February 2014 - discuss - mailman3.cels.anl.gov

Re: [mpich-discuss] VA_ARGS support
by James Long 26 Feb '14

26 Feb '14

You're right, taking out "-V" solves the problem! "-V" gives the version; due to the number of machines managed, it is an old habit to include it so there is a record of what version was used, and/or know if updates are needed: $ pgcc -V pgcc 14.2-0 64-bit target on x86-64 Linux -tp istanbul The Portland Group - PGI Compilers and Tools Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. Thanks, Jim On Feb 25, 2014, at 5:26 PM, Balaji, Pavan wrote: > > Never mind, I found the problem. > > MPICH checks to make sure the compiler doesn’t spit warnings during its configure checks. With your flags settings, it is dumping unnecessary output which MPICH is treating as warnings and is therefore disabling VA_ARGS. > > This should fail with mpich-3.0.x as well, but maybe we added additional checks after that. > > Why do you want to use the -V flags? > > — Pavan > > On Feb 25, 2014, at 7:04 PM, James Long <jlong(a)iarc.uaf.edu> wrote: > >> $ pgcc foo.c >> $ ./a.out >> foo >> $ >> >> On Feb 25, 2014, at 3:51 PM, Balaji, Pavan wrote: >> >>> >>> Thanks. Can you try compiling the below program with your pgi compiler: >>> >>> #include <stdio.h> >>> #define conftest_va_arg_macro(...) printf(__VA_ARGS__) >>> >>> int main() >>> { >>> conftest_va_arg_macro("foo\n"); >>> return 0; >>> } >>> >>> Thanks, >>> >>> — Pavan >>> >>> On Feb 25, 2014, at 5:23 PM, James Long <jlong(a)iarc.uaf.edu> wrote: >>> >>>> hydra_config.h: >>>> >>>> http://pastebin.com/SMZhvP1j >>>> >>>> On Feb 25, 2014, at 2:13 PM, Balaji, Pavan wrote: >>>> >>>>> >>>>> This is weird. Configure detected VA_ARGS correctly: >>>>> >>>>> configure:13475: checking for variable argument list macro functionality >>>>> configure:13520: pgcc -o conftest -O2 -V -O2 -DNDEBUG -DpgiFortran >>>>> -I/home/boss/mpich-3.1/src/mpl/include >>>>> -I/home/boss/mpich-3.1/src/mpl/include >>>>> -I/home/boss/mpich-3.1/src/openpa/src >>>>> -I/home/boss/mpich-3.1/src/openpa/src >>>>> -I/home/boss/mpich-3.1/src/mpi/romio/include conftest.c > pac_test.log >>>>> 2>&1 >>>>> configure:13520: $? = 0 >>>>> >>>>> >>>>> Can you send us your src/pm/hydra/include/hydra_config.h file? >>>>> >>>>> — Pavan >>>>> >>>>> On 2/25/14, 3:43 PM, "James Long" <jlong(a)iarc.uaf.edu> wrote: >>>>> >>>>>> In two parts: >>>>>> >>>>>> http://pastebin.com/zip0pYB5 >>>>>> http://pastebin.com/qj0xNh7s >>>>>> >>>>>> On Feb 25, 2014, at 11:27 AM, Balaji, Pavan wrote: >>>>>> >>>>>>> >>>>>>> Is there a compiler that actually does not support VA_ARGS in 2014? >>>>>>> >>>>>>> You’ll need to send us the config.log in src/pm/hydra. >>>>>>> >>>>>>> — Pavan >>>>>>> >>>>>>> On 2/25/14, 2:06 PM, "James Long" <jlong(a)iarc.uaf.edu> wrote: >>>>>>> >>>>>>>> Under debian 7.4, trying to compile mpich-3.1 with Portland Group 13.6, >>>>>>>> or 14.2, same error results in both cases: >>>>>>>> >>>>>>>> make[3]: Entering directory `/home/user/mpich-3.1/src/pm/hydra' >>>>>>>> CC utils/alloc/alloc.lo >>>>>>>> PGC/x86-64 Linux 13.6-0 >>>>>>>> Copyright 1989-2000, The Portland Group, Inc. All Rights Reserved. >>>>>>>> Copyright 2000-2013, STMicroelectronics, Inc. All Rights Reserved. >>>>>>>> PGC-F-0249-#error -- "hydra requires VA_ARGS >>>>>>>> support" (./include/hydra.h: 79) >>>>>>>> PGC/x86-64 Linux 13.6-0: compilation aborted >>>>>>>> >>>>>>>> >>>>>>>> environment variables used: >>>>>>>> $ unset F90 >>>>>>>> $ export CC=pgcc >>>>>>>> $ export FC=pgf90 >>>>>>>> $ export CXX=pgCC >>>>>>>> $ export CPPFLAGS="-DNDEBUG -DpgiFortran" >>>>>>>> $ export CFLAGS="-O2 -V" >>>>>>>> $ export FFLAGS="-O2 -w -V" >>>>>>>> >>>>>>>> Thanks, >>>>>>>> >>>>>>>> Jim >>>>>>>> -- >>>>>>>> >>>>>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>>>>> James Long >>>>>>>> International Arctic Research Center >>>>>>>> University of Alaska Fairbanks >>>>>>>> jlong|at|alaska.edu >>>>>>>> (907) 474-2440 >>>>>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> discuss mailing list discuss(a)mpich.org >>>>>>>> To manage subscription options or unsubscribe: >>>>>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>>>>> >>>>>>> _______________________________________________ >>>>>>> discuss mailing list discuss(a)mpich.org >>>>>>> To manage subscription options or unsubscribe: >>>>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>>>> >>>>>> -- >>>>>> >>>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>>> James Long >>>>>> International Arctic Research Center >>>>>> University of Alaska Fairbanks >>>>>> jlong|at|alaska.edu >>>>>> (907) 474-2440 >>>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> discuss mailing list discuss(a)mpich.org >>>>>> To manage subscription options or unsubscribe: >>>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>>> >>>>> _______________________________________________ >>>>> discuss mailing list discuss(a)mpich.org >>>>> To manage subscription options or unsubscribe: >>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>> >>>> -- >>>> >>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>> James Long >>>> International Arctic Research Center >>>> University of Alaska Fairbanks >>>> jlong|at|alaska.edu >>>> (907) 474-2440 >>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> discuss mailing list discuss(a)mpich.org >>>> To manage subscription options or unsubscribe: >>>> https://lists.mpich.org/mailman/listinfo/discuss >>> >>> _______________________________________________ >>> discuss mailing list discuss(a)mpich.org >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/discuss >> >> -- >> >> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >> James Long >> International Arctic Research Center >> University of Alaska Fairbanks >> jlong|at|alaska.edu >> (907) 474-2440 >> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >> >> >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss -- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% James Long International Arctic Research Center University of Alaska Fairbanks jlong|at|alaska.edu (907) 474-2440 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

1 0

Compiling with -std=f2003 and mpif.h
by Jed Brown 26 Feb '14

26 Feb '14

I have a user that wants me to check their F2003 code which uses mpif.h. Attempting to compile with gfortran-4.8.2 -std=f2003 results in errors coming from mpif.h. I tried configuring MPICH (v3.1-16-g38a5e61) using FCFLAGS=-std=f2003, but I get build errors. GFortran does not have a -std=gnu2003, so it appears that GNU extensions and F2003+ features are mutually exclusive. What is MPICH's intent here? mpifnoext.h:16.18: Included at src/binding/f90/mpi_constants.f90:6: CHARACTER*1 MPI_ARGVS_NULL(1,1) 1 Warning: Obsolescent feature: Old-style character length at (1) mpifnoext.h:17.18: Included at src/binding/f90/mpi_constants.f90:6: CHARACTER*1 MPI_ARGV_NULL(1) 1 Warning: Obsolescent feature: Old-style character length at (1) mpifnoext.h:528.16: Included at src/binding/f90/mpi_constants.f90:6: integer*8 MPI_DISPLACEMENT_CURRENT 1 Error: GNU Extension: Nonstandard type declaration INTEGER*8 at (1) mpifnoext.h:529.42: Included at src/binding/f90/mpi_constants.f90:6: PARAMETER (MPI_DISPLACEMENT_CURRENT=-54278278) 1 Error: Symbol 'mpi_displacement_current' at (1) has no IMPLICIT type

1 0

Re: [mpich-discuss] Error "hydra requires VA_ARGS support", RHEL 5.10, icc
by Balaji, Pavan 26 Feb '14

26 Feb '14

Note for MPICH developers: It’ll be good to figure out what exactly changed between 3.0.4 and 3.1 that is causing this. My understanding is that this check for warnings has been there in MPICH for a long time. — Pavan On Feb 26, 2014, at 9:18 AM, Lu, Huiwei <huiweilu(a)mcs.anl.gov> wrote: > This problem seems to be similar as the discussion thread below: > http://lists.mpich.org/pipermail/discuss/2014-February/002246.html > Some of your flags was treated as warnings by MPICH and therefore disabled VA_ARGS. > > Could you please try to compile MPICH-3.1 with less flags? For example, > export CFLAGS=‘-O3’ > export CXXFLAGS=‘-O3’ > export FFLAGS=‘-O3’ > > — > Huiwei Lu > Postdoc Appointee > Mathematics and Computer Science Division, Argonne National Laboratory > http://www.mcs.anl.gov/~huiweilu/ > > On Feb 26, 2014, at 5:42 AM, Бакиров, Медер <bakirov(a)almetico.com> wrote: > >> Dear Sirs! >> >> I'm trying to compile MPICH 3.1 under RHEL 5.10 using Intel Compiler, >> but encounter the following errors: >> >> make[3]: Entering directory `/home/dotcoder/src/mpich-3.1/src/pm/hydra' >> CC utils/alloc/alloc.lo >> In file included from utils/alloc/alloc.c(7): >> ./include/hydra.h(79): catastrophic error: #error directive: "hydra >> requires VA_ARGS support" >> #error "hydra requires VA_ARGS support" >> ^ >> >> compilation aborted for utils/alloc/alloc.c (code 4) >> make[3]: *** [utils/alloc/alloc.lo] Error 1 >> make[3]: Leaving directory `/home/dotcoder/src/mpich-3.1/src/pm/hydra' >> make[2]: *** [all-recursive] Error 1 >> make[2]: Leaving directory `/home/dotcoder/src/mpich-3.1/src/pm/hydra' >> make[1]: *** [all-recursive] Error 1 >> make[1]: Leaving directory `/home/dotcoder/src/mpich-3.1' >> make: *** [all] Error 2 >> >> Can you, please, help me to figure out an error and successfully >> compile MPICH 3.1? >> >> I'm using icc version 14.0.2. My environment variables: >> export CC=icc >> export CXX=icpc >> export CFLAGS='-O3 -xHost -ip -no-prec-div -static-intel' >> export CXXFLAGS='-O3 -xHost -ip -no-prec-div -static-intel' >> export F77=ifort >> export FC=ifort >> export FFLAGS='-O3 -xHost -ip -no-prec-div -static-intel' >> export CPP='icc -E' >> export CXXCPP='icpc -E' >> unset F90 >> >> Please, find an attachment with the corresponding gzipped config.log file. >> >> Thanks! >> >> Best regards, >> Meder Bakirov >> <config.log.gz>_______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] MPICH2-1.4 hangs on XP
by Lu, Huiwei 26 Feb '14

26 Feb '14

Hi Kari, Due to lack of developer resources, MPICH no longer supports the Windows platform. Please refer to our FAQ for more information: http://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_can… We recommend you use Microsoft MPI, which can be found here: http://msdn.microsoft.com/en-us/library/bb524831(v=vs.85).aspx — Huiwei Lu Postdoc Appointee Mathematics and Computer Science Division, Argonne National Laboratory http://www.mcs.anl.gov/~huiweilu/ On Feb 26, 2014, at 2:30 AM, Karl Broich <karl_broich(a)t-online.de> wrote: > Hello, > > I am trying to run dynamic process mangement using MPI4PY. > > For first studies I used on Windows XP (dont laugh:-) : > - MPICH 1.4.1-p 32bit > - Mingw Gnu Fortran compiler with link libary libfmpich2g.a > - python 2.6 with MPI4PY > - test cases 1 : mandelbrot-master.py + mandelbrot-worker.f90 (I had to replace "use mpi" with "mpif.h".) > - test case 2 : master.py + pi.py > > I can run both testcases without errors or warnings, but the processes hang. If I interupt, the following output is given. (Note: test without dynamic process mangement work well.) > > I first assumed, that there is a problem with spawning/releasing the processes from MPI4PY. But then Mr. Dalcin advised me to write a fortran master for test case 1. I did this and noticed the same behaviour. Therefore it is obviously a problem with MPICH2-installation. > > Is this a known problem? > If yes, is there a solution? > > Thank you very much in advance. > Karl > > > > <pi-master_problem.jpg><mandelbrot-master_problem.jpg>_______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Error "hydra requires VA_ARGS support", RHEL 5.10, icc
by Lu, Huiwei 26 Feb '14

26 Feb '14

This problem seems to be similar as the discussion thread below: http://lists.mpich.org/pipermail/discuss/2014-February/002246.html Some of your flags was treated as warnings by MPICH and therefore disabled VA_ARGS. Could you please try to compile MPICH-3.1 with less flags? For example, export CFLAGS=‘-O3’ export CXXFLAGS=‘-O3’ export FFLAGS=‘-O3’ — Huiwei Lu Postdoc Appointee Mathematics and Computer Science Division, Argonne National Laboratory http://www.mcs.anl.gov/~huiweilu/ On Feb 26, 2014, at 5:42 AM, Бакиров, Медер <bakirov(a)almetico.com> wrote: > Dear Sirs! > > I'm trying to compile MPICH 3.1 under RHEL 5.10 using Intel Compiler, > but encounter the following errors: > > make[3]: Entering directory `/home/dotcoder/src/mpich-3.1/src/pm/hydra' > CC utils/alloc/alloc.lo > In file included from utils/alloc/alloc.c(7): > ./include/hydra.h(79): catastrophic error: #error directive: "hydra > requires VA_ARGS support" > #error "hydra requires VA_ARGS support" > ^ > > compilation aborted for utils/alloc/alloc.c (code 4) > make[3]: *** [utils/alloc/alloc.lo] Error 1 > make[3]: Leaving directory `/home/dotcoder/src/mpich-3.1/src/pm/hydra' > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory `/home/dotcoder/src/mpich-3.1/src/pm/hydra' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/home/dotcoder/src/mpich-3.1' > make: *** [all] Error 2 > > Can you, please, help me to figure out an error and successfully > compile MPICH 3.1? > > I'm using icc version 14.0.2. My environment variables: > export CC=icc > export CXX=icpc > export CFLAGS='-O3 -xHost -ip -no-prec-div -static-intel' > export CXXFLAGS='-O3 -xHost -ip -no-prec-div -static-intel' > export F77=ifort > export FC=ifort > export FFLAGS='-O3 -xHost -ip -no-prec-div -static-intel' > export CPP='icc -E' > export CXXCPP='icpc -E' > unset F90 > > Please, find an attachment with the corresponding gzipped config.log file. > > Thanks! > > Best regards, > Meder Bakirov > <config.log.gz>_______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0

Error "hydra requires VA_ARGS support", RHEL 5.10, icc
by Бакиров, Медер 26 Feb '14

26 Feb '14

Dear Sirs! I'm trying to compile MPICH 3.1 under RHEL 5.10 using Intel Compiler, but encounter the following errors: make[3]: Entering directory `/home/dotcoder/src/mpich-3.1/src/pm/hydra' CC utils/alloc/alloc.lo In file included from utils/alloc/alloc.c(7): ./include/hydra.h(79): catastrophic error: #error directive: "hydra requires VA_ARGS support" #error "hydra requires VA_ARGS support" ^ compilation aborted for utils/alloc/alloc.c (code 4) make[3]: *** [utils/alloc/alloc.lo] Error 1 make[3]: Leaving directory `/home/dotcoder/src/mpich-3.1/src/pm/hydra' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/dotcoder/src/mpich-3.1/src/pm/hydra' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/dotcoder/src/mpich-3.1' make: *** [all] Error 2 Can you, please, help me to figure out an error and successfully compile MPICH 3.1? I'm using icc version 14.0.2. My environment variables: export CC=icc export CXX=icpc export CFLAGS='-O3 -xHost -ip -no-prec-div -static-intel' export CXXFLAGS='-O3 -xHost -ip -no-prec-div -static-intel' export F77=ifort export FC=ifort export FFLAGS='-O3 -xHost -ip -no-prec-div -static-intel' export CPP='icc -E' export CXXCPP='icpc -E' unset F90 Please, find an attachment with the corresponding gzipped config.log file. Thanks! Best regards, Meder Bakirov

1 0

MPICH2-1.4 hangs on XP
by Karl Broich 26 Feb '14

26 Feb '14

Hello, I am trying to run dynamic process mangement using MPI4PY. For first studies I used on Windows XP (dont laugh:-) : - MPICH 1.4.1-p 32bit - Mingw Gnu Fortran compiler with link libary libfmpich2g.a - python 2.6 with MPI4PY - test cases 1 : mandelbrot-master.py + mandelbrot-worker.f90 (I had to replace "use mpi" with "mpif.h".) - test case 2 : master.py + pi.py I can run both testcases without errors or warnings, but the processes hang. If I interupt, the following output is given. (Note: test without dynamic process mangement work well.) I first assumed, that there is a problem with spawning/releasing the processes from MPI4PY. But then Mr. Dalcin advised me to write a fortran master for test case 1. I did this and noticed the same behaviour. Therefore it is obviously a problem with MPICH2-installation. Is this a known problem? If yes, is there a solution? Thank you very much in advance. Karl

1 0

Re: [mpich-discuss] VA_ARGS support
by Balaji, Pavan 25 Feb '14

25 Feb '14

Never mind, I found the problem. MPICH checks to make sure the compiler doesn’t spit warnings during its configure checks. With your flags settings, it is dumping unnecessary output which MPICH is treating as warnings and is therefore disabling VA_ARGS. This should fail with mpich-3.0.x as well, but maybe we added additional checks after that. Why do you want to use the -V flags? — Pavan On Feb 25, 2014, at 7:04 PM, James Long <jlong(a)iarc.uaf.edu> wrote: > $ pgcc foo.c > $ ./a.out > foo > $ > > On Feb 25, 2014, at 3:51 PM, Balaji, Pavan wrote: > >> >> Thanks. Can you try compiling the below program with your pgi compiler: >> >> #include <stdio.h> >> #define conftest_va_arg_macro(...) printf(__VA_ARGS__) >> >> int main() >> { >> conftest_va_arg_macro("foo\n"); >> return 0; >> } >> >> Thanks, >> >> — Pavan >> >> On Feb 25, 2014, at 5:23 PM, James Long <jlong(a)iarc.uaf.edu> wrote: >> >>> hydra_config.h: >>> >>> http://pastebin.com/SMZhvP1j >>> >>> On Feb 25, 2014, at 2:13 PM, Balaji, Pavan wrote: >>> >>>> >>>> This is weird. Configure detected VA_ARGS correctly: >>>> >>>> configure:13475: checking for variable argument list macro functionality >>>> configure:13520: pgcc -o conftest -O2 -V -O2 -DNDEBUG -DpgiFortran >>>> -I/home/boss/mpich-3.1/src/mpl/include >>>> -I/home/boss/mpich-3.1/src/mpl/include >>>> -I/home/boss/mpich-3.1/src/openpa/src >>>> -I/home/boss/mpich-3.1/src/openpa/src >>>> -I/home/boss/mpich-3.1/src/mpi/romio/include conftest.c > pac_test.log >>>> 2>&1 >>>> configure:13520: $? = 0 >>>> >>>> >>>> Can you send us your src/pm/hydra/include/hydra_config.h file? >>>> >>>> — Pavan >>>> >>>> On 2/25/14, 3:43 PM, "James Long" <jlong(a)iarc.uaf.edu> wrote: >>>> >>>>> In two parts: >>>>> >>>>> http://pastebin.com/zip0pYB5 >>>>> http://pastebin.com/qj0xNh7s >>>>> >>>>> On Feb 25, 2014, at 11:27 AM, Balaji, Pavan wrote: >>>>> >>>>>> >>>>>> Is there a compiler that actually does not support VA_ARGS in 2014? >>>>>> >>>>>> You’ll need to send us the config.log in src/pm/hydra. >>>>>> >>>>>> — Pavan >>>>>> >>>>>> On 2/25/14, 2:06 PM, "James Long" <jlong(a)iarc.uaf.edu> wrote: >>>>>> >>>>>>> Under debian 7.4, trying to compile mpich-3.1 with Portland Group 13.6, >>>>>>> or 14.2, same error results in both cases: >>>>>>> >>>>>>> make[3]: Entering directory `/home/user/mpich-3.1/src/pm/hydra' >>>>>>> CC utils/alloc/alloc.lo >>>>>>> PGC/x86-64 Linux 13.6-0 >>>>>>> Copyright 1989-2000, The Portland Group, Inc. All Rights Reserved. >>>>>>> Copyright 2000-2013, STMicroelectronics, Inc. All Rights Reserved. >>>>>>> PGC-F-0249-#error -- "hydra requires VA_ARGS >>>>>>> support" (./include/hydra.h: 79) >>>>>>> PGC/x86-64 Linux 13.6-0: compilation aborted >>>>>>> >>>>>>> >>>>>>> environment variables used: >>>>>>> $ unset F90 >>>>>>> $ export CC=pgcc >>>>>>> $ export FC=pgf90 >>>>>>> $ export CXX=pgCC >>>>>>> $ export CPPFLAGS="-DNDEBUG -DpgiFortran" >>>>>>> $ export CFLAGS="-O2 -V" >>>>>>> $ export FFLAGS="-O2 -w -V" >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Jim >>>>>>> -- >>>>>>> >>>>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>>>> James Long >>>>>>> International Arctic Research Center >>>>>>> University of Alaska Fairbanks >>>>>>> jlong|at|alaska.edu >>>>>>> (907) 474-2440 >>>>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> discuss mailing list discuss(a)mpich.org >>>>>>> To manage subscription options or unsubscribe: >>>>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>>>> >>>>>> _______________________________________________ >>>>>> discuss mailing list discuss(a)mpich.org >>>>>> To manage subscription options or unsubscribe: >>>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>>> >>>>> -- >>>>> >>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>> James Long >>>>> International Arctic Research Center >>>>> University of Alaska Fairbanks >>>>> jlong|at|alaska.edu >>>>> (907) 474-2440 >>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> discuss mailing list discuss(a)mpich.org >>>>> To manage subscription options or unsubscribe: >>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>> >>>> _______________________________________________ >>>> discuss mailing list discuss(a)mpich.org >>>> To manage subscription options or unsubscribe: >>>> https://lists.mpich.org/mailman/listinfo/discuss >>> >>> -- >>> >>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>> James Long >>> International Arctic Research Center >>> University of Alaska Fairbanks >>> jlong|at|alaska.edu >>> (907) 474-2440 >>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>> >>> >>> >>> >>> _______________________________________________ >>> discuss mailing list discuss(a)mpich.org >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/discuss >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss > > -- > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% > James Long > International Arctic Research Center > University of Alaska Fairbanks > jlong|at|alaska.edu > (907) 474-2440 > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% > > > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] VA_ARGS support
by James Long 25 Feb '14

25 Feb '14

$ pgcc foo.c $ ./a.out foo $ On Feb 25, 2014, at 3:51 PM, Balaji, Pavan wrote: > > Thanks. Can you try compiling the below program with your pgi compiler: > > #include <stdio.h> > #define conftest_va_arg_macro(...) printf(__VA_ARGS__) > > int main() > { > conftest_va_arg_macro("foo\n"); > return 0; > } > > Thanks, > > — Pavan > > On Feb 25, 2014, at 5:23 PM, James Long <jlong(a)iarc.uaf.edu> wrote: > >> hydra_config.h: >> >> http://pastebin.com/SMZhvP1j >> >> On Feb 25, 2014, at 2:13 PM, Balaji, Pavan wrote: >> >>> >>> This is weird. Configure detected VA_ARGS correctly: >>> >>> configure:13475: checking for variable argument list macro functionality >>> configure:13520: pgcc -o conftest -O2 -V -O2 -DNDEBUG -DpgiFortran >>> -I/home/boss/mpich-3.1/src/mpl/include >>> -I/home/boss/mpich-3.1/src/mpl/include >>> -I/home/boss/mpich-3.1/src/openpa/src >>> -I/home/boss/mpich-3.1/src/openpa/src >>> -I/home/boss/mpich-3.1/src/mpi/romio/include conftest.c > pac_test.log >>> 2>&1 >>> configure:13520: $? = 0 >>> >>> >>> Can you send us your src/pm/hydra/include/hydra_config.h file? >>> >>> — Pavan >>> >>> On 2/25/14, 3:43 PM, "James Long" <jlong(a)iarc.uaf.edu> wrote: >>> >>>> In two parts: >>>> >>>> http://pastebin.com/zip0pYB5 >>>> http://pastebin.com/qj0xNh7s >>>> >>>> On Feb 25, 2014, at 11:27 AM, Balaji, Pavan wrote: >>>> >>>>> >>>>> Is there a compiler that actually does not support VA_ARGS in 2014? >>>>> >>>>> You’ll need to send us the config.log in src/pm/hydra. >>>>> >>>>> — Pavan >>>>> >>>>> On 2/25/14, 2:06 PM, "James Long" <jlong(a)iarc.uaf.edu> wrote: >>>>> >>>>>> Under debian 7.4, trying to compile mpich-3.1 with Portland Group 13.6, >>>>>> or 14.2, same error results in both cases: >>>>>> >>>>>> make[3]: Entering directory `/home/user/mpich-3.1/src/pm/hydra' >>>>>> CC utils/alloc/alloc.lo >>>>>> PGC/x86-64 Linux 13.6-0 >>>>>> Copyright 1989-2000, The Portland Group, Inc. All Rights Reserved. >>>>>> Copyright 2000-2013, STMicroelectronics, Inc. All Rights Reserved. >>>>>> PGC-F-0249-#error -- "hydra requires VA_ARGS >>>>>> support" (./include/hydra.h: 79) >>>>>> PGC/x86-64 Linux 13.6-0: compilation aborted >>>>>> >>>>>> >>>>>> environment variables used: >>>>>> $ unset F90 >>>>>> $ export CC=pgcc >>>>>> $ export FC=pgf90 >>>>>> $ export CXX=pgCC >>>>>> $ export CPPFLAGS="-DNDEBUG -DpgiFortran" >>>>>> $ export CFLAGS="-O2 -V" >>>>>> $ export FFLAGS="-O2 -w -V" >>>>>> >>>>>> Thanks, >>>>>> >>>>>> Jim >>>>>> -- >>>>>> >>>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>>> James Long >>>>>> International Arctic Research Center >>>>>> University of Alaska Fairbanks >>>>>> jlong|at|alaska.edu >>>>>> (907) 474-2440 >>>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> discuss mailing list discuss(a)mpich.org >>>>>> To manage subscription options or unsubscribe: >>>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>>> >>>>> _______________________________________________ >>>>> discuss mailing list discuss(a)mpich.org >>>>> To manage subscription options or unsubscribe: >>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>> >>>> -- >>>> >>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>> James Long >>>> International Arctic Research Center >>>> University of Alaska Fairbanks >>>> jlong|at|alaska.edu >>>> (907) 474-2440 >>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> discuss mailing list discuss(a)mpich.org >>>> To manage subscription options or unsubscribe: >>>> https://lists.mpich.org/mailman/listinfo/discuss >>> >>> _______________________________________________ >>> discuss mailing list discuss(a)mpich.org >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/discuss >> >> -- >> >> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >> James Long >> International Arctic Research Center >> University of Alaska Fairbanks >> jlong|at|alaska.edu >> (907) 474-2440 >> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >> >> >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss -- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% James Long International Arctic Research Center University of Alaska Fairbanks jlong|at|alaska.edu (907) 474-2440 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

1 0

Re: [mpich-discuss] VA_ARGS support
by Balaji, Pavan 25 Feb '14

25 Feb '14

Thanks. Can you try compiling the below program with your pgi compiler: #include <stdio.h> #define conftest_va_arg_macro(...) printf(__VA_ARGS__) int main() { conftest_va_arg_macro("foo\n"); return 0; } Thanks, — Pavan On Feb 25, 2014, at 5:23 PM, James Long <jlong(a)iarc.uaf.edu> wrote: > hydra_config.h: > > http://pastebin.com/SMZhvP1j > > On Feb 25, 2014, at 2:13 PM, Balaji, Pavan wrote: > >> >> This is weird. Configure detected VA_ARGS correctly: >> >> configure:13475: checking for variable argument list macro functionality >> configure:13520: pgcc -o conftest -O2 -V -O2 -DNDEBUG -DpgiFortran >> -I/home/boss/mpich-3.1/src/mpl/include >> -I/home/boss/mpich-3.1/src/mpl/include >> -I/home/boss/mpich-3.1/src/openpa/src >> -I/home/boss/mpich-3.1/src/openpa/src >> -I/home/boss/mpich-3.1/src/mpi/romio/include conftest.c > pac_test.log >> 2>&1 >> configure:13520: $? = 0 >> >> >> Can you send us your src/pm/hydra/include/hydra_config.h file? >> >> — Pavan >> >> On 2/25/14, 3:43 PM, "James Long" <jlong(a)iarc.uaf.edu> wrote: >> >>> In two parts: >>> >>> http://pastebin.com/zip0pYB5 >>> http://pastebin.com/qj0xNh7s >>> >>> On Feb 25, 2014, at 11:27 AM, Balaji, Pavan wrote: >>> >>>> >>>> Is there a compiler that actually does not support VA_ARGS in 2014? >>>> >>>> You’ll need to send us the config.log in src/pm/hydra. >>>> >>>> — Pavan >>>> >>>> On 2/25/14, 2:06 PM, "James Long" <jlong(a)iarc.uaf.edu> wrote: >>>> >>>>> Under debian 7.4, trying to compile mpich-3.1 with Portland Group 13.6, >>>>> or 14.2, same error results in both cases: >>>>> >>>>> make[3]: Entering directory `/home/user/mpich-3.1/src/pm/hydra' >>>>> CC utils/alloc/alloc.lo >>>>> PGC/x86-64 Linux 13.6-0 >>>>> Copyright 1989-2000, The Portland Group, Inc. All Rights Reserved. >>>>> Copyright 2000-2013, STMicroelectronics, Inc. All Rights Reserved. >>>>> PGC-F-0249-#error -- "hydra requires VA_ARGS >>>>> support" (./include/hydra.h: 79) >>>>> PGC/x86-64 Linux 13.6-0: compilation aborted >>>>> >>>>> >>>>> environment variables used: >>>>> $ unset F90 >>>>> $ export CC=pgcc >>>>> $ export FC=pgf90 >>>>> $ export CXX=pgCC >>>>> $ export CPPFLAGS="-DNDEBUG -DpgiFortran" >>>>> $ export CFLAGS="-O2 -V" >>>>> $ export FFLAGS="-O2 -w -V" >>>>> >>>>> Thanks, >>>>> >>>>> Jim >>>>> -- >>>>> >>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>> James Long >>>>> International Arctic Research Center >>>>> University of Alaska Fairbanks >>>>> jlong|at|alaska.edu >>>>> (907) 474-2440 >>>>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> discuss mailing list discuss(a)mpich.org >>>>> To manage subscription options or unsubscribe: >>>>> https://lists.mpich.org/mailman/listinfo/discuss >>>> >>>> _______________________________________________ >>>> discuss mailing list discuss(a)mpich.org >>>> To manage subscription options or unsubscribe: >>>> https://lists.mpich.org/mailman/listinfo/discuss >>> >>> -- >>> >>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>> James Long >>> International Arctic Research Center >>> University of Alaska Fairbanks >>> jlong|at|alaska.edu >>> (907) 474-2440 >>> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% >>> >>> >>> >>> >>> _______________________________________________ >>> discuss mailing list discuss(a)mpich.org >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/discuss >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss > > -- > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% > James Long > International Arctic Research Center > University of Alaska Fairbanks > jlong|at|alaska.edu > (907) 474-2440 > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% > > > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss

1 0