February 2016 - discuss - mailman3.cels.anl.gov

Re: [mpich-discuss] Error buildingmpich-master-v3.2-88-gbbb40df74d46
by Siegmar Gross 03 Feb '16

03 Feb '16

Hi Rob, today I tried to build mpich-master-v3.2-169-gff06d55a59a3 and got the same errors as before. Installing "libunwind-devel" solved the problem for gcc-5.2.0 but not for Sun C 5.13. Do you know, when your patches will be available in a nightly tarball? Kind regards Siegmar On 01/20/16 13:18, Siegmar Gross wrote: > Hi Rob, > > thank you very much for the second patch. Unfortunately it didn't > solve the problem completely. I looked around and found two more > files which needed your patches. After applying your patches I was > able to build the system with both compilers. I patched the following > files. > > loki bt 159 pwd > /export2/src/mpich-3.2.1/mpich-master-v3.2-88-gbbb40df74d46/src/pm/hydra/mpl/src/bt > loki bt 160 diff mpl_bt.c* > 47,51c47 > < /* we need not only the symbols but the header file too (for the cursor and > < * context), so tighten up when we take the libunwind path. Thanks > < * Siegmar.Gross(a)informatik.hs-fulda.de for the bug report about systems with > < * libunwind libraries but no libunwind development headers */ > < #elif defined MPL_HAVE_LIBUNWIND && defined(MPL_HAVE_LIBUNWIND_H) > --- > > #elif defined MPL_HAVE_LIBUNWIND > 125c121 > < #elif defined MPL_HAVE_LIBUNWIND && defined(MPL_HAVE_LIBUNWIND_H) > --- > > #elif defined MPL_HAVE_LIBUNWIND > loki bt 161 > loki bt 161 > loki bt 161 > loki bt 161 cd /export2/src/mpich-3.2.1/mpich-master-v3.2-88-gbbb40df74d46/src/mpi/romio/mpl/src/bt > loki bt 162 diff mpl_bt.c* 47,51c47 > < /* we need not only the symbols but the header file too (for the cursor and > < * context), so tighten up when we take the libunwind path. Thanks > < * Siegmar.Gross(a)informatik.hs-fulda.de for the bug report about systems with > < * libunwind libraries but no libunwind development headers */ > < #elif defined MPL_HAVE_LIBUNWIND && defined(MPL_HAVE_LIBUNWIND_H) > --- > > #elif defined MPL_HAVE_LIBUNWIND > 125c121 > < #elif defined MPL_HAVE_LIBUNWIND && defined(MPL_HAVE_LIBUNWIND_H) > --- > > #elif defined MPL_HAVE_LIBUNWIND > loki bt 163 > loki bt 163 > loki bt 163 > loki bt 163 cd /export2/src/mpich-3.2.1/mpich-master-v3.2-88-gbbb40df74d46/src/mpl/src/bt/ > loki bt 164 diff mpl_bt.c mpl_bt.c.orig > 47,51c47 > < /* we need not only the symbols but the header file too (for the cursor and > < * context), so tighten up when we take the libunwind path. Thanks > < * Siegmar.Gross(a)informatik.hs-fulda.de for the bug report about systems with > < * libunwind libraries but no libunwind development headers */ > < #elif defined MPL_HAVE_LIBUNWIND && defined(MPL_HAVE_LIBUNWIND_H) > --- > > #elif defined MPL_HAVE_LIBUNWIND > 125c121 > < #elif defined MPL_HAVE_LIBUNWIND && defined(MPL_HAVE_LIBUNWIND_H) > --- > > #elif defined MPL_HAVE_LIBUNWIND > loki bt 165 > > > > I also got a lot of errors for Sun C. I don't know if they break > anything or are just a kind of "warning". > > loki mpich-master-v3.2-88-gbbb40df74d46-Linux.x86_64.64_cc 176 > loki mpich-master-v3.2-88-gbbb40df74d46-Linux.x86_64.64_cc 176 grep error: log.make.Linux.x86_64.64_cc | sort | uniq > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/channels/nemesis/include/mpid_nem_datatypes.h", line 156: warning: > syntax error: empty member declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/channels/nemesis/include/mpid_nem_datatypes.h", line 161: warning: > syntax error: empty member declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/channels/nemesis/src/ch3_win_fns.c", line 17: warning: syntax error: > empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/include/mpid_rma_lockqueue.h", line 13: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/include/mpid_rma_lockqueue.h", line 14: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/include/mpid_rma_oplist.h", line 21: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/include/mpidi_recvq_statistics.h", line 13: warning: syntax error: > empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_recvq.c", line 100: warning: syntax error: empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_recvq.c", line 103: warning: syntax error: empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_recvq.c", line 95: warning: syntax error: empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_recvq.c", line 96: warning: syntax error: empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_recvq.c", line 97: warning: syntax error: empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_recvq.c", line 98: warning: syntax error: empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_recvq.c", line 99: warning: syntax error: empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_ops.c", line 9: warning: syntax error: empty declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 10: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 11: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 12: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 13: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 14: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 15: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 16: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 17: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 18: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 19: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 20: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 21: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 22: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 23: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 24: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_pkthandler.c", line 25: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_sync.c", line 259: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_sync.c", line 260: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_sync.c", line 261: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_sync.c", line 263: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_rma_sync.c", line 264: warning: syntax error: empty > declaration > "../mpich-master-v3.2-88-gbbb40df74d46/src/mpid/ch3/src/ch3u_win_fns.c", line 11: warning: syntax error: empty declaration > loki mpich-master-v3.2-88-gbbb40df74d46-Linux.x86_64.64_cc 177 > > > I'll try to test this version later and let you know if something doesn't > work as expected. > > > Best regards and thank you very much for your help again > > Siegmar > > > On 01/19/16 18:45, Rob Latham wrote: >> >> >> On 01/16/2016 02:35 AM, Siegmar Gross wrote: >>> Hi Rob, >>> >>> I've attached the files for both compilers. >>> >>> Best regards and thank you very much for your help >> >> It looks like the compiler doesn't matter in your environment. >> >> I did find one more spot to update, and now with your mplconfig.h in place I get no warnings. >> >> From the messages you included, it still looks like MPICH is trying to compile the libunwind functions, even though >> I've done everything I can to check for that. >> >> If the attached patch does nothing for you, then I will simply remove libunwind support until I can set up a suse >> virtual machine and figure out what's going on. >> >> ==rob >> >>> >>> Siegmar >>> >>> >>> Am 15.01.2016 um 16:55 schrieb Rob Latham: >>>> >>>> >>>> On 01/15/2016 06:56 AM, Siegmar Gross wrote: >>>>> Hi Rob, >>>>> >>>>> I had to change "#if" to "#elif", but I still get errors. I've >>>>> attached the >>>>> log files. >>>> >>>> OK, you can see what I'm trying to do, yes? On my end, everything >>>> I've done >>>> to re-create your environment works for me. One more favor: send me your >>>> src/mpl/include/mplconfig.h >>>> >>>> Thanks >>>> ==rob >>>> _______________________________________________ >>>> discuss mailing list discuss(a)mpich.org >>>> To manage subscription options or unsubscribe: >>>> https://lists.mpich.org/mailman/listinfo/discuss >>> >>> >>> _______________________________________________ >>> discuss mailing list discuss(a)mpich.org >>> To manage subscription options or unsubscribe: >>> https://lists.mpich.org/mailman/listinfo/discuss >>> >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Fwd: mpich-3.2 using cygwin
by Halim Amer 02 Feb '16

02 Feb '16

> Are you aware of any porting issues or hurdles with MS-MPI? I don't have experience with MS-MPI, so I cannot tell what features it is missing or other limitations it may have. It also depends on the needs of your applications, but MS-MPI seems to support MPI-2 and some MPI-3 features. --Halim www.mcs.anl.gov/~aamer On 2/2/16 9:14 AM, Bhanu Hariharan wrote: > Thanks Haim. You really answered my question and pointed me in the right > direction. Pursuing MS-MPI might be the real solution for us. > We do have an older version of MPICH2 and I just wanted to update to latest. > > Are you aware of any porting issues or hurdles with MS-MPI? > > > > On Mon, Feb 1, 2016 at 3:47 PM, Halim Amer <aamer(a)anl.gov > <mailto:[email protected]>> wrote: > > We don't support Windows anymore. For more information, refer to > https://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_ca…. > > ---Halim > > www.mcs.anl.gov/~aamer <http://www.mcs.anl.gov/~aamer> > > > On 2/1/16 3:26 PM, Bhanu Hariharan wrote: > > > Hello, > > I am trying to build the mpich-3.2 libs on a Windows 64 bit Vista. > > I am using cygwin and I am following the configure and build > instructions on > http://www.mpich.org/static/downloads/3.2/mpich-3.2-installguide.pdf > > > On launching the configure command, I first ran into OpenPA > errors, so > just to get around it I renamed openpa folder in src to ##openpa > > Then I ran into some fortran errors - I have ifort compiler. > "Could not determine a way to link a Fortran test program!" > > I am sending you c.txt and config.log as was suggested in the .pdf. > Could anyone help me understand why I might be getting the error > and a > way out. > > Thanks in advance, > Regards, > Bhanu > > PS: Separate question: I was able to find .msi for older versions of > mpich2 but not anymore. Can I download .msi for latest mpich2 > versions? > > > > > ------------------------------------------------------------------------ > *DISCLAIMER*: This e-mail and any files transmitted with it > ("Message") > is intended only for the use of the recipient(s) named above and may > contain confidential information. You are hereby notified that the > taking of any action in reliance upon, or any review, > retransmission, > dissemination, distribution, printing or copying of this Message > or any > part thereof by anyone other than the intended recipient(s) is > strictly > prohibited. If you have received this Message in error, you should > delete this Message immediately and advise the sender by return > e-mail. > Opinions, conclusions and other information in this Message that > do not > relate to the official business of PETROTEL or its affiliated > Companies > shall be understood as neither given nor endorsed by PETROTEL or > any of > its affiliated companies. > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org <mailto:[email protected]> > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > > _______________________________________________ > discuss mailing list discuss(a)mpich.org <mailto:[email protected]> > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > > > > ------------------------------------------------------------------------ > *DISCLAIMER*: This e-mail and any files transmitted with it ("Message") > is intended only for the use of the recipient(s) named above and may > contain confidential information. You are hereby notified that the > taking of any action in reliance upon, or any review, retransmission, > dissemination, distribution, printing or copying of this Message or any > part thereof by anyone other than the intended recipient(s) is strictly > prohibited. If you have received this Message in error, you should > delete this Message immediately and advise the sender by return e-mail. > Opinions, conclusions and other information in this Message that do not > relate to the official business of PETROTEL or its affiliated Companies > shall be understood as neither given nor endorsed by PETROTEL or any of > its affiliated companies. > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Fwd: mpich-3.2 using cygwin
by Bhanu Hariharan 02 Feb '16

02 Feb '16

Thanks Haim. You really answered my question and pointed me in the right direction. Pursuing MS-MPI might be the real solution for us. We do have an older version of MPICH2 and I just wanted to update to latest. Are you aware of any porting issues or hurdles with MS-MPI? On Mon, Feb 1, 2016 at 3:47 PM, Halim Amer <aamer(a)anl.gov> wrote: > We don't support Windows anymore. For more information, refer to > https://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_ca… > . > > ---Halim > > www.mcs.anl.gov/~aamer > > > On 2/1/16 3:26 PM, Bhanu Hariharan wrote: > >> >> Hello, >> >> I am trying to build the mpich-3.2 libs on a Windows 64 bit Vista. >> >> I am using cygwin and I am following the configure and build >> instructions on >> http://www.mpich.org/static/downloads/3.2/mpich-3.2-installguide.pdf >> >> >> On launching the configure command, I first ran into OpenPA errors, so >> just to get around it I renamed openpa folder in src to ##openpa >> >> Then I ran into some fortran errors - I have ifort compiler. >> "Could not determine a way to link a Fortran test program!" >> >> I am sending you c.txt and config.log as was suggested in the .pdf. >> Could anyone help me understand why I might be getting the error and a >> way out. >> >> Thanks in advance, >> Regards, >> Bhanu >> >> PS: Separate question: I was able to find .msi for older versions of >> mpich2 but not anymore. Can I download .msi for latest mpich2 versions? >> >> >> >> >> ------------------------------------------------------------------------ >> *DISCLAIMER*: This e-mail and any files transmitted with it ("Message") >> is intended only for the use of the recipient(s) named above and may >> contain confidential information. You are hereby notified that the >> taking of any action in reliance upon, or any review, retransmission, >> dissemination, distribution, printing or copying of this Message or any >> part thereof by anyone other than the intended recipient(s) is strictly >> prohibited. If you have received this Message in error, you should >> delete this Message immediately and advise the sender by return e-mail. >> Opinions, conclusions and other information in this Message that do not >> relate to the official business of PETROTEL or its affiliated Companies >> shall be understood as neither given nor endorsed by PETROTEL or any of >> its affiliated companies. >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> >> _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > -- ------------------------------ *DISCLAIMER*: This e-mail and any files transmitted with it ("Message") is intended only for the use of the recipient(s) named above and may contain confidential information. You are hereby notified that the taking of any action in reliance upon, or any review, retransmission, dissemination, distribution, printing or copying of this Message or any part thereof by anyone other than the intended recipient(s) is strictly prohibited. If you have received this Message in error, you should delete this Message immediately and advise the sender by return e-mail. Opinions, conclusions and other information in this Message that do not relate to the official business of PETROTEL or its affiliated Companies shall be understood as neither given nor endorsed by PETROTEL or any of its affiliated companies. _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Fwd: mpich-3.2 using cygwin
by Jeff Hammond 02 Feb '16

02 Feb '16

Ok. I did not realize you added Cygwin to the list of unsupported platforms. Please do not lump Cygwin into Windows. Just say you don't support Cygwin. Equating Cygwin to Windows is both incorrect and insulting to a fantastic project that approximates Linux in every meaningful way, at least in my experience. I assume you still support FreeBSD running on top of Windows via VirtualBox. FreeBSD is also an approximation to Linux ;-) Jeff On Mon, Feb 1, 2016 at 9:57 PM, Halim Amer <aamer(a)anl.gov> wrote: > Cygwin isn't Linux either. Being an approximate Linux platform does not > change the fact that we don't support it. > > --Halim > > On 2/1/16 6:09 PM, Jeff Hammond wrote: > >> Cygwin isn't Windows. Cygwin is a very good approximation to Linux that >> happens to run on top of Windows. >> >> Jeff >> >> On Mon, Feb 1, 2016 at 1:47 PM, Halim Amer <aamer(a)anl.gov >> <mailto:[email protected]>> wrote: >> >> We don't support Windows anymore. For more information, refer to >> >> https://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_ca… >> . >> >> ---Halim >> >> www.mcs.anl.gov/~aamer <http://www.mcs.anl.gov/~aamer> >> >> >> On 2/1/16 3:26 PM, Bhanu Hariharan wrote: >> >> >> Hello, >> >> I am trying to build the mpich-3.2 libs on a Windows 64 bit Vista. >> >> I am using cygwin and I am following the configure and build >> instructions on >> >> http://www.mpich.org/static/downloads/3.2/mpich-3.2-installguide.pdf >> >> >> On launching the configure command, I first ran into OpenPA >> errors, so >> just to get around it I renamed openpa folder in src to ##openpa >> >> Then I ran into some fortran errors - I have ifort compiler. >> "Could not determine a way to link a Fortran test program!" >> >> I am sending you c.txt and config.log as was suggested in the >> .pdf. >> Could anyone help me understand why I might be getting the error >> and a >> way out. >> >> Thanks in advance, >> Regards, >> Bhanu >> >> PS: Separate question: I was able to find .msi for older versions >> of >> mpich2 but not anymore. Can I download .msi for latest mpich2 >> versions? >> >> >> >> >> >> ------------------------------------------------------------------------ >> *DISCLAIMER*: This e-mail and any files transmitted with it >> ("Message") >> is intended only for the use of the recipient(s) named above and >> may >> contain confidential information. You are hereby notified that the >> taking of any action in reliance upon, or any review, >> retransmission, >> dissemination, distribution, printing or copying of this Message >> or any >> part thereof by anyone other than the intended recipient(s) is >> strictly >> prohibited. If you have received this Message in error, you should >> delete this Message immediately and advise the sender by return >> e-mail. >> Opinions, conclusions and other information in this Message that >> do not >> relate to the official business of PETROTEL or its affiliated >> Companies >> shall be understood as neither given nor endorsed by PETROTEL or >> any of >> its affiliated companies. >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org <mailto:[email protected]> >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org <mailto:[email protected]> >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> >> >> >> >> -- >> Jeff Hammond >> jeff.science(a)gmail.com <mailto:[email protected]> >> http://jeffhammond.github.io/ >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> >> _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > -- Jeff Hammond jeff.science(a)gmail.com http://jeffhammond.github.io/ _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Fwd: mpich-3.2 using cygwin
by Halim Amer 01 Feb '16

01 Feb '16

Cygwin isn't Linux either. Being an approximate Linux platform does not change the fact that we don't support it. --Halim On 2/1/16 6:09 PM, Jeff Hammond wrote: > Cygwin isn't Windows. Cygwin is a very good approximation to Linux that > happens to run on top of Windows. > > Jeff > > On Mon, Feb 1, 2016 at 1:47 PM, Halim Amer <aamer(a)anl.gov > <mailto:[email protected]>> wrote: > > We don't support Windows anymore. For more information, refer to > https://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_ca…. > > ---Halim > > www.mcs.anl.gov/~aamer <http://www.mcs.anl.gov/~aamer> > > On 2/1/16 3:26 PM, Bhanu Hariharan wrote: > > > Hello, > > I am trying to build the mpich-3.2 libs on a Windows 64 bit Vista. > > I am using cygwin and I am following the configure and build > instructions on > http://www.mpich.org/static/downloads/3.2/mpich-3.2-installguide.pdf > > > On launching the configure command, I first ran into OpenPA > errors, so > just to get around it I renamed openpa folder in src to ##openpa > > Then I ran into some fortran errors - I have ifort compiler. > "Could not determine a way to link a Fortran test program!" > > I am sending you c.txt and config.log as was suggested in the .pdf. > Could anyone help me understand why I might be getting the error > and a > way out. > > Thanks in advance, > Regards, > Bhanu > > PS: Separate question: I was able to find .msi for older versions of > mpich2 but not anymore. Can I download .msi for latest mpich2 > versions? > > > > > ------------------------------------------------------------------------ > *DISCLAIMER*: This e-mail and any files transmitted with it > ("Message") > is intended only for the use of the recipient(s) named above and may > contain confidential information. You are hereby notified that the > taking of any action in reliance upon, or any review, > retransmission, > dissemination, distribution, printing or copying of this Message > or any > part thereof by anyone other than the intended recipient(s) is > strictly > prohibited. If you have received this Message in error, you should > delete this Message immediately and advise the sender by return > e-mail. > Opinions, conclusions and other information in this Message that > do not > relate to the official business of PETROTEL or its affiliated > Companies > shall be understood as neither given nor endorsed by PETROTEL or > any of > its affiliated companies. > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org <mailto:[email protected]> > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > > _______________________________________________ > discuss mailing list discuss(a)mpich.org <mailto:[email protected]> > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > > > > > -- > Jeff Hammond > jeff.science(a)gmail.com <mailto:[email protected]> > http://jeffhammond.github.io/ > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Fwd: mpich-3.2 using cygwin
by Jeff Hammond 01 Feb '16

01 Feb '16

Please use a Cygwin file path that doesn't have a space in it. Using ifort for Windows may not work with Cygwin. Please try with Cygwin's gfortran instead. Jeff configure:31368: gcc -c -I/cygdrive/c/Program Files/MPICH-3.2/mpich-3.2/src/mpl/include -I/cygdrive/c/Program Files/MPICH-3.2/mpich-3.2/src/mpl/include -D_REENTRANT conftest.c >&5 gcc: Files/MPICH-3.2/mpich-3.2/src/mpl/include: No such file or directory gcc: Files/MPICH-3.2/mpich-3.2/src/mpl/include: No such file or directory On Mon, Feb 1, 2016 at 1:26 PM, Bhanu Hariharan <bhanu(a)petrotel.com> wrote: > > Hello, > > I am trying to build the mpich-3.2 libs on a Windows 64 bit Vista. > > I am using cygwin and I am following the configure and build instructions > on http://www.mpich.org/static/downloads/3.2/mpich-3.2-installguide.pdf > > > On launching the configure command, I first ran into OpenPA errors, so > just to get around it I renamed openpa folder in src to ##openpa > > Then I ran into some fortran errors - I have ifort compiler. > "Could not determine a way to link a Fortran test program!" > > I am sending you c.txt and config.log as was suggested in the .pdf. > Could anyone help me understand why I might be getting the error and a way > out. > > Thanks in advance, > Regards, > Bhanu > > PS: Separate question: I was able to find .msi for older versions of > mpich2 but not anymore. Can I download .msi for latest mpich2 versions? > > > > > ------------------------------ > *DISCLAIMER*: This e-mail and any files transmitted with it ("Message") > is intended only for the use of the recipient(s) named above and may > contain confidential information. You are hereby notified that the taking > of any action in reliance upon, or any review, retransmission, > dissemination, distribution, printing or copying of this Message or any > part thereof by anyone other than the intended recipient(s) is strictly > prohibited. If you have received this Message in error, you should delete > this Message immediately and advise the sender by return e-mail. Opinions, > conclusions and other information in this Message that do not relate to the > official business of PETROTEL or its affiliated Companies shall be > understood as neither given nor endorsed by PETROTEL or any of its > affiliated companies. > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > -- Jeff Hammond jeff.science(a)gmail.com http://jeffhammond.github.io/ _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Fwd: mpich-3.2 using cygwin
by Jeff Hammond 01 Feb '16

01 Feb '16

Cygwin isn't Windows. Cygwin is a very good approximation to Linux that happens to run on top of Windows. Jeff On Mon, Feb 1, 2016 at 1:47 PM, Halim Amer <aamer(a)anl.gov> wrote: > We don't support Windows anymore. For more information, refer to > https://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_ca… > . > > ---Halim > > www.mcs.anl.gov/~aamer > > On 2/1/16 3:26 PM, Bhanu Hariharan wrote: > >> >> Hello, >> >> I am trying to build the mpich-3.2 libs on a Windows 64 bit Vista. >> >> I am using cygwin and I am following the configure and build >> instructions on >> http://www.mpich.org/static/downloads/3.2/mpich-3.2-installguide.pdf >> >> >> On launching the configure command, I first ran into OpenPA errors, so >> just to get around it I renamed openpa folder in src to ##openpa >> >> Then I ran into some fortran errors - I have ifort compiler. >> "Could not determine a way to link a Fortran test program!" >> >> I am sending you c.txt and config.log as was suggested in the .pdf. >> Could anyone help me understand why I might be getting the error and a >> way out. >> >> Thanks in advance, >> Regards, >> Bhanu >> >> PS: Separate question: I was able to find .msi for older versions of >> mpich2 but not anymore. Can I download .msi for latest mpich2 versions? >> >> >> >> >> ------------------------------------------------------------------------ >> *DISCLAIMER*: This e-mail and any files transmitted with it ("Message") >> is intended only for the use of the recipient(s) named above and may >> contain confidential information. You are hereby notified that the >> taking of any action in reliance upon, or any review, retransmission, >> dissemination, distribution, printing or copying of this Message or any >> part thereof by anyone other than the intended recipient(s) is strictly >> prohibited. If you have received this Message in error, you should >> delete this Message immediately and advise the sender by return e-mail. >> Opinions, conclusions and other information in this Message that do not >> relate to the official business of PETROTEL or its affiliated Companies >> shall be understood as neither given nor endorsed by PETROTEL or any of >> its affiliated companies. >> >> >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> >> _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > -- Jeff Hammond jeff.science(a)gmail.com http://jeffhammond.github.io/ _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Fwd: mpich-3.2 using cygwin
by Jeff Hammond 01 Feb '16

01 Feb '16

On Mon, Feb 1, 2016 at 1:26 PM, Bhanu Hariharan <bhanu(a)petrotel.com> wrote: > > Hello, > > I am trying to build the mpich-3.2 libs on a Windows 64 bit Vista. > > I am using cygwin and I am following the configure and build instructions > on http://www.mpich.org/static/downloads/3.2/mpich-3.2-installguide.pdf > > > On launching the configure command, I first ran into OpenPA errors, so > just to get around it I renamed openpa folder in src to ##openpa > > Why is this a solution? What is the real problem with OpenPA? Renaming the source folder is not solving any problem, just hiding or deferring it. Unfortunately, I do not have access to Cygwin right now, but I will try to patch OpenPA if the problem is described clearly. Jeff > Then I ran into some fortran errors - I have ifort compiler. > "Could not determine a way to link a Fortran test program!" > > I am sending you c.txt and config.log as was suggested in the .pdf. > Could anyone help me understand why I might be getting the error and a way > out. > > Thanks in advance, > Regards, > Bhanu > > PS: Separate question: I was able to find .msi for older versions of > mpich2 but not anymore. Can I download .msi for latest mpich2 versions? > > > > > ------------------------------ > *DISCLAIMER*: This e-mail and any files transmitted with it ("Message") > is intended only for the use of the recipient(s) named above and may > contain confidential information. You are hereby notified that the taking > of any action in reliance upon, or any review, retransmission, > dissemination, distribution, printing or copying of this Message or any > part thereof by anyone other than the intended recipient(s) is strictly > prohibited. If you have received this Message in error, you should delete > this Message immediately and advise the sender by return e-mail. Opinions, > conclusions and other information in this Message that do not relate to the > official business of PETROTEL or its affiliated Companies shall be > understood as neither given nor endorsed by PETROTEL or any of its > affiliated companies. > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > -- Jeff Hammond jeff.science(a)gmail.com http://jeffhammond.github.io/ _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Re: [mpich-discuss] Fwd: mpich-3.2 using cygwin
by Halim Amer 01 Feb '16

01 Feb '16

We don't support Windows anymore. For more information, refer to https://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_Why_ca…. ---Halim www.mcs.anl.gov/~aamer On 2/1/16 3:26 PM, Bhanu Hariharan wrote: > > Hello, > > I am trying to build the mpich-3.2 libs on a Windows 64 bit Vista. > > I am using cygwin and I am following the configure and build > instructions on > http://www.mpich.org/static/downloads/3.2/mpich-3.2-installguide.pdf > > > On launching the configure command, I first ran into OpenPA errors, so > just to get around it I renamed openpa folder in src to ##openpa > > Then I ran into some fortran errors - I have ifort compiler. > "Could not determine a way to link a Fortran test program!" > > I am sending you c.txt and config.log as was suggested in the .pdf. > Could anyone help me understand why I might be getting the error and a > way out. > > Thanks in advance, > Regards, > Bhanu > > PS: Separate question: I was able to find .msi for older versions of > mpich2 but not anymore. Can I download .msi for latest mpich2 versions? > > > > > ------------------------------------------------------------------------ > *DISCLAIMER*: This e-mail and any files transmitted with it ("Message") > is intended only for the use of the recipient(s) named above and may > contain confidential information. You are hereby notified that the > taking of any action in reliance upon, or any review, retransmission, > dissemination, distribution, printing or copying of this Message or any > part thereof by anyone other than the intended recipient(s) is strictly > prohibited. If you have received this Message in error, you should > delete this Message immediately and advise the sender by return e-mail. > Opinions, conclusions and other information in this Message that do not > relate to the official business of PETROTEL or its affiliated Companies > shall be understood as neither given nor endorsed by PETROTEL or any of > its affiliated companies. > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss > _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0

Fwd: mpich-3.2 using cygwin
by Bhanu Hariharan 01 Feb '16

01 Feb '16

Hello, I am trying to build the mpich-3.2 libs on a Windows 64 bit Vista. I am using cygwin and I am following the configure and build instructions on http://www.mpich.org/static/downloads/3.2/mpich-3.2-installguide.pdf On launching the configure command, I first ran into OpenPA errors, so just to get around it I renamed openpa folder in src to ##openpa Then I ran into some fortran errors - I have ifort compiler. "Could not determine a way to link a Fortran test program!" I am sending you c.txt and config.log as was suggested in the .pdf. Could anyone help me understand why I might be getting the error and a way out. Thanks in advance, Regards, Bhanu PS: Separate question: I was able to find .msi for older versions of mpich2 but not anymore. Can I download .msi for latest mpich2 versions? -- ------------------------------ *DISCLAIMER*: This e-mail and any files transmitted with it ("Message") is intended only for the use of the recipient(s) named above and may contain confidential information. You are hereby notified that the taking of any action in reliance upon, or any review, retransmission, dissemination, distribution, printing or copying of this Message or any part thereof by anyone other than the intended recipient(s) is strictly prohibited. If you have received this Message in error, you should delete this Message immediately and advise the sender by return e-mail. Opinions, conclusions and other information in this Message that do not relate to the official business of PETROTEL or its affiliated Companies shall be understood as neither given nor endorsed by PETROTEL or any of its affiliated companies. _______________________________________________ discuss mailing list discuss(a)mpich.org To manage subscription options or unsubscribe: https://lists.mpich.org/mailman/listinfo/discuss

1 0