message in error, please notify me immediately and delete > this message from your computer system. Any unauthorized use or > distribution is prohibited. Please consider the environment before printing > this email.<config.log>_______________________________________________ > > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > -- ------------------------------ This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email.

1 0

Re: [mpich-discuss] Problem installing MPICH
by Bland, Wesley B. 05 Aug '14

05 Aug '14

Are you making modifications to the autoconf files? If so, you’ll need to re-run autogen.sh and make sure that you have all of the autotools installed correctly (as per the wiki page: http://wiki.mpich.org/mpich/index.php/Getting_And_Building_MPICH#Setting_up…) On Aug 5, 2014, at 1:04 PM, Sahar Amir <sahar.amir(a)kaust.edu.sa<mailto:[email protected]>> wrote: Dear Wesley, Attached is my .log file ... I need to do it this way for further modification I will be testing in a workshop I am attending right now ... Will you help me fix it please ... Thank you very much ... <330.gif> ... Regards, Sahar On Tue, Aug 5, 2014 at 10:23 AM, Bland, Wesley B. <wbland(a)anl.gov<mailto:[email protected]>> wrote: This looks like you might not have run the configure script correctly before running make. Can you send your config.log? Also, is there a particular reason that you need to install MPICH from source. It’s usually easier to just grab one of the versions that installs automatically. For Mac’s the recommended way of doing this is to use Homebrew. You can find more information on the Downloads page. For most installations (unless you’re using some non-default features), this is sufficient. Thanks, Wesley On Aug 5, 2014, at 10:17 AM, Sahar Amir <sahar.amir(a)kaust.edu.sa<mailto:[email protected]>> wrote: Good morning, I am trying to install MPICH on my mac. however when I try to apply the instruction make 2>&1 | tee m.log It gives: CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /Data_1/mpich-3.1.2/confdb/missing aclocal-1.14 -I confdb /Data_1/mpich-3.1.2/confdb/missing: line 81: aclocal-1.14: command not found WARNING: 'aclocal-1.14' is missing on your system. You should only need it if you modified 'acinclude.m4' or 'configure.ac<http://configure.ac/>' or m4 files included by 'configure.ac<http://configure.ac/>'. The 'aclocal' program is part of the GNU Automake package: <http://www.gnu.org/software/automake> It also requires GNU Autoconf, GNU m4 and Perl in order to run: <http://www.gnu.org/software/autoconf> <http://www.gnu.org/software/m4/> <http://www.perl.org/> make: *** [aclocal.m4] Error 127 Regards, Sahar ________________________________ This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email._______________________________________________ discuss mailing list discuss(a)mpich.org<mailto:[email protected]> To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss _______________________________________________ discuss mailing list discuss(a)mpich.org<mailto:[email protected]> To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss ________________________________ This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email.<config.log>_______________________________________________ discuss mailing list discuss(a)mpich.org<mailto:[email protected]> To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0