October 2013 - discuss - mailman3.cels.anl.gov

how to make mpich crash hard so I can gdb bt it?
by Jeff Hammond 11 Oct '13

11 Oct '13

I apologize if this is a stupid question, but I would like MPICH to crash and burn rather than terminate gently when an error occurs so that I can gdb bt it to know where the error is in my program, since I am absolutely certain that this error is in the application and not MPICH. Ideally, I would be able to select the failure mode at runtime, e.g. MPICH_FAILURE_MODE={hard,soft}, so that I can get either the nice MPICH trace when I think MPICH is the problem and a brutal light-the-machine-room-on-fire-and-abort-the-universe error when I think it's my fault. Thanks, Jeff <running in gdb> Assertion failed in file ../src/mpi/coll/helper_fns.c at line 81: FALSE memcpy argument memory ranges overlap, dst_=0x101401000 src_=0x101401000 len_=400 internal ABORT - process 0 Fatal error in MPI_Win_free: Other MPI error, error stack: MPI_Win_free(134)..........: MPI_Win_free(win=0x10000b394) failed MPIDI_CH3_SHM_Win_free(103): pthread mutex routine failed (Resource busy) Program exited with code 01. (gdb) bt $ mpichversion MPICH Version: 3.1b2 MPICH Release date: unreleased development copy MPICH Device: ch3:nemesis MPICH configure: CC=clang CXX=clang++ FC=/bin/false --disable-fc --disable-f77 --enable-threads --enable-g --with-pm=hydra --prefix=/opt/mpich/dev/clang MPICH CC: clang -g -O2 MPICH CXX: clang++ -g -O2 MPICH F77: no -g MPICH FC: no -g -- Jeff Hammond jeff.science(a)gmail.com

1 0

Re: [mpich-discuss] urgent help required
by Ricardo Román Brenes 07 Oct '13

07 Oct '13

you might need some of the "development tools" package group. Check the config.log for more errors or dmesg. On Mon, Oct 7, 2013 at 1:37 PM, Sayyam Sachdeva < sayyamsachdeva_22(a)yahoo.co.in> wrote: > > Hello Sir > > while running the command ./configure I am obtaining the following output. > You'll find the screenshots attached with this mail > I have installed gfortran and gcc before running the above command > > Hoping for an early response. > > Warm Regards > > Sayyam Sachdev > > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss >

1 0

urgent help required
by Sayyam Sachdeva 07 Oct '13

07 Oct '13

Hello Sir while running the command ./configure I am obtaining the following output. You'll find the screenshots attached with this mail I have installed gfortran and gcc before running the above command Hoping for an early response. Warm Regards Sayyam Sachdev

1 0

(no subject)
by Sayyam Sachdeva 07 Oct '13

07 Oct '13

Hello Sir while running the command ./configure I am obtaining the following output. You'll find the screenshots attached with this mail I have installed gfortran and gcc before running the above command Hoping for an early response. Warm Regards Sayyam Sachdev

1 0

Re: [mpich-discuss] MPICH + DMTCP for checkpoint restart
by Pavan Balaji 05 Oct '13

05 Oct '13

It's not supported in MPICH. Sorry. -- Pavan On Oct 5, 2013, at 11:02 AM, basma a.azeem wrote: > i need to use DMTCP to checkpoint and restart MPICH program > > > which version of MPICH is working fine with Dmtcp?if any > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss -- Pavan Balaji http://www.mcs.anl.gov/~balaji

1 0

MPICH + DMTCP for checkpoint restart
by basma a.azeem 05 Oct '13

05 Oct '13

i need to use DMTCP to checkpoint and restart MPICH program which version of MPICH is working fine with Dmtcp?if any

1 0

Re: [mpich-discuss] windows install fail
by Arnaud Ritou 04 Oct '13

04 Oct '13

Damn! Thank you Antonio. Arnaud ----- Message de apenya(a)mcs.anl.gov --------- Dateï¿½: Fri, 04 Oct 2013 09:27 -0500 Deï¿½: "Antonio J. Peï¿½a" <apenya(a)mcs.anl.gov> Rï¿½pondre ï¿½: discuss(a)mpich.org Objetï¿½: Re: [mpich-discuss] windows install fail ï¿½ï¿½: discuss(a)mpich.org > > Sorry, we no longer support Windows: > > http://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_can… > > Antonio > > > On Friday, October 04, 2013 04:19:52 PM Arnaud Ritou wrote: >> Hello, >> >> I do not understand how to solve my issue alone so I write to you. >> I try to install the 1.4.1p1 version of MPI on Windows 7 in 64bits but >> it fails during the source distribution step. >> The .msi and smpd.exe are running but the use of mpich2.sln is issuing. >> >> When I open mpich2.sln with Visual Studio 2010 express, it must >> convert files to run in the 2010 version. >> This operation resulted but there are many warnings (the sum up is >> called UpgradeLog.XML in the attachment) and some projetcs are not >> available (mpich2ff, MPICH2Installer, MPICH2x64Installer, mpif90, >> wmpiconfig, mpiexec and wmpiregister). >> After that, i try to build ch3sockRelease solution in mpich2 but it >> fails. Visual studio assistant note that several projects are obsolete >> (mpi - Release Win32, smpd_util - Relesae Win32, dbg -ch3sockRelease >> Win32, rlog -Release Win 32, pmi - Release Win32, executive - Release >> Win32, mpl - Release Win32, ch3nemesis - Release Win32, mpich2 - >> ch3sockRelease Win32). >> >> Could you help me? I don't understand what is going wrong... >> >> Thank you for your help. >> Good bye. > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > ----- Fin du message de apenya(a)mcs.anl.gov -----

1 0

Re: [mpich-discuss] windows install fail
by Antonio J. Peña 04 Oct '13

04 Oct '13

Sorry, we no longer support Windows: http://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_can… Antonio On Friday, October 04, 2013 04:19:52 PM Arnaud Ritou wrote: > Hello, > > I do not understand how to solve my issue alone so I write to you. > I try to install the 1.4.1p1 version of MPI on Windows 7 in 64bits but > it fails during the source distribution step. > The .msi and smpd.exe are running but the use of mpich2.sln is issuing. > > When I open mpich2.sln with Visual Studio 2010 express, it must > convert files to run in the 2010 version. > This operation resulted but there are many warnings (the sum up is > called UpgradeLog.XML in the attachment) and some projetcs are not > available (mpich2ff, MPICH2Installer, MPICH2x64Installer, mpif90, > wmpiconfig, mpiexec and wmpiregister). > After that, i try to build ch3sockRelease solution in mpich2 but it > fails. Visual studio assistant note that several projects are obsolete > (mpi - Release Win32, smpd_util - Relesae Win32, dbg -ch3sockRelease > Win32, rlog -Release Win 32, pmi - Release Win32, executive - Release > Win32, mpl - Release Win32, ch3nemesis - Release Win32, mpich2 - > ch3sockRelease Win32). > > Could you help me? I don't understand what is going wrong... > > Thank you for your help. > Good bye.

1 0

windows install fail
by Arnaud Ritou 04 Oct '13

04 Oct '13

Hello, I do not understand how to solve my issue alone so I write to you. I try to install the 1.4.1p1 version of MPI on Windows 7 in 64bits but it fails during the source distribution step. The .msi and smpd.exe are running but the use of mpich2.sln is issuing. When I open mpich2.sln with Visual Studio 2010 express, it must convert files to run in the 2010 version. This operation resulted but there are many warnings (the sum up is called UpgradeLog.XML in the attachment) and some projetcs are not available (mpich2ff, MPICH2Installer, MPICH2x64Installer, mpif90, wmpiconfig, mpiexec and wmpiregister). After that, i try to build ch3sockRelease solution in mpich2 but it fails. Visual studio assistant note that several projects are obsolete (mpi - Release Win32, smpd_util - Relesae Win32, dbg -ch3sockRelease Win32, rlog -Release Win 32, pmi - Release Win32, executive - Release Win32, mpl - Release Win32, ch3nemesis - Release Win32, mpich2 - ch3sockRelease Win32). Could you help me? I don't understand what is going wrong... Thank you for your help. Good bye.

1 0

Re: [mpich-discuss] Problem with MPICH2
by Pavan Balaji 03 Oct '13

03 Oct '13

This is not enough information. Everything that has [proxy:0..] or [mpiexec@…] is internal cleanup code, and is useless for debugging what actually went wrong. -- Pavan On Oct 3, 2013, at 3:53 AM, Nitel Muhtaroglu wrote: > Hi, > > I am trying to solve a linear system of equations on a 4xIBM HS22 Blade setup (24GB+two 4 cores Intel Xeon). > I am facing the following error during my computation, does anyone know what the problem is? > > ------------------------------------------------------------------------------------------------------------- > INTERNAL ERROR: Invalid error class (71) encountered while returning from > MPI_Recv. Please file a bug report. > [proxy:0:[email protected]] HYD_pmcd_pmip_control_cmd_cb (./pm/pmiserv/pmip_cb. c:928): assert (!closed) failed > [proxy:0:[email protected]] HYDT_dmxu_poll_wait_for_event (./tools/demux/demux_ poll.c:77): callback returned error status > [proxy:0:[email protected]] main (./pm/pmiserv/pmip.c:226): demux engine error waiting for event > [proxy:0:[email protected]] HYD_pmcd_pmip_control_cmd_cb (./pm/pmiserv/pmip_cb. c:928): assert (!closed) failed > [proxy:0:[email protected]] HYDT_dmxu_poll_wait_for_event (./tools/demux/demux_ poll.c:77): callback returned error status > [proxy:0:[email protected]] main (./pm/pmiserv/pmip.c:226): demux engine error waiting for event > [mpiexec(a)ibm-bl01.ozun.int] HYDT_bscu_wait_for_completion (./tools/bootstrap/util s/bscu_wait.c:70): one of the processes terminated badly; aborting > [mpiexec(a)ibm-bl01.ozun.int] HYDT_bsci_wait_for_completion (./tools/bootstrap/src/ bsci_wait.c:23): launcher returned error waiting for completion > [mpiexec(a)ibm-bl01.ozun.int] HYD_pmci_wait_for_completion (./pm/pmiserv/pmiserv_pm ci.c:191): launcher returned error waiting for completion > [mpiexec(a)ibm-bl01.ozun.int] main (./ui/mpich/mpiexec.c:405): process manager erro r waiting for completion > ------------------------------------------------------------------------------------------------------------- > > Regards, > -- > Nitel > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss -- Pavan Balaji http://www.mcs.anl.gov/~balaji

1 0