discuss

Download

[email protected]

June 2013

38 participants
246 discussions

Re: [mpich-discuss] mpich hangs
by Syed. Jahanzeb Maqbool Hashmi 27 Jun '13

27 Jun '13

and here is that output: Process 0 of 8 is on weiser1 Process 1 of 8 is on weiser1 Process 2 of 8 is on weiser1 Process 3 of 8 is on weiser1 Process 4 of 8 is on weiser2 Process 5 of 8 is on weiser2 Process 6 of 8 is on weiser2 Process 7 of 8 is on weiser2 pi is approximately 3.1415926544231247, Error is 0.0000000008333316 wall clock time = 0.018203 --------------- On Fri, Jun 28, 2013 at 12:35 PM, Syed. Jahanzeb Maqbool Hashmi < jahanzeb.maqbool(a)gmail.com> wrote: > Yes I am successfully able to run cpi program. No such error at all. > > > > On Fri, Jun 28, 2013 at 12:31 PM, Jeff Hammond <jeff.science(a)gmail.com>wrote: > >> Can you run the cpi program? If that doesn't run, something is wrong, >> because that program is trivial and correct. >> >> Jeff >> >> On Thu, Jun 27, 2013 at 10:29 PM, Syed. Jahanzeb Maqbool Hashmi >> <jahanzeb.maqbool(a)gmail.com> wrote: >> > again that same error: >> > Fatal error in PMPI_Wait: A process has failed, error stack: >> > PMPI_Wait(180)............: MPI_Wait(request=0xbebb9a1c, >> status=0xbebb99f0) >> > failed >> > MPIR_Wait_impl(77)........: >> > dequeue_and_set_error(888): Communication error with rank 4 >> > >> > here is the verbose output: >> > >> > --------------START------------------ >> > >> > host: weiser1 >> > host: weiser2 >> > >> > >> ================================================================================================== >> > mpiexec options: >> > ---------------- >> > Base path: /mnt/nfs/install/mpich-install/bin/ >> > Launcher: (null) >> > Debug level: 1 >> > Enable X: -1 >> > >> > Global environment: >> > ------------------- >> > TERM=xterm >> > SHELL=/bin/bash >> > >> > >> XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422 >> > SSH_CLIENT=192.168.0.3 57311 22 >> > OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1 >> > SSH_TTY=/dev/pts/0 >> > USER=linaro >> > >> > >> LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35 >> >> :*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36: >> > LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib >> > MAIL=/var/mail/linaro >> > >> > >> PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin >> > PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a >> > LANG=C.UTF-8 >> > SHLVL=1 >> > HOME=/home/linaro >> > LOGNAME=linaro >> > SSH_CONNECTION=192.168.0.3 57311 192.168.0.101 22 >> > LESSOPEN=| /usr/bin/lesspipe %s >> > LESSCLOSE=/usr/bin/lesspipe %s %s >> > _=/mnt/nfs/install/mpich-install/bin/mpiexec >> > >> > Hydra internal environment: >> > --------------------------- >> > GFORTRAN_UNBUFFERED_PRECONNECTED=y >> > >> > >> > Proxy information: >> > ********************* >> > [1] proxy: weiser1 (4 cores) >> > Exec list: ./xhpl (4 processes); >> > >> > [2] proxy: weiser2 (4 cores) >> > Exec list: ./xhpl (4 processes); >> > >> > >> > >> ================================================================================================== >> > >> > [mpiexec@weiser1] Timeout set to -1 (-1 means infinite) >> > [mpiexec@weiser1] Got a control port string of weiser1:45851 >> > >> > Proxy launch args: /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy >> > --control-port weiser1:45851 --debug --rmk user --launcher ssh --demux >> poll >> > --pgid 0 --retries 10 --usize -2 --proxy-id >> > >> > Arguments being passed to proxy 0: >> > --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname >> > weiser1 --global-core-map 0,4,8 --pmi-id-map 0,0 --global-process-count >> 8 >> > --auto-cleanup 1 --pmi-kvsname kvs_24541_0 --pmi-process-mapping >> > (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' >> > 'SHELL=/bin/bash' >> > >> 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' >> > 'SSH_CLIENT=192.168.0.3 57311 22' >> > 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' >> > 'USER=linaro' >> > >> 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;3 >> >> 5:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' >> > 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' >> > 'MAIL=/var/mail/linaro' >> > >> 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' >> > 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' >> > 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' >> 'SSH_CONNECTION=192.168.0.3 >> > 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' >> > 'LESSCLOSE=/usr/bin/lesspipe %s %s' >> > '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 >> > --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' >> > --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 >> > --exec-local-env 0 --exec-wdir >> > /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl >> > >> > Arguments being passed to proxy 1: >> > --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname >> > weiser2 --global-core-map 0,4,8 --pmi-id-map 0,4 --global-process-count >> 8 >> > --auto-cleanup 1 --pmi-kvsname kvs_24541_0 --pmi-process-mapping >> > (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' >> > 'SHELL=/bin/bash' >> > >> 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' >> > 'SSH_CLIENT=192.168.0.3 57311 22' >> > 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' >> > 'USER=linaro' >> > >> 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;3 >> >> 5:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' >> > 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' >> > 'MAIL=/var/mail/linaro' >> > >> 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' >> > 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' >> > 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' >> 'SSH_CONNECTION=192.168.0.3 >> > 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' >> > 'LESSCLOSE=/usr/bin/lesspipe %s %s' >> > '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 >> > --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' >> > --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 >> > --exec-local-env 0 --exec-wdir >> > /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl >> > >> > [mpiexec@weiser1] Launch arguments: >> > /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy --control-port >> > weiser1:45851 --debug --rmk user --launcher ssh --demux poll --pgid 0 >> > --retries 10 --usize -2 --proxy-id 0 >> > [mpiexec@weiser1] Launch arguments: /usr/bin/ssh -x weiser2 >> > "/mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy" --control-port >> > weiser1:45851 --debug --rmk user --launcher ssh --demux poll --pgid 0 >> > --retries 10 --usize -2 --proxy-id 1 >> > [proxy:0:0@weiser1] got pmi command (from 0): init >> > pmi_version=1 pmi_subversion=1 >> > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 >> > pmi_subversion=1 rc=0 >> > [proxy:0:0@weiser1] got pmi command (from 0): get_maxes >> > >> > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 >> keylen_max=64 >> > vallen_max=1024 >> > [proxy:0:0@weiser1] got pmi command (from 15): init >> > pmi_version=1 pmi_subversion=1 >> > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 >> > pmi_subversion=1 rc=0 >> > [proxy:0:0@weiser1] got pmi command (from 15): get_maxes >> > >> > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 >> keylen_max=64 >> > vallen_max=1024 >> > [proxy:0:0@weiser1] got pmi command (from 8): init >> > pmi_version=1 pmi_subversion=1 >> > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 >> > pmi_subversion=1 rc=0 >> > [proxy:0:0@weiser1] got pmi command (from 0): get_appnum >> > >> > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 >> > [proxy:0:0@weiser1] got pmi command (from 15): get_appnum >> > >> > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 >> > [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname >> > >> > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:0@weiser1] got pmi command (from 8): get_maxes >> > >> > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 >> keylen_max=64 >> > vallen_max=1024 >> > [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname >> > >> > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:0@weiser1] got pmi command (from 6): init >> > pmi_version=1 pmi_subversion=1 >> > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 >> > pmi_subversion=1 rc=0 >> > [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname >> > >> > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:0@weiser1] got pmi command (from 0): get >> > kvsname=kvs_24541_0 key=PMI_process_mapping >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=(vector,(0,2,4)) >> > [proxy:0:0@weiser1] got pmi command (from 8): get_appnum >> > >> > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 >> > [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname >> > >> > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname >> > >> > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:0@weiser1] got pmi command (from 0): put >> > kvsname=kvs_24541_0 key=sharedFilename[0] >> > value=/dev/shm/mpich_shar_tmpnEZdQ9 >> > [proxy:0:0@weiser1] cached command: >> > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 >> > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:0@weiser1] got pmi command (from 15): get >> > kvsname=kvs_24541_0 key=PMI_process_mapping >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=(vector,(0,2,4)) >> > [proxy:0:0@weiser1] got pmi command (from 0): barrier_in >> > >> > [proxy:0:0@weiser1] got pmi command (from 6): get_maxes >> > >> > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 >> keylen_max=64 >> > vallen_max=1024 >> > [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname >> > >> > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:0@weiser1] got pmi command (from 15): barrier_in >> > >> > [proxy:0:0@weiser1] got pmi command (from 8): get >> > kvsname=kvs_24541_0 key=PMI_process_mapping >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=(vector,(0,2,4)) >> > [proxy:0:0@weiser1] got pmi command (from 6): get_appnum >> > >> > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 >> > [proxy:0:0@weiser1] got pmi command (from 8): barrier_in >> > >> > [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname >> > >> > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname >> > >> > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:0@weiser1] got pmi command (from 6): get >> > kvsname=kvs_24541_0 key=PMI_process_mapping >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=(vector,(0,2,4)) >> > [proxy:0:0@weiser1] got pmi command (from 6): barrier_in >> > >> > [proxy:0:0@weiser1] flushing 1 put command(s) out >> > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put >> > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 >> > [proxy:0:0@weiser1] forwarding command (cmd=put >> > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9) upstream >> > [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream >> > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in >> > [proxy:0:1@weiser2] got pmi command (from 7): init >> > pmi_version=1 pmi_subversion=1 >> > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 >> > pmi_subversion=1 rc=0 >> > [proxy:0:1@weiser2] got pmi command (from 5): init >> > pmi_version=1 pmi_subversion=1 >> > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 >> > pmi_subversion=1 rc=0 >> > [proxy:0:1@weiser2] got pmi command (from 7): get_maxes >> > >> > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 >> keylen_max=64 >> > vallen_max=1024 >> > [proxy:0:1@weiser2] got pmi command (from 4): init >> > pmi_version=1 pmi_subversion=1 >> > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 >> > pmi_subversion=1 rc=0 >> > [proxy:0:1@weiser2] got pmi command (from 7): get_appnum >> > >> > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 >> > [proxy:0:1@weiser2] got pmi command (from 4): get_maxes >> > >> > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 >> keylen_max=64 >> > vallen_max=1024 >> > [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname >> > >> > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:1@weiser2] got pmi command (from 4): get_appnum >> > >> > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 >> > [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname >> > >> > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname >> > >> > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:1@weiser2] got pmi command (from 7): get >> > kvsname=kvs_24541_0 key=PMI_process_mapping >> > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success >> > value=(vector,(0,2,4)) >> > [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname >> > >> > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:1@weiser2] got pmi command (from 7): barrier_in >> > >> > [proxy:0:1@weiser2] got pmi command (from 4): get >> > kvsname=kvs_24541_0 key=PMI_process_mapping >> > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success >> > value=(vector,(0,2,4)) >> > [proxy:0:1@weiser2] got pmi command (from 5): get_maxes >> > >> > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 >> keylen_max=64 >> > vallen_max=1024 >> > [proxy:0:1@weiser2] got pmi command (from 5): get_appnum >> > >> > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 >> > [proxy:0:1@weiser2] got pmi command (from 4): put >> > kvsname=kvs_24541_0 key=sharedFilename[4] >> > value=/dev/shm/mpich_shar_tmpuKzlSa >> > [proxy:0:1@weiser2] cached command: >> > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa >> > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname >> > >> > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:1@weiser2] got pmi command (from 4): barrier_in >> > >> > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put >> > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa >> > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in >> > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=keyval_cache >> > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 >> > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa >> > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=keyval_cache >> > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 >> > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa >> > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=barrier_out >> > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=barrier_out >> > [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname >> > >> > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:1@weiser2] got pmi command (from 5): get >> > kvsname=kvs_24541_0 key=PMI_process_mapping >> > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success >> > value=(vector,(0,2,4)) >> > [proxy:0:1@weiser2] got pmi command (from 10): init >> > pmi_version=1 pmi_subversion=1 >> > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 >> > pmi_subversion=1 rc=0 >> > [proxy:0:1@weiser2] got pmi command (from 5): barrier_in >> > >> > [proxy:0:1@weiser2] got pmi command (from 10): get_maxes >> > >> > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 >> keylen_max=64 >> > vallen_max=1024 >> > [proxy:0:1@weiser2] got pmi command (from 10): get_appnum >> > >> > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 >> > [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname >> > >> > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname >> > >> > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 >> > [proxy:0:1@weiser2] got pmi command (from 10): get >> > kvsname=kvs_24541_0 key=PMI_process_mapping >> > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success >> > value=(vector,(0,2,4)) >> > [proxy:0:1@weiser2] got pmi command (from 10): barrier_in >> > >> > [proxy:0:1@weiser2] flushing 1 put command(s) out >> > [proxy:0:1@weiser2] forwarding command (cmd=put >> > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa) upstream >> > [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream >> > [proxy:0:0@weiser1] PMI response: cmd=barrier_out >> > [proxy:0:0@weiser1] PMI response: cmd=barrier_out >> > [proxy:0:0@weiser1] PMI response: cmd=barrier_out >> > [proxy:0:0@weiser1] PMI response: cmd=barrier_out >> > [proxy:0:0@weiser1] got pmi command (from 6): get >> > kvsname=kvs_24541_0 key=sharedFilename[0] >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=/dev/shm/mpich_shar_tmpnEZdQ9 >> > [proxy:0:1@weiser2] PMI response: cmd=barrier_out >> > [proxy:0:1@weiser2] PMI response: cmd=barrier_out >> > [proxy:0:1@weiser2] PMI response: cmd=barrier_out >> > [proxy:0:1@weiser2] PMI response: cmd=barrier_out >> > [proxy:0:1@weiser2] got pmi command (from 5): get >> > kvsname=kvs_24541_0 key=sharedFilename[4] >> > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success >> > value=/dev/shm/mpich_shar_tmpuKzlSa >> > [proxy:0:1@weiser2] got pmi command (from 7): get >> > kvsname=kvs_24541_0 key=sharedFilename[4] >> > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success >> > value=/dev/shm/mpich_shar_tmpuKzlSa >> > [proxy:0:1@weiser2] got pmi command (from 10): get >> > kvsname=kvs_24541_0 key=sharedFilename[4] >> > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success >> > value=/dev/shm/mpich_shar_tmpuKzlSa >> > [proxy:0:0@weiser1] got pmi command (from 8): get >> > kvsname=kvs_24541_0 key=sharedFilename[0] >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=/dev/shm/mpich_shar_tmpnEZdQ9 >> > [proxy:0:0@weiser1] got pmi command (from 15): get >> > kvsname=kvs_24541_0 key=sharedFilename[0] >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=/dev/shm/mpich_shar_tmpnEZdQ9 >> > [proxy:0:0@weiser1] got pmi command (from 0): put >> > kvsname=kvs_24541_0 key=P0-businesscard >> > value=description#weiser1$port#56190$ifname#192.168.0.101$ >> > [proxy:0:0@weiser1] cached command: >> > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ >> > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:0@weiser1] got pmi command (from 8): put >> > kvsname=kvs_24541_0 key=P2-businesscard >> > value=description#weiser1$port#40019$ifname#192.168.0.101$ >> > [proxy:0:0@weiser1] cached command: >> > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ >> > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:0@weiser1] got pmi command (from 15): put >> > kvsname=kvs_24541_0 key=P3-businesscard >> > value=description#weiser1$port#57150$ifname#192.168.0.101$ >> > [proxy:0:0@weiser1] cached command: >> > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ >> > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:0@weiser1] got pmi command (from 0): barrier_in >> > >> > [proxy:0:0@weiser1] got pmi command (from 6): put >> > kvsname=kvs_24541_0 key=P1-businesscard >> > value=description#weiser1$port#34048$ifname#192.168.0.101$ >> > [proxy:0:0@weiser1] cached command: >> > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ >> > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:0@weiser1] got pmi command (from 8): barrier_in >> > >> > [proxy:0:0@weiser1] got pmi command (from 6): barrier_in >> > >> > [proxy:0:0@weiser1] got pmi command (from 15): barrier_in >> > >> > [proxy:0:0@weiser1] flushing 4 put command(s) out >> > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put >> > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ >> > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ >> > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ >> > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ >> > [proxy:0:0@weiser1] forwarding command (cmd=put >> > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ >> > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ >> > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ >> > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$) >> > upstream >> > [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream >> > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in >> > [proxy:0:1@weiser2] got pmi command (from 4): put >> > kvsname=kvs_24541_0 key=P4-businesscard >> > value=description#weiser2$port#60693$ifname#192.168.0.102$ >> > [proxy:0:1@weiser2] cached command: >> > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ >> > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:1@weiser2] got pmi command (from 5): put >> > kvsname=kvs_24541_0 key=P5-businesscard >> > value=description#weiser2$port#49938$ifname#192.168.0.102$ >> > [proxy:0:1@weiser2] cached command: >> > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ >> > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:1@weiser2] got pmi command (from 7): put >> > kvsname=kvs_24541_0 key=P6-businesscard >> > value=description#weiser2$port#33516$ifname#192.168.0.102$ >> > [proxy:0:1@weiser2] cached command: >> > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ >> > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:1@weiser2] got pmi command (from 10): put >> > kvsname=kvs_24541_0 key=P7-businesscard >> > value=description#weiser2$port#43116$ifname#192.168.0.102$ >> > [proxy:0:1@weiser2] cached command: >> > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ >> > [proxy:0:1@weiser2] [mpiexec@weiser1] [pgid: 0] got PMI command: >> cmd=put >> > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ >> > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ >> > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ >> > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ >> > PMI response: cmd=put_result rc=0 msg=success >> > [proxy:0:1@weiser2] got pmi command (from 4): barrier_in >> > >> > [proxy:0:1@weiser2] got pmi command (from 5): barrier_in >> > >> > [proxy:0:1@weiser2] got pmi command (from 7): barrier_in >> > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in >> > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=keyval_cache >> > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ >> > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ >> > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ >> > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ >> > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ >> > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ >> > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ >> > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ >> > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=keyval_cache >> > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ >> > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ >> > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ >> > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ >> > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ >> > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ >> > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ >> > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ >> > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=barrier_out >> > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=barrier_out >> > [proxy:0:0@weiser1] PMI response: cmd=barrier_out >> > [proxy:0:0@weiser1] >> > [proxy:0:1@weiser2] got pmi command (from 10): barrier_in >> > >> > [proxy:0:1@weiser2] flushing 4 put command(s) out >> > [proxy:0:1@weiser2] forwarding command (cmd=put >> > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ >> > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ >> > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ >> > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$) >> > upstream >> > [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream >> > PMI response: cmd=barrier_out >> > [proxy:0:0@weiser1] PMI response: cmd=barrier_out >> > [proxy:0:0@weiser1] PMI response: cmd=barrier_out >> > [proxy:0:1@weiser2] PMI response: cmd=barrier_out >> > [proxy:0:1@weiser2] PMI response: cmd=barrier_out >> > [proxy:0:1@weiser2] PMI response: cmd=barrier_out >> > [proxy:0:1@weiser2] PMI response: cmd=barrier_out >> > [proxy:0:1@weiser2] got pmi command (from 4): get >> > kvsname=kvs_24541_0 key=P0-businesscard >> > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success >> > value=description#weiser1$port#56190$ifname#192.168.0.101$ >> > >> ================================================================================ >> > HPLinpack 2.1 -- High-Performance Linpack benchmark -- October 26, >> 2012 >> > Written by A. Petitet and R. Clint Whaley, Innovative Computing >> Laboratory, >> > UTK >> > Modified by Piotr Luszczek, Innovative Computing Laboratory, UTK >> > Modified by Julien Langou, University of Colorado Denver >> > >> ================================================================================ >> > >> > An explanation of the input/output parameters follows: >> > T/V : Wall time / encoded variant. >> > N : The order of the coefficient matrix A. >> > NB : The partitioning blocking factor. >> > P : The number of process rows. >> > Q : The number of process columns. >> > Time : Time in seconds to solve the linear system. >> > Gflops : Rate of execution for solving the linear system. >> > >> > The following parameter values will be used: >> > >> > N : 14616 >> > NB : 168 >> > PMAP : Row-major process mapping >> > P : 2 >> > Q : 4 >> > PFACT : Right >> > NBMIN : 4 >> > NDIV : 2 >> > RFACT : Crout >> > BCAST : 1ringM >> > DEPTH : 1 >> > SWAP : Mix (threshold = 64) >> > L1 : transposed form >> > U : transposed form >> > EQUIL : yes >> > ALIGN : 8 double precision words >> > >> > >> -------------------------------------------------------------------------------- >> > >> > - The matrix A is randomly generated for each test. >> > - The following scaled residual check will be computed: >> > ||Ax-b||_oo / ( eps * ( || x ||_oo * || A ||_oo + || b ||_oo ) * >> N ) >> > - The relative machine precision (eps) is taken to be >> > 1.110223e-16 >> > [proxy:0:0@weiser1] got pmi command (from 6): get >> > - Computational tests pass if scaled residuals are less than >> > 16.0 >> > >> > kvsname=kvs_24541_0 key=P5-businesscard >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=description#weiser2$port#49938$ifname#192.168.0.102$ >> > [proxy:0:0@weiser1] got pmi command (from 15): get >> > kvsname=kvs_24541_0 key=P7-businesscard >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=description#weiser2$port#43116$ifname#192.168.0.102$ >> > [proxy:0:0@weiser1] got pmi command (from 8): get >> > kvsname=kvs_24541_0 key=P6-businesscard >> > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success >> > value=description#weiser2$port#33516$ifname#192.168.0.102$ >> > [proxy:0:1@weiser2] got pmi command (from 5): get >> > kvsname=kvs_24541_0 key=P1-businesscard >> > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success >> > value=description#weiser1$port#34048$ifname#192.168.0.101$ >> > >> > >> =================================================================================== >> > = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES >> > = EXIT CODE: 9 >> > = CLEANING UP REMAINING PROCESSES >> > = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES >> > >> =================================================================================== >> > >> > >> > ----------- END -------------- >> > >> > if that can help :( >> > >> > >> > >> > >> > >> > >> > On Fri, Jun 28, 2013 at 12:24 PM, Pavan Balaji <balaji(a)mcs.anl.gov> >> wrote: >> >> >> >> >> >> Looks like your application aborted for some reason. >> >> >> >> -- Pavan >> >> >> >> >> >> On 06/27/2013 10:21 PM, Syed. Jahanzeb Maqbool Hashmi wrote: >> >>> >> >>> My bad, I just found out that there was a duplicate entry like: >> >>> weiser1 127.0.1.1 >> >>> weiser1 192.168.0.101 >> >>> so i removed teh 127.x.x.x. entry and kept the hostfile contents >> similar >> >>> on both nodes. Now previous error is reduced to this one: >> >>> >> >>> ------ START OF OUTPUT ------- >> >>> >> >>> ....some HPL startup string (no final result) >> >>> ...skip..... >> >>> >> >>> >> >>> >> =================================================================================== >> >>> = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES >> >>> = EXIT CODE: 9 >> >>> = CLEANING UP REMAINING PROCESSES >> >>> = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES >> >>> >> >>> >> =================================================================================== >> >>> [proxy:0:0@weiser1] HYD_pmcd_pmip_control_cmd_cb >> >>> (./pm/pmiserv/pmip_cb.c:886): assert (!closed) failed >> >>> [proxy:0:0@weiser1] HYDT_dmxu_poll_wait_for_event >> >>> (./tools/demux/demux_poll.c:77): callback returned error status >> >>> [proxy:0:0@weiser1] main (./pm/pmiserv/pmip.c:206): demux engine >> error >> >>> waiting for event >> >>> [mpiexec@weiser1] HYDT_bscu_wait_for_completion >> >>> (./tools/bootstrap/utils/bscu_wait.c:76): one of the processes >> >>> terminated badly; aborting >> >>> [mpiexec@weiser1] HYDT_bsci_wait_for_completion >> >>> (./tools/bootstrap/src/bsci_wait.c:23): launcher returned error >> waiting >> >>> for completion >> >>> [mpiexec@weiser1] HYD_pmci_wait_for_completion >> >>> (./pm/pmiserv/pmiserv_pmci.c:217): launcher returned error waiting for >> >>> completion >> >>> [mpiexec@weiser1] main (./ui/mpich/mpiexec.c:331): process manager >> error >> >>> waiting for completion >> >>> >> >>> ------ END OF OUTPUT ------- >> >>> >> >>> >> >>> >> >>> On Fri, Jun 28, 2013 at 12:12 PM, Pavan Balaji <balaji(a)mcs.anl.gov >> >>> <mailto:[email protected]>> wrote: >> >>> >> >>> >> >>> On 06/27/2013 10:08 PM, Syed. Jahanzeb Maqbool Hashmi wrote: >> >>> >> >>> >> >>> >> P4-businesscard=description#__weiser2$port#57651$ifname#192.__168.0.102$ >> >>> >> >>> >> P5-businesscard=description#__weiser2$port#52622$ifname#192.__168.0.102$ >> >>> >> >>> >> P6-businesscard=description#__weiser2$port#55935$ifname#192.__168.0.102$ >> >>> >> >>> >> P7-businesscard=description#__weiser2$port#54952$ifname#192.__168.0.102$ >> >>> >> >>> P0-businesscard=description#__weiser1$port#41958$ifname#127.__0.1.1$ >> >>> >> >>> P2-businesscard=description#__weiser1$port#35049$ifname#127.__0.1.1$ >> >>> >> >>> P1-businesscard=description#__weiser1$port#39634$ifname#127.__0.1.1$ >> >>> >> >>> P3-businesscard=description#__weiser1$port#51802$ifname#127.__0.1.1$ >> >>> >> >>> >> >>> >> >>> I have two concerns with your output. Let's start with the first. >> >>> >> >>> Did you look at this question on the FAQ page? >> >>> >> >>> "Is your /etc/hosts file consistent across all nodes? Unless you >> are >> >>> using an external DNS server, the /etc/hosts file on every machine >> >>> should contain the correct IP information about all hosts in the >> >>> system." >> >>> >> >>> >> >>> -- Pavan >> >>> >> >>> -- >> >>> Pavan Balaji >> >>> http://www.mcs.anl.gov/~balaji >> >>> >> >>> >> >> >> >> -- >> >> Pavan Balaji >> >> http://www.mcs.anl.gov/~balaji >> > >> > >> > >> > _______________________________________________ >> > discuss mailing list discuss(a)mpich.org >> > To manage subscription options or unsubscribe: >> > https://lists.mpich.org/mailman/listinfo/discuss >> >> >> >> -- >> Jeff Hammond >> jeff.science(a)gmail.com >> _______________________________________________ >> discuss mailing list discuss(a)mpich.org >> To manage subscription options or unsubscribe: >> https://lists.mpich.org/mailman/listinfo/discuss >> > >

1 0

Re: [mpich-discuss] mpich hangs
by Syed. Jahanzeb Maqbool Hashmi 27 Jun '13

27 Jun '13

Yes I am successfully able to run cpi program. No such error at all. On Fri, Jun 28, 2013 at 12:31 PM, Jeff Hammond <jeff.science(a)gmail.com>wrote: > Can you run the cpi program? If that doesn't run, something is wrong, > because that program is trivial and correct. > > Jeff > > On Thu, Jun 27, 2013 at 10:29 PM, Syed. Jahanzeb Maqbool Hashmi > <jahanzeb.maqbool(a)gmail.com> wrote: > > again that same error: > > Fatal error in PMPI_Wait: A process has failed, error stack: > > PMPI_Wait(180)............: MPI_Wait(request=0xbebb9a1c, > status=0xbebb99f0) > > failed > > MPIR_Wait_impl(77)........: > > dequeue_and_set_error(888): Communication error with rank 4 > > > > here is the verbose output: > > > > --------------START------------------ > > > > host: weiser1 > > host: weiser2 > > > > > ================================================================================================== > > mpiexec options: > > ---------------- > > Base path: /mnt/nfs/install/mpich-install/bin/ > > Launcher: (null) > > Debug level: 1 > > Enable X: -1 > > > > Global environment: > > ------------------- > > TERM=xterm > > SHELL=/bin/bash > > > > > XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422 > > SSH_CLIENT=192.168.0.3 57311 22 > > OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1 > > SSH_TTY=/dev/pts/0 > > USER=linaro > > > > > LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35 > > :*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36: > > LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib > > MAIL=/var/mail/linaro > > > > > PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin > > PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a > > LANG=C.UTF-8 > > SHLVL=1 > > HOME=/home/linaro > > LOGNAME=linaro > > SSH_CONNECTION=192.168.0.3 57311 192.168.0.101 22 > > LESSOPEN=| /usr/bin/lesspipe %s > > LESSCLOSE=/usr/bin/lesspipe %s %s > > _=/mnt/nfs/install/mpich-install/bin/mpiexec > > > > Hydra internal environment: > > --------------------------- > > GFORTRAN_UNBUFFERED_PRECONNECTED=y > > > > > > Proxy information: > > ********************* > > [1] proxy: weiser1 (4 cores) > > Exec list: ./xhpl (4 processes); > > > > [2] proxy: weiser2 (4 cores) > > Exec list: ./xhpl (4 processes); > > > > > > > ================================================================================================== > > > > [mpiexec@weiser1] Timeout set to -1 (-1 means infinite) > > [mpiexec@weiser1] Got a control port string of weiser1:45851 > > > > Proxy launch args: /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy > > --control-port weiser1:45851 --debug --rmk user --launcher ssh --demux > poll > > --pgid 0 --retries 10 --usize -2 --proxy-id > > > > Arguments being passed to proxy 0: > > --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname > > weiser1 --global-core-map 0,4,8 --pmi-id-map 0,0 --global-process-count 8 > > --auto-cleanup 1 --pmi-kvsname kvs_24541_0 --pmi-process-mapping > > (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' > > 'SHELL=/bin/bash' > > > 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' > > 'SSH_CLIENT=192.168.0.3 57311 22' > > 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' > > 'USER=linaro' > > > 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;3 > > 5:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' > > 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' > > 'MAIL=/var/mail/linaro' > > > 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' > > 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' > > 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' > 'SSH_CONNECTION=192.168.0.3 > > 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' > > 'LESSCLOSE=/usr/bin/lesspipe %s %s' > > '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 > > --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' > > --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 > > --exec-local-env 0 --exec-wdir > > /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl > > > > Arguments being passed to proxy 1: > > --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname > > weiser2 --global-core-map 0,4,8 --pmi-id-map 0,4 --global-process-count 8 > > --auto-cleanup 1 --pmi-kvsname kvs_24541_0 --pmi-process-mapping > > (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' > > 'SHELL=/bin/bash' > > > 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' > > 'SSH_CLIENT=192.168.0.3 57311 22' > > 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' > > 'USER=linaro' > > > 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;3 > > 5:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' > > 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' > > 'MAIL=/var/mail/linaro' > > > 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' > > 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' > > 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' > 'SSH_CONNECTION=192.168.0.3 > > 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' > > 'LESSCLOSE=/usr/bin/lesspipe %s %s' > > '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 > > --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' > > --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 > > --exec-local-env 0 --exec-wdir > > /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl > > > > [mpiexec@weiser1] Launch arguments: > > /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy --control-port > > weiser1:45851 --debug --rmk user --launcher ssh --demux poll --pgid 0 > > --retries 10 --usize -2 --proxy-id 0 > > [mpiexec@weiser1] Launch arguments: /usr/bin/ssh -x weiser2 > > "/mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy" --control-port > > weiser1:45851 --debug --rmk user --launcher ssh --demux poll --pgid 0 > > --retries 10 --usize -2 --proxy-id 1 > > [proxy:0:0@weiser1] got pmi command (from 0): init > > pmi_version=1 pmi_subversion=1 > > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 > > pmi_subversion=1 rc=0 > > [proxy:0:0@weiser1] got pmi command (from 0): get_maxes > > > > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 > keylen_max=64 > > vallen_max=1024 > > [proxy:0:0@weiser1] got pmi command (from 15): init > > pmi_version=1 pmi_subversion=1 > > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 > > pmi_subversion=1 rc=0 > > [proxy:0:0@weiser1] got pmi command (from 15): get_maxes > > > > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 > keylen_max=64 > > vallen_max=1024 > > [proxy:0:0@weiser1] got pmi command (from 8): init > > pmi_version=1 pmi_subversion=1 > > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 > > pmi_subversion=1 rc=0 > > [proxy:0:0@weiser1] got pmi command (from 0): get_appnum > > > > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 > > [proxy:0:0@weiser1] got pmi command (from 15): get_appnum > > > > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 > > [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname > > > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:0@weiser1] got pmi command (from 8): get_maxes > > > > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 > keylen_max=64 > > vallen_max=1024 > > [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname > > > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:0@weiser1] got pmi command (from 6): init > > pmi_version=1 pmi_subversion=1 > > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 > > pmi_subversion=1 rc=0 > > [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname > > > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:0@weiser1] got pmi command (from 0): get > > kvsname=kvs_24541_0 key=PMI_process_mapping > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=(vector,(0,2,4)) > > [proxy:0:0@weiser1] got pmi command (from 8): get_appnum > > > > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 > > [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname > > > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname > > > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:0@weiser1] got pmi command (from 0): put > > kvsname=kvs_24541_0 key=sharedFilename[0] > > value=/dev/shm/mpich_shar_tmpnEZdQ9 > > [proxy:0:0@weiser1] cached command: > > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 > > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:0@weiser1] got pmi command (from 15): get > > kvsname=kvs_24541_0 key=PMI_process_mapping > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=(vector,(0,2,4)) > > [proxy:0:0@weiser1] got pmi command (from 0): barrier_in > > > > [proxy:0:0@weiser1] got pmi command (from 6): get_maxes > > > > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 > keylen_max=64 > > vallen_max=1024 > > [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname > > > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:0@weiser1] got pmi command (from 15): barrier_in > > > > [proxy:0:0@weiser1] got pmi command (from 8): get > > kvsname=kvs_24541_0 key=PMI_process_mapping > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=(vector,(0,2,4)) > > [proxy:0:0@weiser1] got pmi command (from 6): get_appnum > > > > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 > > [proxy:0:0@weiser1] got pmi command (from 8): barrier_in > > > > [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname > > > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname > > > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:0@weiser1] got pmi command (from 6): get > > kvsname=kvs_24541_0 key=PMI_process_mapping > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=(vector,(0,2,4)) > > [proxy:0:0@weiser1] got pmi command (from 6): barrier_in > > > > [proxy:0:0@weiser1] flushing 1 put command(s) out > > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put > > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 > > [proxy:0:0@weiser1] forwarding command (cmd=put > > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9) upstream > > [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream > > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in > > [proxy:0:1@weiser2] got pmi command (from 7): init > > pmi_version=1 pmi_subversion=1 > > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 > > pmi_subversion=1 rc=0 > > [proxy:0:1@weiser2] got pmi command (from 5): init > > pmi_version=1 pmi_subversion=1 > > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 > > pmi_subversion=1 rc=0 > > [proxy:0:1@weiser2] got pmi command (from 7): get_maxes > > > > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 > keylen_max=64 > > vallen_max=1024 > > [proxy:0:1@weiser2] got pmi command (from 4): init > > pmi_version=1 pmi_subversion=1 > > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 > > pmi_subversion=1 rc=0 > > [proxy:0:1@weiser2] got pmi command (from 7): get_appnum > > > > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 > > [proxy:0:1@weiser2] got pmi command (from 4): get_maxes > > > > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 > keylen_max=64 > > vallen_max=1024 > > [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname > > > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:1@weiser2] got pmi command (from 4): get_appnum > > > > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 > > [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname > > > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname > > > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:1@weiser2] got pmi command (from 7): get > > kvsname=kvs_24541_0 key=PMI_process_mapping > > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > > value=(vector,(0,2,4)) > > [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname > > > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:1@weiser2] got pmi command (from 7): barrier_in > > > > [proxy:0:1@weiser2] got pmi command (from 4): get > > kvsname=kvs_24541_0 key=PMI_process_mapping > > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > > value=(vector,(0,2,4)) > > [proxy:0:1@weiser2] got pmi command (from 5): get_maxes > > > > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 > keylen_max=64 > > vallen_max=1024 > > [proxy:0:1@weiser2] got pmi command (from 5): get_appnum > > > > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 > > [proxy:0:1@weiser2] got pmi command (from 4): put > > kvsname=kvs_24541_0 key=sharedFilename[4] > > value=/dev/shm/mpich_shar_tmpuKzlSa > > [proxy:0:1@weiser2] cached command: > > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa > > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname > > > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:1@weiser2] got pmi command (from 4): barrier_in > > > > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put > > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa > > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in > > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=keyval_cache > > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 > > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa > > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=keyval_cache > > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 > > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa > > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=barrier_out > > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=barrier_out > > [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname > > > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:1@weiser2] got pmi command (from 5): get > > kvsname=kvs_24541_0 key=PMI_process_mapping > > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > > value=(vector,(0,2,4)) > > [proxy:0:1@weiser2] got pmi command (from 10): init > > pmi_version=1 pmi_subversion=1 > > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 > > pmi_subversion=1 rc=0 > > [proxy:0:1@weiser2] got pmi command (from 5): barrier_in > > > > [proxy:0:1@weiser2] got pmi command (from 10): get_maxes > > > > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 > keylen_max=64 > > vallen_max=1024 > > [proxy:0:1@weiser2] got pmi command (from 10): get_appnum > > > > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 > > [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname > > > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname > > > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > > [proxy:0:1@weiser2] got pmi command (from 10): get > > kvsname=kvs_24541_0 key=PMI_process_mapping > > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > > value=(vector,(0,2,4)) > > [proxy:0:1@weiser2] got pmi command (from 10): barrier_in > > > > [proxy:0:1@weiser2] flushing 1 put command(s) out > > [proxy:0:1@weiser2] forwarding command (cmd=put > > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa) upstream > > [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream > > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > > [proxy:0:0@weiser1] got pmi command (from 6): get > > kvsname=kvs_24541_0 key=sharedFilename[0] > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=/dev/shm/mpich_shar_tmpnEZdQ9 > > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > > [proxy:0:1@weiser2] got pmi command (from 5): get > > kvsname=kvs_24541_0 key=sharedFilename[4] > > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > > value=/dev/shm/mpich_shar_tmpuKzlSa > > [proxy:0:1@weiser2] got pmi command (from 7): get > > kvsname=kvs_24541_0 key=sharedFilename[4] > > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > > value=/dev/shm/mpich_shar_tmpuKzlSa > > [proxy:0:1@weiser2] got pmi command (from 10): get > > kvsname=kvs_24541_0 key=sharedFilename[4] > > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > > value=/dev/shm/mpich_shar_tmpuKzlSa > > [proxy:0:0@weiser1] got pmi command (from 8): get > > kvsname=kvs_24541_0 key=sharedFilename[0] > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=/dev/shm/mpich_shar_tmpnEZdQ9 > > [proxy:0:0@weiser1] got pmi command (from 15): get > > kvsname=kvs_24541_0 key=sharedFilename[0] > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=/dev/shm/mpich_shar_tmpnEZdQ9 > > [proxy:0:0@weiser1] got pmi command (from 0): put > > kvsname=kvs_24541_0 key=P0-businesscard > > value=description#weiser1$port#56190$ifname#192.168.0.101$ > > [proxy:0:0@weiser1] cached command: > > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:0@weiser1] got pmi command (from 8): put > > kvsname=kvs_24541_0 key=P2-businesscard > > value=description#weiser1$port#40019$ifname#192.168.0.101$ > > [proxy:0:0@weiser1] cached command: > > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:0@weiser1] got pmi command (from 15): put > > kvsname=kvs_24541_0 key=P3-businesscard > > value=description#weiser1$port#57150$ifname#192.168.0.101$ > > [proxy:0:0@weiser1] cached command: > > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:0@weiser1] got pmi command (from 0): barrier_in > > > > [proxy:0:0@weiser1] got pmi command (from 6): put > > kvsname=kvs_24541_0 key=P1-businesscard > > value=description#weiser1$port#34048$ifname#192.168.0.101$ > > [proxy:0:0@weiser1] cached command: > > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ > > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:0@weiser1] got pmi command (from 8): barrier_in > > > > [proxy:0:0@weiser1] got pmi command (from 6): barrier_in > > > > [proxy:0:0@weiser1] got pmi command (from 15): barrier_in > > > > [proxy:0:0@weiser1] flushing 4 put command(s) out > > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put > > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ > > [proxy:0:0@weiser1] forwarding command (cmd=put > > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$) > > upstream > > [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream > > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in > > [proxy:0:1@weiser2] got pmi command (from 4): put > > kvsname=kvs_24541_0 key=P4-businesscard > > value=description#weiser2$port#60693$ifname#192.168.0.102$ > > [proxy:0:1@weiser2] cached command: > > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:1@weiser2] got pmi command (from 5): put > > kvsname=kvs_24541_0 key=P5-businesscard > > value=description#weiser2$port#49938$ifname#192.168.0.102$ > > [proxy:0:1@weiser2] cached command: > > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:1@weiser2] got pmi command (from 7): put > > kvsname=kvs_24541_0 key=P6-businesscard > > value=description#weiser2$port#33516$ifname#192.168.0.102$ > > [proxy:0:1@weiser2] cached command: > > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:1@weiser2] got pmi command (from 10): put > > kvsname=kvs_24541_0 key=P7-businesscard > > value=description#weiser2$port#43116$ifname#192.168.0.102$ > > [proxy:0:1@weiser2] cached command: > > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ > > [proxy:0:1@weiser2] [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put > > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ > > PMI response: cmd=put_result rc=0 msg=success > > [proxy:0:1@weiser2] got pmi command (from 4): barrier_in > > > > [proxy:0:1@weiser2] got pmi command (from 5): barrier_in > > > > [proxy:0:1@weiser2] got pmi command (from 7): barrier_in > > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in > > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=keyval_cache > > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ > > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ > > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=keyval_cache > > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ > > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ > > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=barrier_out > > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=barrier_out > > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > > [proxy:0:0@weiser1] > > [proxy:0:1@weiser2] got pmi command (from 10): barrier_in > > > > [proxy:0:1@weiser2] flushing 4 put command(s) out > > [proxy:0:1@weiser2] forwarding command (cmd=put > > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$) > > upstream > > [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream > > PMI response: cmd=barrier_out > > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > > [proxy:0:1@weiser2] got pmi command (from 4): get > > kvsname=kvs_24541_0 key=P0-businesscard > > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > > value=description#weiser1$port#56190$ifname#192.168.0.101$ > > > ================================================================================ > > HPLinpack 2.1 -- High-Performance Linpack benchmark -- October 26, > 2012 > > Written by A. Petitet and R. Clint Whaley, Innovative Computing > Laboratory, > > UTK > > Modified by Piotr Luszczek, Innovative Computing Laboratory, UTK > > Modified by Julien Langou, University of Colorado Denver > > > ================================================================================ > > > > An explanation of the input/output parameters follows: > > T/V : Wall time / encoded variant. > > N : The order of the coefficient matrix A. > > NB : The partitioning blocking factor. > > P : The number of process rows. > > Q : The number of process columns. > > Time : Time in seconds to solve the linear system. > > Gflops : Rate of execution for solving the linear system. > > > > The following parameter values will be used: > > > > N : 14616 > > NB : 168 > > PMAP : Row-major process mapping > > P : 2 > > Q : 4 > > PFACT : Right > > NBMIN : 4 > > NDIV : 2 > > RFACT : Crout > > BCAST : 1ringM > > DEPTH : 1 > > SWAP : Mix (threshold = 64) > > L1 : transposed form > > U : transposed form > > EQUIL : yes > > ALIGN : 8 double precision words > > > > > -------------------------------------------------------------------------------- > > > > - The matrix A is randomly generated for each test. > > - The following scaled residual check will be computed: > > ||Ax-b||_oo / ( eps * ( || x ||_oo * || A ||_oo + || b ||_oo ) * N > ) > > - The relative machine precision (eps) is taken to be > > 1.110223e-16 > > [proxy:0:0@weiser1] got pmi command (from 6): get > > - Computational tests pass if scaled residuals are less than > > 16.0 > > > > kvsname=kvs_24541_0 key=P5-businesscard > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=description#weiser2$port#49938$ifname#192.168.0.102$ > > [proxy:0:0@weiser1] got pmi command (from 15): get > > kvsname=kvs_24541_0 key=P7-businesscard > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=description#weiser2$port#43116$ifname#192.168.0.102$ > > [proxy:0:0@weiser1] got pmi command (from 8): get > > kvsname=kvs_24541_0 key=P6-businesscard > > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > > value=description#weiser2$port#33516$ifname#192.168.0.102$ > > [proxy:0:1@weiser2] got pmi command (from 5): get > > kvsname=kvs_24541_0 key=P1-businesscard > > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > > value=description#weiser1$port#34048$ifname#192.168.0.101$ > > > > > =================================================================================== > > = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES > > = EXIT CODE: 9 > > = CLEANING UP REMAINING PROCESSES > > = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES > > > =================================================================================== > > > > > > ----------- END -------------- > > > > if that can help :( > > > > > > > > > > > > > > On Fri, Jun 28, 2013 at 12:24 PM, Pavan Balaji <balaji(a)mcs.anl.gov> > wrote: > >> > >> > >> Looks like your application aborted for some reason. > >> > >> -- Pavan > >> > >> > >> On 06/27/2013 10:21 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > >>> > >>> My bad, I just found out that there was a duplicate entry like: > >>> weiser1 127.0.1.1 > >>> weiser1 192.168.0.101 > >>> so i removed teh 127.x.x.x. entry and kept the hostfile contents > similar > >>> on both nodes. Now previous error is reduced to this one: > >>> > >>> ------ START OF OUTPUT ------- > >>> > >>> ....some HPL startup string (no final result) > >>> ...skip..... > >>> > >>> > >>> > =================================================================================== > >>> = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES > >>> = EXIT CODE: 9 > >>> = CLEANING UP REMAINING PROCESSES > >>> = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES > >>> > >>> > =================================================================================== > >>> [proxy:0:0@weiser1] HYD_pmcd_pmip_control_cmd_cb > >>> (./pm/pmiserv/pmip_cb.c:886): assert (!closed) failed > >>> [proxy:0:0@weiser1] HYDT_dmxu_poll_wait_for_event > >>> (./tools/demux/demux_poll.c:77): callback returned error status > >>> [proxy:0:0@weiser1] main (./pm/pmiserv/pmip.c:206): demux engine error > >>> waiting for event > >>> [mpiexec@weiser1] HYDT_bscu_wait_for_completion > >>> (./tools/bootstrap/utils/bscu_wait.c:76): one of the processes > >>> terminated badly; aborting > >>> [mpiexec@weiser1] HYDT_bsci_wait_for_completion > >>> (./tools/bootstrap/src/bsci_wait.c:23): launcher returned error waiting > >>> for completion > >>> [mpiexec@weiser1] HYD_pmci_wait_for_completion > >>> (./pm/pmiserv/pmiserv_pmci.c:217): launcher returned error waiting for > >>> completion > >>> [mpiexec@weiser1] main (./ui/mpich/mpiexec.c:331): process manager > error > >>> waiting for completion > >>> > >>> ------ END OF OUTPUT ------- > >>> > >>> > >>> > >>> On Fri, Jun 28, 2013 at 12:12 PM, Pavan Balaji <balaji(a)mcs.anl.gov > >>> <mailto:[email protected]>> wrote: > >>> > >>> > >>> On 06/27/2013 10:08 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > >>> > >>> > >>> > P4-businesscard=description#__weiser2$port#57651$ifname#192.__168.0.102$ > >>> > >>> > P5-businesscard=description#__weiser2$port#52622$ifname#192.__168.0.102$ > >>> > >>> > P6-businesscard=description#__weiser2$port#55935$ifname#192.__168.0.102$ > >>> > >>> > P7-businesscard=description#__weiser2$port#54952$ifname#192.__168.0.102$ > >>> > >>> P0-businesscard=description#__weiser1$port#41958$ifname#127.__0.1.1$ > >>> > >>> P2-businesscard=description#__weiser1$port#35049$ifname#127.__0.1.1$ > >>> > >>> P1-businesscard=description#__weiser1$port#39634$ifname#127.__0.1.1$ > >>> > >>> P3-businesscard=description#__weiser1$port#51802$ifname#127.__0.1.1$ > >>> > >>> > >>> > >>> I have two concerns with your output. Let's start with the first. > >>> > >>> Did you look at this question on the FAQ page? > >>> > >>> "Is your /etc/hosts file consistent across all nodes? Unless you > are > >>> using an external DNS server, the /etc/hosts file on every machine > >>> should contain the correct IP information about all hosts in the > >>> system." > >>> > >>> > >>> -- Pavan > >>> > >>> -- > >>> Pavan Balaji > >>> http://www.mcs.anl.gov/~balaji > >>> > >>> > >> > >> -- > >> Pavan Balaji > >> http://www.mcs.anl.gov/~balaji > > > > > > > > _______________________________________________ > > discuss mailing list discuss(a)mpich.org > > To manage subscription options or unsubscribe: > > https://lists.mpich.org/mailman/listinfo/discuss > > > > -- > Jeff Hammond > jeff.science(a)gmail.com > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss >

1 0

Re: [mpich-discuss] mpich hangs
by Jeff Hammond 27 Jun '13

27 Jun '13

Can you run the cpi program? If that doesn't run, something is wrong, because that program is trivial and correct. Jeff On Thu, Jun 27, 2013 at 10:29 PM, Syed. Jahanzeb Maqbool Hashmi <jahanzeb.maqbool(a)gmail.com> wrote: > again that same error: > Fatal error in PMPI_Wait: A process has failed, error stack: > PMPI_Wait(180)............: MPI_Wait(request=0xbebb9a1c, status=0xbebb99f0) > failed > MPIR_Wait_impl(77)........: > dequeue_and_set_error(888): Communication error with rank 4 > > here is the verbose output: > > --------------START------------------ > > host: weiser1 > host: weiser2 > > ================================================================================================== > mpiexec options: > ---------------- > Base path: /mnt/nfs/install/mpich-install/bin/ > Launcher: (null) > Debug level: 1 > Enable X: -1 > > Global environment: > ------------------- > TERM=xterm > SHELL=/bin/bash > > XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422 > SSH_CLIENT=192.168.0.3 57311 22 > OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1 > SSH_TTY=/dev/pts/0 > USER=linaro > > LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36: > LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib > MAIL=/var/mail/linaro > > PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin > PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a > LANG=C.UTF-8 > SHLVL=1 > HOME=/home/linaro > LOGNAME=linaro > SSH_CONNECTION=192.168.0.3 57311 192.168.0.101 22 > LESSOPEN=| /usr/bin/lesspipe %s > LESSCLOSE=/usr/bin/lesspipe %s %s > _=/mnt/nfs/install/mpich-install/bin/mpiexec > > Hydra internal environment: > --------------------------- > GFORTRAN_UNBUFFERED_PRECONNECTED=y > > > Proxy information: > ********************* > [1] proxy: weiser1 (4 cores) > Exec list: ./xhpl (4 processes); > > [2] proxy: weiser2 (4 cores) > Exec list: ./xhpl (4 processes); > > > ================================================================================================== > > [mpiexec@weiser1] Timeout set to -1 (-1 means infinite) > [mpiexec@weiser1] Got a control port string of weiser1:45851 > > Proxy launch args: /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy > --control-port weiser1:45851 --debug --rmk user --launcher ssh --demux poll > --pgid 0 --retries 10 --usize -2 --proxy-id > > Arguments being passed to proxy 0: > --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname > weiser1 --global-core-map 0,4,8 --pmi-id-map 0,0 --global-process-count 8 > --auto-cleanup 1 --pmi-kvsname kvs_24541_0 --pmi-process-mapping > (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' > 'SHELL=/bin/bash' > 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' > 'SSH_CLIENT=192.168.0.3 57311 22' > 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' > 'USER=linaro' > 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' > 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' > 'MAIL=/var/mail/linaro' > 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' > 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' > 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' 'SSH_CONNECTION=192.168.0.3 > 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' > 'LESSCLOSE=/usr/bin/lesspipe %s %s' > '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 > --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' > --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 > --exec-local-env 0 --exec-wdir > /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl > > Arguments being passed to proxy 1: > --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname > weiser2 --global-core-map 0,4,8 --pmi-id-map 0,4 --global-process-count 8 > --auto-cleanup 1 --pmi-kvsname kvs_24541_0 --pmi-process-mapping > (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' > 'SHELL=/bin/bash' > 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' > 'SSH_CLIENT=192.168.0.3 57311 22' > 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' > 'USER=linaro' > 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' > 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' > 'MAIL=/var/mail/linaro' > 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' > 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' > 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' 'SSH_CONNECTION=192.168.0.3 > 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' > 'LESSCLOSE=/usr/bin/lesspipe %s %s' > '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 > --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' > --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 > --exec-local-env 0 --exec-wdir > /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl > > [mpiexec@weiser1] Launch arguments: > /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy --control-port > weiser1:45851 --debug --rmk user --launcher ssh --demux poll --pgid 0 > --retries 10 --usize -2 --proxy-id 0 > [mpiexec@weiser1] Launch arguments: /usr/bin/ssh -x weiser2 > "/mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy" --control-port > weiser1:45851 --debug --rmk user --launcher ssh --demux poll --pgid 0 > --retries 10 --usize -2 --proxy-id 1 > [proxy:0:0@weiser1] got pmi command (from 0): init > pmi_version=1 pmi_subversion=1 > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 > pmi_subversion=1 rc=0 > [proxy:0:0@weiser1] got pmi command (from 0): get_maxes > > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 > vallen_max=1024 > [proxy:0:0@weiser1] got pmi command (from 15): init > pmi_version=1 pmi_subversion=1 > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 > pmi_subversion=1 rc=0 > [proxy:0:0@weiser1] got pmi command (from 15): get_maxes > > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 > vallen_max=1024 > [proxy:0:0@weiser1] got pmi command (from 8): init > pmi_version=1 pmi_subversion=1 > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 > pmi_subversion=1 rc=0 > [proxy:0:0@weiser1] got pmi command (from 0): get_appnum > > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 > [proxy:0:0@weiser1] got pmi command (from 15): get_appnum > > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 > [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:0@weiser1] got pmi command (from 8): get_maxes > > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 > vallen_max=1024 > [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:0@weiser1] got pmi command (from 6): init > pmi_version=1 pmi_subversion=1 > [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 > pmi_subversion=1 rc=0 > [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:0@weiser1] got pmi command (from 0): get > kvsname=kvs_24541_0 key=PMI_process_mapping > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=(vector,(0,2,4)) > [proxy:0:0@weiser1] got pmi command (from 8): get_appnum > > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 > [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:0@weiser1] got pmi command (from 0): put > kvsname=kvs_24541_0 key=sharedFilename[0] > value=/dev/shm/mpich_shar_tmpnEZdQ9 > [proxy:0:0@weiser1] cached command: > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > [proxy:0:0@weiser1] got pmi command (from 15): get > kvsname=kvs_24541_0 key=PMI_process_mapping > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=(vector,(0,2,4)) > [proxy:0:0@weiser1] got pmi command (from 0): barrier_in > > [proxy:0:0@weiser1] got pmi command (from 6): get_maxes > > [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 > vallen_max=1024 > [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:0@weiser1] got pmi command (from 15): barrier_in > > [proxy:0:0@weiser1] got pmi command (from 8): get > kvsname=kvs_24541_0 key=PMI_process_mapping > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=(vector,(0,2,4)) > [proxy:0:0@weiser1] got pmi command (from 6): get_appnum > > [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 > [proxy:0:0@weiser1] got pmi command (from 8): barrier_in > > [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname > > [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:0@weiser1] got pmi command (from 6): get > kvsname=kvs_24541_0 key=PMI_process_mapping > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=(vector,(0,2,4)) > [proxy:0:0@weiser1] got pmi command (from 6): barrier_in > > [proxy:0:0@weiser1] flushing 1 put command(s) out > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 > [proxy:0:0@weiser1] forwarding command (cmd=put > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9) upstream > [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in > [proxy:0:1@weiser2] got pmi command (from 7): init > pmi_version=1 pmi_subversion=1 > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 > pmi_subversion=1 rc=0 > [proxy:0:1@weiser2] got pmi command (from 5): init > pmi_version=1 pmi_subversion=1 > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 > pmi_subversion=1 rc=0 > [proxy:0:1@weiser2] got pmi command (from 7): get_maxes > > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 > vallen_max=1024 > [proxy:0:1@weiser2] got pmi command (from 4): init > pmi_version=1 pmi_subversion=1 > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 > pmi_subversion=1 rc=0 > [proxy:0:1@weiser2] got pmi command (from 7): get_appnum > > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 > [proxy:0:1@weiser2] got pmi command (from 4): get_maxes > > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 > vallen_max=1024 > [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:1@weiser2] got pmi command (from 4): get_appnum > > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 > [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:1@weiser2] got pmi command (from 7): get > kvsname=kvs_24541_0 key=PMI_process_mapping > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > value=(vector,(0,2,4)) > [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:1@weiser2] got pmi command (from 7): barrier_in > > [proxy:0:1@weiser2] got pmi command (from 4): get > kvsname=kvs_24541_0 key=PMI_process_mapping > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > value=(vector,(0,2,4)) > [proxy:0:1@weiser2] got pmi command (from 5): get_maxes > > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 > vallen_max=1024 > [proxy:0:1@weiser2] got pmi command (from 5): get_appnum > > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 > [proxy:0:1@weiser2] got pmi command (from 4): put > kvsname=kvs_24541_0 key=sharedFilename[4] > value=/dev/shm/mpich_shar_tmpuKzlSa > [proxy:0:1@weiser2] cached command: > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success > [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:1@weiser2] got pmi command (from 4): barrier_in > > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=keyval_cache > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=keyval_cache > sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=barrier_out > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=barrier_out > [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:1@weiser2] got pmi command (from 5): get > kvsname=kvs_24541_0 key=PMI_process_mapping > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > value=(vector,(0,2,4)) > [proxy:0:1@weiser2] got pmi command (from 10): init > pmi_version=1 pmi_subversion=1 > [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 > pmi_subversion=1 rc=0 > [proxy:0:1@weiser2] got pmi command (from 5): barrier_in > > [proxy:0:1@weiser2] got pmi command (from 10): get_maxes > > [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 > vallen_max=1024 > [proxy:0:1@weiser2] got pmi command (from 10): get_appnum > > [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 > [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname > > [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 > [proxy:0:1@weiser2] got pmi command (from 10): get > kvsname=kvs_24541_0 key=PMI_process_mapping > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > value=(vector,(0,2,4)) > [proxy:0:1@weiser2] got pmi command (from 10): barrier_in > > [proxy:0:1@weiser2] flushing 1 put command(s) out > [proxy:0:1@weiser2] forwarding command (cmd=put > sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa) upstream > [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > [proxy:0:0@weiser1] got pmi command (from 6): get > kvsname=kvs_24541_0 key=sharedFilename[0] > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=/dev/shm/mpich_shar_tmpnEZdQ9 > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > [proxy:0:1@weiser2] got pmi command (from 5): get > kvsname=kvs_24541_0 key=sharedFilename[4] > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > value=/dev/shm/mpich_shar_tmpuKzlSa > [proxy:0:1@weiser2] got pmi command (from 7): get > kvsname=kvs_24541_0 key=sharedFilename[4] > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > value=/dev/shm/mpich_shar_tmpuKzlSa > [proxy:0:1@weiser2] got pmi command (from 10): get > kvsname=kvs_24541_0 key=sharedFilename[4] > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > value=/dev/shm/mpich_shar_tmpuKzlSa > [proxy:0:0@weiser1] got pmi command (from 8): get > kvsname=kvs_24541_0 key=sharedFilename[0] > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=/dev/shm/mpich_shar_tmpnEZdQ9 > [proxy:0:0@weiser1] got pmi command (from 15): get > kvsname=kvs_24541_0 key=sharedFilename[0] > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=/dev/shm/mpich_shar_tmpnEZdQ9 > [proxy:0:0@weiser1] got pmi command (from 0): put > kvsname=kvs_24541_0 key=P0-businesscard > value=description#weiser1$port#56190$ifname#192.168.0.101$ > [proxy:0:0@weiser1] cached command: > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > [proxy:0:0@weiser1] got pmi command (from 8): put > kvsname=kvs_24541_0 key=P2-businesscard > value=description#weiser1$port#40019$ifname#192.168.0.101$ > [proxy:0:0@weiser1] cached command: > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > [proxy:0:0@weiser1] got pmi command (from 15): put > kvsname=kvs_24541_0 key=P3-businesscard > value=description#weiser1$port#57150$ifname#192.168.0.101$ > [proxy:0:0@weiser1] cached command: > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > [proxy:0:0@weiser1] got pmi command (from 0): barrier_in > > [proxy:0:0@weiser1] got pmi command (from 6): put > kvsname=kvs_24541_0 key=P1-businesscard > value=description#weiser1$port#34048$ifname#192.168.0.101$ > [proxy:0:0@weiser1] cached command: > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ > [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success > [proxy:0:0@weiser1] got pmi command (from 8): barrier_in > > [proxy:0:0@weiser1] got pmi command (from 6): barrier_in > > [proxy:0:0@weiser1] got pmi command (from 15): barrier_in > > [proxy:0:0@weiser1] flushing 4 put command(s) out > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ > [proxy:0:0@weiser1] forwarding command (cmd=put > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$) > upstream > [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in > [proxy:0:1@weiser2] got pmi command (from 4): put > kvsname=kvs_24541_0 key=P4-businesscard > value=description#weiser2$port#60693$ifname#192.168.0.102$ > [proxy:0:1@weiser2] cached command: > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success > [proxy:0:1@weiser2] got pmi command (from 5): put > kvsname=kvs_24541_0 key=P5-businesscard > value=description#weiser2$port#49938$ifname#192.168.0.102$ > [proxy:0:1@weiser2] cached command: > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success > [proxy:0:1@weiser2] got pmi command (from 7): put > kvsname=kvs_24541_0 key=P6-businesscard > value=description#weiser2$port#33516$ifname#192.168.0.102$ > [proxy:0:1@weiser2] cached command: > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success > [proxy:0:1@weiser2] got pmi command (from 10): put > kvsname=kvs_24541_0 key=P7-businesscard > value=description#weiser2$port#43116$ifname#192.168.0.102$ > [proxy:0:1@weiser2] cached command: > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ > [proxy:0:1@weiser2] [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ > PMI response: cmd=put_result rc=0 msg=success > [proxy:0:1@weiser2] got pmi command (from 4): barrier_in > > [proxy:0:1@weiser2] got pmi command (from 5): barrier_in > > [proxy:0:1@weiser2] got pmi command (from 7): barrier_in > [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=keyval_cache > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=keyval_cache > P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ > P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ > P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ > P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ > [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=barrier_out > [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=barrier_out > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > [proxy:0:0@weiser1] > [proxy:0:1@weiser2] got pmi command (from 10): barrier_in > > [proxy:0:1@weiser2] flushing 4 put command(s) out > [proxy:0:1@weiser2] forwarding command (cmd=put > P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ > P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ > P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ > P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$) > upstream > [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream > PMI response: cmd=barrier_out > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > [proxy:0:0@weiser1] PMI response: cmd=barrier_out > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > [proxy:0:1@weiser2] PMI response: cmd=barrier_out > [proxy:0:1@weiser2] got pmi command (from 4): get > kvsname=kvs_24541_0 key=P0-businesscard > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > value=description#weiser1$port#56190$ifname#192.168.0.101$ > ================================================================================ > HPLinpack 2.1 -- High-Performance Linpack benchmark -- October 26, 2012 > Written by A. Petitet and R. Clint Whaley, Innovative Computing Laboratory, > UTK > Modified by Piotr Luszczek, Innovative Computing Laboratory, UTK > Modified by Julien Langou, University of Colorado Denver > ================================================================================ > > An explanation of the input/output parameters follows: > T/V : Wall time / encoded variant. > N : The order of the coefficient matrix A. > NB : The partitioning blocking factor. > P : The number of process rows. > Q : The number of process columns. > Time : Time in seconds to solve the linear system. > Gflops : Rate of execution for solving the linear system. > > The following parameter values will be used: > > N : 14616 > NB : 168 > PMAP : Row-major process mapping > P : 2 > Q : 4 > PFACT : Right > NBMIN : 4 > NDIV : 2 > RFACT : Crout > BCAST : 1ringM > DEPTH : 1 > SWAP : Mix (threshold = 64) > L1 : transposed form > U : transposed form > EQUIL : yes > ALIGN : 8 double precision words > > -------------------------------------------------------------------------------- > > - The matrix A is randomly generated for each test. > - The following scaled residual check will be computed: > ||Ax-b||_oo / ( eps * ( || x ||_oo * || A ||_oo + || b ||_oo ) * N ) > - The relative machine precision (eps) is taken to be > 1.110223e-16 > [proxy:0:0@weiser1] got pmi command (from 6): get > - Computational tests pass if scaled residuals are less than > 16.0 > > kvsname=kvs_24541_0 key=P5-businesscard > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=description#weiser2$port#49938$ifname#192.168.0.102$ > [proxy:0:0@weiser1] got pmi command (from 15): get > kvsname=kvs_24541_0 key=P7-businesscard > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=description#weiser2$port#43116$ifname#192.168.0.102$ > [proxy:0:0@weiser1] got pmi command (from 8): get > kvsname=kvs_24541_0 key=P6-businesscard > [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success > value=description#weiser2$port#33516$ifname#192.168.0.102$ > [proxy:0:1@weiser2] got pmi command (from 5): get > kvsname=kvs_24541_0 key=P1-businesscard > [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success > value=description#weiser1$port#34048$ifname#192.168.0.101$ > > =================================================================================== > = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES > = EXIT CODE: 9 > = CLEANING UP REMAINING PROCESSES > = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES > =================================================================================== > > > ----------- END -------------- > > if that can help :( > > > > > > > On Fri, Jun 28, 2013 at 12:24 PM, Pavan Balaji <balaji(a)mcs.anl.gov> wrote: >> >> >> Looks like your application aborted for some reason. >> >> -- Pavan >> >> >> On 06/27/2013 10:21 PM, Syed. Jahanzeb Maqbool Hashmi wrote: >>> >>> My bad, I just found out that there was a duplicate entry like: >>> weiser1 127.0.1.1 >>> weiser1 192.168.0.101 >>> so i removed teh 127.x.x.x. entry and kept the hostfile contents similar >>> on both nodes. Now previous error is reduced to this one: >>> >>> ------ START OF OUTPUT ------- >>> >>> ....some HPL startup string (no final result) >>> ...skip..... >>> >>> >>> =================================================================================== >>> = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES >>> = EXIT CODE: 9 >>> = CLEANING UP REMAINING PROCESSES >>> = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES >>> >>> =================================================================================== >>> [proxy:0:0@weiser1] HYD_pmcd_pmip_control_cmd_cb >>> (./pm/pmiserv/pmip_cb.c:886): assert (!closed) failed >>> [proxy:0:0@weiser1] HYDT_dmxu_poll_wait_for_event >>> (./tools/demux/demux_poll.c:77): callback returned error status >>> [proxy:0:0@weiser1] main (./pm/pmiserv/pmip.c:206): demux engine error >>> waiting for event >>> [mpiexec@weiser1] HYDT_bscu_wait_for_completion >>> (./tools/bootstrap/utils/bscu_wait.c:76): one of the processes >>> terminated badly; aborting >>> [mpiexec@weiser1] HYDT_bsci_wait_for_completion >>> (./tools/bootstrap/src/bsci_wait.c:23): launcher returned error waiting >>> for completion >>> [mpiexec@weiser1] HYD_pmci_wait_for_completion >>> (./pm/pmiserv/pmiserv_pmci.c:217): launcher returned error waiting for >>> completion >>> [mpiexec@weiser1] main (./ui/mpich/mpiexec.c:331): process manager error >>> waiting for completion >>> >>> ------ END OF OUTPUT ------- >>> >>> >>> >>> On Fri, Jun 28, 2013 at 12:12 PM, Pavan Balaji <balaji(a)mcs.anl.gov >>> <mailto:[email protected]>> wrote: >>> >>> >>> On 06/27/2013 10:08 PM, Syed. Jahanzeb Maqbool Hashmi wrote: >>> >>> >>> P4-businesscard=description#__weiser2$port#57651$ifname#192.__168.0.102$ >>> >>> P5-businesscard=description#__weiser2$port#52622$ifname#192.__168.0.102$ >>> >>> P6-businesscard=description#__weiser2$port#55935$ifname#192.__168.0.102$ >>> >>> P7-businesscard=description#__weiser2$port#54952$ifname#192.__168.0.102$ >>> >>> P0-businesscard=description#__weiser1$port#41958$ifname#127.__0.1.1$ >>> >>> P2-businesscard=description#__weiser1$port#35049$ifname#127.__0.1.1$ >>> >>> P1-businesscard=description#__weiser1$port#39634$ifname#127.__0.1.1$ >>> >>> P3-businesscard=description#__weiser1$port#51802$ifname#127.__0.1.1$ >>> >>> >>> >>> I have two concerns with your output. Let's start with the first. >>> >>> Did you look at this question on the FAQ page? >>> >>> "Is your /etc/hosts file consistent across all nodes? Unless you are >>> using an external DNS server, the /etc/hosts file on every machine >>> should contain the correct IP information about all hosts in the >>> system." >>> >>> >>> -- Pavan >>> >>> -- >>> Pavan Balaji >>> http://www.mcs.anl.gov/~balaji >>> >>> >> >> -- >> Pavan Balaji >> http://www.mcs.anl.gov/~balaji > > > > _______________________________________________ > discuss mailing list discuss(a)mpich.org > To manage subscription options or unsubscribe: > https://lists.mpich.org/mailman/listinfo/discuss -- Jeff Hammond jeff.science(a)gmail.com

1 0

Re: [mpich-discuss] mpich hangs
by Syed. Jahanzeb Maqbool Hashmi 27 Jun '13

27 Jun '13

again that same error: Fatal error in PMPI_Wait: A process has failed, error stack: PMPI_Wait(180)............: MPI_Wait(request=0xbebb9a1c, status=0xbebb99f0) failed MPIR_Wait_impl(77)........: dequeue_and_set_error(888): Communication error with rank 4 here is the verbose output: --------------START------------------ host: weiser1 host: weiser2 ================================================================================================== mpiexec options: ---------------- Base path: /mnt/nfs/install/mpich-install/bin/ Launcher: (null) Debug level: 1 Enable X: -1 Global environment: ------------------- TERM=xterm SHELL=/bin/bash XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422 SSH_CLIENT=192.168.0.3 57311 22 OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1 SSH_TTY=/dev/pts/0 USER=linaro LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36: LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib MAIL=/var/mail/linaro PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a LANG=C.UTF-8 SHLVL=1 HOME=/home/linaro LOGNAME=linaro SSH_CONNECTION=192.168.0.3 57311 192.168.0.101 22 LESSOPEN=| /usr/bin/lesspipe %s LESSCLOSE=/usr/bin/lesspipe %s %s _=/mnt/nfs/install/mpich-install/bin/mpiexec Hydra internal environment: --------------------------- GFORTRAN_UNBUFFERED_PRECONNECTED=y Proxy information: ********************* [1] proxy: weiser1 (4 cores) Exec list: ./xhpl (4 processes); [2] proxy: weiser2 (4 cores) Exec list: ./xhpl (4 processes); ================================================================================================== [mpiexec@weiser1] Timeout set to -1 (-1 means infinite) [mpiexec@weiser1] Got a control port string of weiser1:45851 Proxy launch args: /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy --control-port weiser1:45851 --debug --rmk user --launcher ssh --demux poll --pgid 0 --retries 10 --usize -2 --proxy-id Arguments being passed to proxy 0: --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname weiser1 --global-core-map 0,4,8 --pmi-id-map 0,0 --global-process-count 8 --auto-cleanup 1 --pmi-kvsname kvs_24541_0 --pmi-process-mapping (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' 'SHELL=/bin/bash' 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' 'SSH_CLIENT=192.168.0.3 57311 22' 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' 'USER=linaro' 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' 'MAIL=/var/mail/linaro' 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' 'SSH_CONNECTION=192.168.0.3 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' 'LESSCLOSE=/usr/bin/lesspipe %s %s' '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 --exec-local-env 0 --exec-wdir /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl Arguments being passed to proxy 1: --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname weiser2 --global-core-map 0,4,8 --pmi-id-map 0,4 --global-process-count 8 --auto-cleanup 1 --pmi-kvsname kvs_24541_0 --pmi-process-mapping (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' 'SHELL=/bin/bash' 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' 'SSH_CLIENT=192.168.0.3 57311 22' 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' 'USER=linaro' 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' 'MAIL=/var/mail/linaro' 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' 'SSH_CONNECTION=192.168.0.3 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' 'LESSCLOSE=/usr/bin/lesspipe %s %s' '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 --exec-local-env 0 --exec-wdir /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl [mpiexec@weiser1] Launch arguments: /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy --control-port weiser1:45851 --debug --rmk user --launcher ssh --demux poll --pgid 0 --retries 10 --usize -2 --proxy-id 0 [mpiexec@weiser1] Launch arguments: /usr/bin/ssh -x weiser2 "/mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy" --control-port weiser1:45851 --debug --rmk user --launcher ssh --demux poll --pgid 0 --retries 10 --usize -2 --proxy-id 1 [proxy:0:0@weiser1] got pmi command (from 0): init pmi_version=1 pmi_subversion=1 [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:0@weiser1] got pmi command (from 0): get_maxes [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:0@weiser1] got pmi command (from 15): init pmi_version=1 pmi_subversion=1 [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:0@weiser1] got pmi command (from 15): get_maxes [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:0@weiser1] got pmi command (from 8): init pmi_version=1 pmi_subversion=1 [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:0@weiser1] got pmi command (from 0): get_appnum [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 [proxy:0:0@weiser1] got pmi command (from 15): get_appnum [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:0@weiser1] got pmi command (from 8): get_maxes [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:0@weiser1] got pmi command (from 6): init pmi_version=1 pmi_subversion=1 [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:0@weiser1] got pmi command (from 0): get kvsname=kvs_24541_0 key=PMI_process_mapping [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:0@weiser1] got pmi command (from 8): get_appnum [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:0@weiser1] got pmi command (from 0): put kvsname=kvs_24541_0 key=sharedFilename[0] value=/dev/shm/mpich_shar_tmpnEZdQ9 [proxy:0:0@weiser1] cached command: sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 15): get kvsname=kvs_24541_0 key=PMI_process_mapping [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:0@weiser1] got pmi command (from 0): barrier_in [proxy:0:0@weiser1] got pmi command (from 6): get_maxes [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:0@weiser1] got pmi command (from 15): barrier_in [proxy:0:0@weiser1] got pmi command (from 8): get kvsname=kvs_24541_0 key=PMI_process_mapping [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:0@weiser1] got pmi command (from 6): get_appnum [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 [proxy:0:0@weiser1] got pmi command (from 8): barrier_in [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:0@weiser1] got pmi command (from 6): get kvsname=kvs_24541_0 key=PMI_process_mapping [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:0@weiser1] got pmi command (from 6): barrier_in [proxy:0:0@weiser1] flushing 1 put command(s) out [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 [proxy:0:0@weiser1] forwarding command (cmd=put sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9) upstream [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in [proxy:0:1@weiser2] got pmi command (from 7): init pmi_version=1 pmi_subversion=1 [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:1@weiser2] got pmi command (from 5): init pmi_version=1 pmi_subversion=1 [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:1@weiser2] got pmi command (from 7): get_maxes [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:1@weiser2] got pmi command (from 4): init pmi_version=1 pmi_subversion=1 [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:1@weiser2] got pmi command (from 7): get_appnum [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 [proxy:0:1@weiser2] got pmi command (from 4): get_maxes [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:1@weiser2] got pmi command (from 4): get_appnum [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:1@weiser2] got pmi command (from 7): get kvsname=kvs_24541_0 key=PMI_process_mapping [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:1@weiser2] got pmi command (from 7): barrier_in [proxy:0:1@weiser2] got pmi command (from 4): get kvsname=kvs_24541_0 key=PMI_process_mapping [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:1@weiser2] got pmi command (from 5): get_maxes [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:1@weiser2] got pmi command (from 5): get_appnum [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 [proxy:0:1@weiser2] got pmi command (from 4): put kvsname=kvs_24541_0 key=sharedFilename[4] value=/dev/shm/mpich_shar_tmpuKzlSa [proxy:0:1@weiser2] cached command: sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:1@weiser2] got pmi command (from 4): barrier_in [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=keyval_cache sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=keyval_cache sharedFilename[0]=/dev/shm/mpich_shar_tmpnEZdQ9 sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=barrier_out [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=barrier_out [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:1@weiser2] got pmi command (from 5): get kvsname=kvs_24541_0 key=PMI_process_mapping [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:1@weiser2] got pmi command (from 10): init pmi_version=1 pmi_subversion=1 [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:1@weiser2] got pmi command (from 5): barrier_in [proxy:0:1@weiser2] got pmi command (from 10): get_maxes [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:1@weiser2] got pmi command (from 10): get_appnum [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_24541_0 [proxy:0:1@weiser2] got pmi command (from 10): get kvsname=kvs_24541_0 key=PMI_process_mapping [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:1@weiser2] got pmi command (from 10): barrier_in [proxy:0:1@weiser2] flushing 1 put command(s) out [proxy:0:1@weiser2] forwarding command (cmd=put sharedFilename[4]=/dev/shm/mpich_shar_tmpuKzlSa) upstream [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] got pmi command (from 6): get kvsname=kvs_24541_0 key=sharedFilename[0] [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpnEZdQ9 [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] got pmi command (from 5): get kvsname=kvs_24541_0 key=sharedFilename[4] [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpuKzlSa [proxy:0:1@weiser2] got pmi command (from 7): get kvsname=kvs_24541_0 key=sharedFilename[4] [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpuKzlSa [proxy:0:1@weiser2] got pmi command (from 10): get kvsname=kvs_24541_0 key=sharedFilename[4] [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpuKzlSa [proxy:0:0@weiser1] got pmi command (from 8): get kvsname=kvs_24541_0 key=sharedFilename[0] [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpnEZdQ9 [proxy:0:0@weiser1] got pmi command (from 15): get kvsname=kvs_24541_0 key=sharedFilename[0] [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpnEZdQ9 [proxy:0:0@weiser1] got pmi command (from 0): put kvsname=kvs_24541_0 key=P0-businesscard value=description#weiser1$port#56190$ifname#192.168.0.101$ [proxy:0:0@weiser1] cached command: P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 8): put kvsname=kvs_24541_0 key=P2-businesscard value=description#weiser1$port#40019$ifname#192.168.0.101$ [proxy:0:0@weiser1] cached command: P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 15): put kvsname=kvs_24541_0 key=P3-businesscard value=description#weiser1$port#57150$ifname#192.168.0.101$ [proxy:0:0@weiser1] cached command: P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 0): barrier_in [proxy:0:0@weiser1] got pmi command (from 6): put kvsname=kvs_24541_0 key=P1-businesscard value=description#weiser1$port#34048$ifname#192.168.0.101$ [proxy:0:0@weiser1] cached command: P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 8): barrier_in [proxy:0:0@weiser1] got pmi command (from 6): barrier_in [proxy:0:0@weiser1] got pmi command (from 15): barrier_in [proxy:0:0@weiser1] flushing 4 put command(s) out [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ [proxy:0:0@weiser1] forwarding command (cmd=put P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$) upstream [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in [proxy:0:1@weiser2] got pmi command (from 4): put kvsname=kvs_24541_0 key=P4-businesscard value=description#weiser2$port#60693$ifname#192.168.0.102$ [proxy:0:1@weiser2] cached command: P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 5): put kvsname=kvs_24541_0 key=P5-businesscard value=description#weiser2$port#49938$ifname#192.168.0.102$ [proxy:0:1@weiser2] cached command: P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 7): put kvsname=kvs_24541_0 key=P6-businesscard value=description#weiser2$port#33516$ifname#192.168.0.102$ [proxy:0:1@weiser2] cached command: P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 10): put kvsname=kvs_24541_0 key=P7-businesscard value=description#weiser2$port#43116$ifname#192.168.0.102$ [proxy:0:1@weiser2] cached command: P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ [proxy:0:1@weiser2] [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 4): barrier_in [proxy:0:1@weiser2] got pmi command (from 5): barrier_in [proxy:0:1@weiser2] got pmi command (from 7): barrier_in [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=keyval_cache P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=keyval_cache P0-businesscard=description#weiser1$port#56190$ifname#192.168.0.101$ P2-businesscard=description#weiser1$port#40019$ifname#192.168.0.101$ P3-businesscard=description#weiser1$port#57150$ifname#192.168.0.101$ P1-businesscard=description#weiser1$port#34048$ifname#192.168.0.101$ P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$ [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=barrier_out [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] [proxy:0:1@weiser2] got pmi command (from 10): barrier_in [proxy:0:1@weiser2] flushing 4 put command(s) out [proxy:0:1@weiser2] forwarding command (cmd=put P4-businesscard=description#weiser2$port#60693$ifname#192.168.0.102$ P5-businesscard=description#weiser2$port#49938$ifname#192.168.0.102$ P6-businesscard=description#weiser2$port#33516$ifname#192.168.0.102$ P7-businesscard=description#weiser2$port#43116$ifname#192.168.0.102$) upstream [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] got pmi command (from 4): get kvsname=kvs_24541_0 key=P0-businesscard [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=description#weiser1$port#56190$ifname#192.168.0.101$ ================================================================================ HPLinpack 2.1 -- High-Performance Linpack benchmark -- October 26, 2012 Written by A. Petitet and R. Clint Whaley, Innovative Computing Laboratory, UTK Modified by Piotr Luszczek, Innovative Computing Laboratory, UTK Modified by Julien Langou, University of Colorado Denver ================================================================================ An explanation of the input/output parameters follows: T/V : Wall time / encoded variant. N : The order of the coefficient matrix A. NB : The partitioning blocking factor. P : The number of process rows. Q : The number of process columns. Time : Time in seconds to solve the linear system. Gflops : Rate of execution for solving the linear system. The following parameter values will be used: N : 14616 NB : 168 PMAP : Row-major process mapping P : 2 Q : 4 PFACT : Right NBMIN : 4 NDIV : 2 RFACT : Crout BCAST : 1ringM DEPTH : 1 SWAP : Mix (threshold = 64) L1 : transposed form U : transposed form EQUIL : yes ALIGN : 8 double precision words -------------------------------------------------------------------------------- - The matrix A is randomly generated for each test. - The following scaled residual check will be computed: ||Ax-b||_oo / ( eps * ( || x ||_oo * || A ||_oo + || b ||_oo ) * N ) - The relative machine precision (eps) is taken to be 1.110223e-16 [proxy:0:0@weiser1] got pmi command (from 6): get - Computational tests pass if scaled residuals are less than 16.0 kvsname=kvs_24541_0 key=P5-businesscard [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=description#weiser2$port#49938$ifname#192.168.0.102$ [proxy:0:0@weiser1] got pmi command (from 15): get kvsname=kvs_24541_0 key=P7-businesscard [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=description#weiser2$port#43116$ifname#192.168.0.102$ [proxy:0:0@weiser1] got pmi command (from 8): get kvsname=kvs_24541_0 key=P6-businesscard [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=description#weiser2$port#33516$ifname#192.168.0.102$ [proxy:0:1@weiser2] got pmi command (from 5): get kvsname=kvs_24541_0 key=P1-businesscard [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=description#weiser1$port#34048$ifname#192.168.0.101$ =================================================================================== = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES = EXIT CODE: 9 = CLEANING UP REMAINING PROCESSES = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES =================================================================================== ----------- END -------------- if that can help :( On Fri, Jun 28, 2013 at 12:24 PM, Pavan Balaji <balaji(a)mcs.anl.gov> wrote: > > Looks like your application aborted for some reason. > > -- Pavan > > > On 06/27/2013 10:21 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > >> My bad, I just found out that there was a duplicate entry like: >> weiser1 127.0.1.1 >> weiser1 192.168.0.101 >> so i removed teh 127.x.x.x. entry and kept the hostfile contents similar >> on both nodes. Now previous error is reduced to this one: >> >> ------ START OF OUTPUT ------- >> >> ....some HPL startup string (no final result) >> ...skip..... >> >> ==============================**==============================** >> ======================= >> = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES >> = EXIT CODE: 9 >> = CLEANING UP REMAINING PROCESSES >> = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES >> ==============================**==============================** >> ======================= >> [proxy:0:0@weiser1] HYD_pmcd_pmip_control_cmd_cb >> (./pm/pmiserv/pmip_cb.c:886): assert (!closed) failed >> [proxy:0:0@weiser1] HYDT_dmxu_poll_wait_for_event >> (./tools/demux/demux_poll.c:**77): callback returned error status >> [proxy:0:0@weiser1] main (./pm/pmiserv/pmip.c:206): demux engine error >> waiting for event >> [mpiexec@weiser1] HYDT_bscu_wait_for_completion >> (./tools/bootstrap/utils/bscu_**wait.c:76): one of the processes >> terminated badly; aborting >> [mpiexec@weiser1] HYDT_bsci_wait_for_completion >> (./tools/bootstrap/src/bsci_**wait.c:23): launcher returned error waiting >> for completion >> [mpiexec@weiser1] HYD_pmci_wait_for_completion >> (./pm/pmiserv/pmiserv_pmci.c:**217): launcher returned error waiting for >> completion >> [mpiexec@weiser1] main (./ui/mpich/mpiexec.c:331): process manager error >> waiting for completion >> >> ------ END OF OUTPUT ------- >> >> >> >> On Fri, Jun 28, 2013 at 12:12 PM, Pavan Balaji <balaji(a)mcs.anl.gov >> <mailto:[email protected]>> wrote: >> >> >> On 06/27/2013 10:08 PM, Syed. Jahanzeb Maqbool Hashmi wrote: >> >> P4-businesscard=description#__**weiser2$port#57651$ifname#192.** >> __168.0.102$ >> P5-businesscard=description#__**weiser2$port#52622$ifname#192.** >> __168.0.102$ >> P6-businesscard=description#__**weiser2$port#55935$ifname#192.** >> __168.0.102$ >> P7-businesscard=description#__**weiser2$port#54952$ifname#192.** >> __168.0.102$ >> P0-businesscard=description#__**weiser1$port#41958$ifname#127.** >> __0.1.1$ >> P2-businesscard=description#__**weiser1$port#35049$ifname#127.** >> __0.1.1$ >> P1-businesscard=description#__**weiser1$port#39634$ifname#127.** >> __0.1.1$ >> P3-businesscard=description#__**weiser1$port#51802$ifname#127.** >> __0.1.1$ >> >> >> >> I have two concerns with your output. Let's start with the first. >> >> Did you look at this question on the FAQ page? >> >> "Is your /etc/hosts file consistent across all nodes? Unless you are >> using an external DNS server, the /etc/hosts file on every machine >> should contain the correct IP information about all hosts in the >> system." >> >> >> -- Pavan >> >> -- >> Pavan Balaji >> http://www.mcs.anl.gov/~balaji >> >> >> > -- > Pavan Balaji > http://www.mcs.anl.gov/~balaji >

1 0

Re: [mpich-discuss] mpich hangs
by Pavan Balaji 27 Jun '13

27 Jun '13

Looks like your application aborted for some reason. -- Pavan On 06/27/2013 10:21 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > My bad, I just found out that there was a duplicate entry like: > weiser1 127.0.1.1 > weiser1 192.168.0.101 > so i removed teh 127.x.x.x. entry and kept the hostfile contents similar > on both nodes. Now previous error is reduced to this one: > > ------ START OF OUTPUT ------- > > ....some HPL startup string (no final result) > ...skip..... > > =================================================================================== > = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES > = EXIT CODE: 9 > = CLEANING UP REMAINING PROCESSES > = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES > =================================================================================== > [proxy:0:0@weiser1] HYD_pmcd_pmip_control_cmd_cb > (./pm/pmiserv/pmip_cb.c:886): assert (!closed) failed > [proxy:0:0@weiser1] HYDT_dmxu_poll_wait_for_event > (./tools/demux/demux_poll.c:77): callback returned error status > [proxy:0:0@weiser1] main (./pm/pmiserv/pmip.c:206): demux engine error > waiting for event > [mpiexec@weiser1] HYDT_bscu_wait_for_completion > (./tools/bootstrap/utils/bscu_wait.c:76): one of the processes > terminated badly; aborting > [mpiexec@weiser1] HYDT_bsci_wait_for_completion > (./tools/bootstrap/src/bsci_wait.c:23): launcher returned error waiting > for completion > [mpiexec@weiser1] HYD_pmci_wait_for_completion > (./pm/pmiserv/pmiserv_pmci.c:217): launcher returned error waiting for > completion > [mpiexec@weiser1] main (./ui/mpich/mpiexec.c:331): process manager error > waiting for completion > > ------ END OF OUTPUT ------- > > > > On Fri, Jun 28, 2013 at 12:12 PM, Pavan Balaji <balaji(a)mcs.anl.gov > <mailto:[email protected]>> wrote: > > > On 06/27/2013 10:08 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > > P4-businesscard=description#__weiser2$port#57651$ifname#192.__168.0.102$ > P5-businesscard=description#__weiser2$port#52622$ifname#192.__168.0.102$ > P6-businesscard=description#__weiser2$port#55935$ifname#192.__168.0.102$ > P7-businesscard=description#__weiser2$port#54952$ifname#192.__168.0.102$ > P0-businesscard=description#__weiser1$port#41958$ifname#127.__0.1.1$ > P2-businesscard=description#__weiser1$port#35049$ifname#127.__0.1.1$ > P1-businesscard=description#__weiser1$port#39634$ifname#127.__0.1.1$ > P3-businesscard=description#__weiser1$port#51802$ifname#127.__0.1.1$ > > > I have two concerns with your output. Let's start with the first. > > Did you look at this question on the FAQ page? > > "Is your /etc/hosts file consistent across all nodes? Unless you are > using an external DNS server, the /etc/hosts file on every machine > should contain the correct IP information about all hosts in the > system." > > > -- Pavan > > -- > Pavan Balaji > http://www.mcs.anl.gov/~balaji > > -- Pavan Balaji http://www.mcs.anl.gov/~balaji

1 0

Re: [mpich-discuss] mpich hangs
by Syed. Jahanzeb Maqbool Hashmi 27 Jun '13

27 Jun '13

My bad, I just found out that there was a duplicate entry like: weiser1 127.0.1.1 weiser1 192.168.0.101 so i removed teh 127.x.x.x. entry and kept the hostfile contents similar on both nodes. Now previous error is reduced to this one: ------ START OF OUTPUT ------- ....some HPL startup string (no final result) ...skip..... =================================================================================== = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES = EXIT CODE: 9 = CLEANING UP REMAINING PROCESSES = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES =================================================================================== [proxy:0:0@weiser1] HYD_pmcd_pmip_control_cmd_cb (./pm/pmiserv/pmip_cb.c:886): assert (!closed) failed [proxy:0:0@weiser1] HYDT_dmxu_poll_wait_for_event (./tools/demux/demux_poll.c:77): callback returned error status [proxy:0:0@weiser1] main (./pm/pmiserv/pmip.c:206): demux engine error waiting for event [mpiexec@weiser1] HYDT_bscu_wait_for_completion (./tools/bootstrap/utils/bscu_wait.c:76): one of the processes terminated badly; aborting [mpiexec@weiser1] HYDT_bsci_wait_for_completion (./tools/bootstrap/src/bsci_wait.c:23): launcher returned error waiting for completion [mpiexec@weiser1] HYD_pmci_wait_for_completion (./pm/pmiserv/pmiserv_pmci.c:217): launcher returned error waiting for completion [mpiexec@weiser1] main (./ui/mpich/mpiexec.c:331): process manager error waiting for completion ------ END OF OUTPUT ------- On Fri, Jun 28, 2013 at 12:12 PM, Pavan Balaji <balaji(a)mcs.anl.gov> wrote: > > On 06/27/2013 10:08 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > >> P4-businesscard=description#**weiser2$port#57651$ifname#192.**168.0.102$ >> P5-businesscard=description#**weiser2$port#52622$ifname#192.**168.0.102$ >> P6-businesscard=description#**weiser2$port#55935$ifname#192.**168.0.102$ >> P7-businesscard=description#**weiser2$port#54952$ifname#192.**168.0.102$ >> P0-businesscard=description#**weiser1$port#41958$ifname#127.**0.1.1$ >> P2-businesscard=description#**weiser1$port#35049$ifname#127.**0.1.1$ >> P1-businesscard=description#**weiser1$port#39634$ifname#127.**0.1.1$ >> P3-businesscard=description#**weiser1$port#51802$ifname#127.**0.1.1$ >> > > I have two concerns with your output. Let's start with the first. > > Did you look at this question on the FAQ page? > > "Is your /etc/hosts file consistent across all nodes? Unless you are using > an external DNS server, the /etc/hosts file on every machine should contain > the correct IP information about all hosts in the system." > > > -- Pavan > > -- > Pavan Balaji > http://www.mcs.anl.gov/~balaji >

1 0

Re: [mpich-discuss] mpich hangs
by Pavan Balaji 27 Jun '13

27 Jun '13

On 06/27/2013 10:08 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > P4-businesscard=description#weiser2$port#57651$ifname#192.168.0.102$ > P5-businesscard=description#weiser2$port#52622$ifname#192.168.0.102$ > P6-businesscard=description#weiser2$port#55935$ifname#192.168.0.102$ > P7-businesscard=description#weiser2$port#54952$ifname#192.168.0.102$ > P0-businesscard=description#weiser1$port#41958$ifname#127.0.1.1$ > P2-businesscard=description#weiser1$port#35049$ifname#127.0.1.1$ > P1-businesscard=description#weiser1$port#39634$ifname#127.0.1.1$ > P3-businesscard=description#weiser1$port#51802$ifname#127.0.1.1$ I have two concerns with your output. Let's start with the first. Did you look at this question on the FAQ page? "Is your /etc/hosts file consistent across all nodes? Unless you are using an external DNS server, the /etc/hosts file on every machine should contain the correct IP information about all hosts in the system." -- Pavan -- Pavan Balaji http://www.mcs.anl.gov/~balaji

1 0

Re: [mpich-discuss] mpich hangs
by Syed. Jahanzeb Maqbool Hashmi 27 Jun '13

27 Jun '13

Here is the command I am giving: *$ mpiexec -verbose -hostfile machines ./xhpl* * * The hostfile "machines" contains: (two quadcore machines having ips 192.168.0.101 and 192.168.0.102) weiser1:4 weiser2:4 Here is the complete output: ------------ START OF OUTPUT ------------------- host: weiser1 host: weiser2 ================================================================================================== mpiexec options: ---------------- Base path: /mnt/nfs/install/mpich-install/bin/ Launcher: (null) Debug level: 1 Enable X: -1 Global environment: ------------------- TERM=xterm SHELL=/bin/bash XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422 SSH_CLIENT=192.168.0.3 57311 22 OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1 SSH_TTY=/dev/pts/0 USER=linaro LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36: LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib MAIL=/var/mail/linaro PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a LANG=C.UTF-8 SHLVL=1 HOME=/home/linaro LOGNAME=linaro SSH_CONNECTION=192.168.0.3 57311 192.168.0.101 22 LESSOPEN=| /usr/bin/lesspipe %s LESSCLOSE=/usr/bin/lesspipe %s %s _=/mnt/nfs/install/mpich-install/bin/mpiexec Hydra internal environment: --------------------------- GFORTRAN_UNBUFFERED_PRECONNECTED=y Proxy information: ********************* [1] proxy: weiser1 (4 cores) Exec list: ./xhpl (4 processes); [2] proxy: weiser2 (4 cores) Exec list: ./xhpl (4 processes); ================================================================================================== [mpiexec@weiser1] Timeout set to -1 (-1 means infinite) [mpiexec@weiser1] Got a control port string of weiser1:44161 Proxy launch args: /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy --control-port weiser1:44161 --debug --rmk user --launcher ssh --demux poll --pgid 0 --retries 10 --usize -2 --proxy-id Arguments being passed to proxy 0: --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname weiser1 --global-core-map 0,4,8 --pmi-id-map 0,0 --global-process-count 8 --auto-cleanup 1 --pmi-kvsname kvs_21930_0 --pmi-process-mapping (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' 'SHELL=/bin/bash' 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' 'SSH_CLIENT=192.168.0.3 57311 22' 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' 'USER=linaro' 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' 'MAIL=/var/mail/linaro' 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' 'SSH_CONNECTION=192.168.0.3 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' 'LESSCLOSE=/usr/bin/lesspipe %s %s' '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 --exec-local-env 0 --exec-wdir /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl Arguments being passed to proxy 1: --version 3.0.4 --iface-ip-env-name MPICH_INTERFACE_HOSTNAME --hostname weiser2 --global-core-map 0,4,8 --pmi-id-map 0,4 --global-process-count 8 --auto-cleanup 1 --pmi-kvsname kvs_21930_0 --pmi-process-mapping (vector,(0,2,4)) --ckpoint-num -1 --global-inherited-env 20 'TERM=xterm' 'SHELL=/bin/bash' 'XDG_SESSION_COOKIE=218a1dd8e20ea6d6ec61475b00000019-1372384778.679329-1845893422' 'SSH_CLIENT=192.168.0.3 57311 22' 'OLDPWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1' 'SSH_TTY=/dev/pts/0' 'USER=linaro' 'LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:' 'LD_LIBRARY_PATH=:/mnt/nfs/install/mpich-install/lib' 'MAIL=/var/mail/linaro' 'PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/mnt/nfs/install/mpich-install/bin' 'PWD=/mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a' 'LANG=C.UTF-8' 'SHLVL=1' 'HOME=/home/linaro' 'LOGNAME=linaro' 'SSH_CONNECTION=192.168.0.3 57311 192.168.0.101 22' 'LESSOPEN=| /usr/bin/lesspipe %s' 'LESSCLOSE=/usr/bin/lesspipe %s %s' '_=/mnt/nfs/install/mpich-install/bin/mpiexec' --global-user-env 0 --global-system-env 1 'GFORTRAN_UNBUFFERED_PRECONNECTED=y' --proxy-core-count 4 --exec --exec-appnum 0 --exec-proc-count 4 --exec-local-env 0 --exec-wdir /mnt/nfs/jahanzeb/bench/hpl/hpl-2.1/bin/armv7-a --exec-args 1 ./xhpl [mpiexec@weiser1] Launch arguments: /mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy --control-port weiser1:44161 --debug --rmk user --launcher ssh --demux poll --pgid 0 --retries 10 --usize -2 --proxy-id 0 [mpiexec@weiser1] Launch arguments: /usr/bin/ssh -x weiser2 "/mnt/nfs/install/mpich-install/bin/hydra_pmi_proxy" --control-port weiser1:44161 --debug --rmk user --launcher ssh --demux poll --pgid 0 --retries 10 --usize -2 --proxy-id 1 [proxy:0:0@weiser1] got pmi command (from 6): init pmi_version=1 pmi_subversion=1 [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:0@weiser1] got pmi command (from 6): get_maxes [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:0@weiser1] got pmi command (from 6): get_appnum [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:0@weiser1] got pmi command (from 6): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:0@weiser1] got pmi command (from 6): get kvsname=kvs_21930_0 key=PMI_process_mapping [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:0@weiser1] got pmi command (from 6): barrier_in [proxy:0:0@weiser1] got pmi command (from 15): init pmi_version=1 pmi_subversion=1 [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:0@weiser1] got pmi command (from 15): get_maxes [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:0@weiser1] got pmi command (from 15): get_appnum [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:0@weiser1] got pmi command (from 0): init pmi_version=1 pmi_subversion=1 [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:0@weiser1] got pmi command (from 15): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:0@weiser1] got pmi command (from 0): get_maxes [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:0@weiser1] got pmi command (from 15): get kvsname=kvs_21930_0 key=PMI_process_mapping [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:0@weiser1] got pmi command (from 0): get_appnum [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:0@weiser1] got pmi command (from 15): barrier_in [proxy:0:0@weiser1] got pmi command (from 0): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:0@weiser1] got pmi command (from 0): get kvsname=kvs_21930_0 key=PMI_process_mapping [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:0@weiser1] got pmi command (from 0): put kvsname=kvs_21930_0 key=sharedFilename[0] value=/dev/shm/mpich_shar_tmpIoDbts [proxy:0:0@weiser1] cached command: sharedFilename[0]=/dev/shm/mpich_shar_tmpIoDbts [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 8): init pmi_version=1 pmi_subversion=1 [proxy:0:0@weiser1] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:0@weiser1] got pmi command (from 0): barrier_in [proxy:0:0@weiser1] got pmi command (from 8): get_maxes [proxy:0:0@weiser1] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:0@weiser1] got pmi command (from 8): get_appnum [proxy:0:0@weiser1] PMI response: cmd=appnum appnum=0 [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:0@weiser1] got pmi command (from 8): get_my_kvsname [proxy:0:0@weiser1] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:0@weiser1] got pmi command (from 8): get kvsname=kvs_21930_0 key=PMI_process_mapping [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:0@weiser1] got pmi command (from 8): barrier_in [proxy:0:0@weiser1] flushing 1 put command(s) out [proxy:0:0@weiser1] forwarding command (cmd=put sharedFilename[0]=/dev/shm/mpich_shar_tmpIoDbts) upstream [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put sharedFilename[0]=/dev/shm/mpich_shar_tmpIoDbts [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in [proxy:0:1@weiser2] got pmi command (from 4): init pmi_version=1 pmi_subversion=1 [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:1@weiser2] got pmi command (from 4): get_maxes [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:1@weiser2] got pmi command (from 4): get_appnum [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:1@weiser2] got pmi command (from 4): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:1@weiser2] got pmi command (from 4): get kvsname=kvs_21930_0 key=PMI_process_mapping [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:1@weiser2] got pmi command (from 7): init pmi_version=1 pmi_subversion=1 [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:1@weiser2] got pmi command (from 7): get_maxes [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:1@weiser2] got pmi command (from 7): get_appnum [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:1@weiser2] got pmi command (from 7): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:1@weiser2] got pmi command (from 7): get kvsname=kvs_21930_0 key=PMI_process_mapping [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:1@weiser2] got pmi command (from 7): barrier_in [proxy:0:1@weiser2] got pmi command (from 4): put kvsname=kvs_21930_0 key=sharedFilename[4] value=/dev/shm/mpich_shar_tmpeuylT4 [proxy:0:1@weiser2] cached command: sharedFilename[4]=/dev/shm/mpich_shar_tmpeuylT4 [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 4): barrier_in [proxy:0:1@weiser2] got pmi command (from 5): init pmi_version=1 pmi_subversion=1 [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [proxy:0:1@weiser2] got pmi command (from 5): get_maxes [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:1@weiser2] got pmi command (from 5): get_appnum [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:1@weiser2] got pmi command (from 5): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:1@weiser2] got pmi command (from 5): get kvsname=kvs_21930_0 key=PMI_process_mapping [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:1@weiser2] got pmi command (from 5): barrier_in [proxy:0:1@weiser2] got pmi command (from 10): init pmi_version=1 pmi_subversion=1 [proxy:0:1@weiser2] PMI response: cmd=response_to_init pmi_version=1 pmi_subversion=1 rc=0 [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put sharedFilename[4]=/dev/shm/mpich_shar_tmpeuylT4 [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=keyval_cache sharedFilename[0]=/dev/shm/mpich_shar_tmpIoDbts sharedFilename[4]=/dev/shm/mpich_shar_tmpeuylT4 [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=keyval_cache sharedFilename[0]=/dev/shm/mpich_shar_tmpIoDbts sharedFilename[4]=/dev/shm/mpich_shar_tmpeuylT4 [mpiexec@weiser1] PMI response to fd 6 pid 10: cmd=barrier_out [mpiexec@weiser1] PMI response to fd 7 pid 10: cmd=barrier_out [proxy:0:1@weiser2] got pmi command (from 10): get_maxes [proxy:0:1@weiser2] PMI response: cmd=maxes kvsname_max=256 keylen_max=64 vallen_max=1024 [proxy:0:1@weiser2] got pmi command (from 10): get_appnum [proxy:0:1@weiser2] PMI response: cmd=appnum appnum=0 [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:1@weiser2] got pmi command (from 10): get_my_kvsname [proxy:0:1@weiser2] PMI response: cmd=my_kvsname kvsname=kvs_21930_0 [proxy:0:1@weiser2] got pmi command (from 10): get kvsname=kvs_21930_0 key=PMI_process_mapping [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=(vector,(0,2,4)) [proxy:0:1@weiser2] got pmi command (from 10): barrier_in [proxy:0:1@weiser2] flushing 1 put command(s) out [proxy:0:1@weiser2] forwarding command (cmd=put sharedFilename[4]=/dev/shm/mpich_shar_tmpeuylT4) upstream [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] got pmi command (from 6): get kvsname=kvs_21930_0 key=sharedFilename[0] [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpIoDbts [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] got pmi command (from 5): get kvsname=kvs_21930_0 key=sharedFilename[4] [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpeuylT4 [proxy:0:1@weiser2] got pmi command (from 7): get kvsname=kvs_21930_0 key=sharedFilename[4] [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpeuylT4 [proxy:0:1@weiser2] got pmi command (from 10): get kvsname=kvs_21930_0 key=sharedFilename[4] [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpeuylT4 [proxy:0:0@weiser1] got pmi command (from 8): get kvsname=kvs_21930_0 key=sharedFilename[0] [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpIoDbts [proxy:0:0@weiser1] got pmi command (from 15): get kvsname=kvs_21930_0 [proxy:0:1@weiser2] got pmi command (from 4): put kvsname=kvs_21930_0 key=P4-businesscard value=description#weiser2$port#57651$ifname#192.168.0.102$ [proxy:0:1@weiser2] cached command: P4-businesscard=description#weiser2$port#57651$ifname#192.168.0.102$ [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 5): put kvsname=kvs_21930_0 key=P5-businesscard value=description#weiser2$port#52622$ifname#192.168.0.102$ [proxy:0:1@weiser2] cached command: P5-businesscard=description#weiser2$port#52622$ifname#192.168.0.102$ [proxy:0:1@weiser2] [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put P4-businesscard=description#weiser2$port#57651$ifname#192.168.0.102$ P5-businesscard=description#weiser2$port#52622$ifname#192.168.0.102$ P6-businesscard=description#weiser2$port#55935$ifname#192.168.0.102$ P7-businesscard=description#weiser2$port#54952$ifname#192.168.0.102$ [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 4): barrier_in [proxy:0:1@weiser2] got pmi command (from 7): put kvsname=kvs_21930_0 key=P6-businesscard value=description#weiser2$port#55935$ifname#192.168.0.102$ [proxy:0:1@weiser2] cached command: P6-businesscard=description#weiser2$port#55935$ifname#192.168.0.102$ [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 7): barrier_in [proxy:0:1@weiser2] got pmi command (from 10): put kvsname=kvs_21930_0 key=P7-businesscard value=description#weiser2$port#54952$ifname#192.168.0.102$ [proxy:0:1@weiser2] cached command: P7-businesscard=description#weiser2$port#54952$ifname#192.168.0.102$ [proxy:0:1@weiser2] PMI response: cmd=put_result rc=0 msg=success [proxy:0:1@weiser2] got pmi command (from 10): barrier_in [proxy:0:1@weiser2] got pmi command (from 5): barrier_in [proxy:0:1@weiser2] flushing 4 put command(s) out [proxy:0:1@weiser2] forwarding command (cmd=put P4-businesscard=description#weiser2$port#57651$ifname#192.168.0.102$ P5-businesscard=description#weiser2$port#52622$ifname#192.168.0.102$ P6-businesscard=description#weiser2$port#55935$ifname#192.168.0.102$ P7-businesscard=description#weiser2$port#54952$ifname#192.168.0.102$) upstream [proxy:0:1@weiser2] forwarding command (cmd=barrier_in) upstream key=sharedFilename[0] [proxy:0:0@weiser1] PMI response: cmd=get_result rc=0 msg=success value=/dev/shm/mpich_shar_tmpIoDbts [proxy:0:0@weiser1] got pmi command (from 0): put kvsname=kvs_21930_0 key=P0-businesscard value=description#weiser1$port#41958$ifname#127.0.1.1$ [proxy:0:0@weiser1] cached command: P0-businesscard=description#weiser1$port#41958$ifname#127.0.1.1$ [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 8): put kvsname=kvs_21930_0 key=P2-businesscard value=description#weiser1$port#35049$ifname#127.0.1.1$ [proxy:0:0@weiser1] cached command: P2-businesscard=description#weiser1$port#35049$ifname#127.0.1.1$ [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 0): barrier_in [proxy:0:0@weiser1] got pmi command (from 6): put kvsname=kvs_21930_0 key=P1-businesscard value=description#weiser1$port#39634$ifname#127.0.1.1$ [proxy:0:0@weiser1] cached command: P1-businesscard=description#weiser1$port#39634$ifname#127.0.1.1$ [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 6): barrier_in [proxy:0:0@weiser1] got pmi command (from 8): barrier_in [proxy:0:0@weiser1] got pmi command (from 15): put kvsname=kvs_21930_0 key=P3-businesscard value=description#weiser1$port#51802$ifname#127.0.1.1$ [proxy:0:0@weiser1] cached command: P3-businesscard=description#weiser1$port#51802$ifname#127.0.1.1$ [proxy:0:0@weiser1] PMI response: cmd=put_result rc=0 msg=success [proxy:0:0@weiser1] got pmi command (from 15): barrier_in [proxy:0:0@weiser1] flushing 4 put command(s) out [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=put P0-businesscard=description#weiser1$port#41958$ifname#127.0.1.1$ P2-businesscard=description#weiser1$port#35049$ifname#127.0.1.1$ P1-businesscard=description#weiser1$port#39634$ifname#127.0.1.1$ P3-businesscard=description#weiser1$port#51802$ifname#127.0.1.1$ [proxy:0:0@weiser1] forwarding command (cmd=put P0-businesscard=description#weiser1$port#41958$ifname#127.0.1.1$ P2-businesscard=description#weiser1$port#35049$ifname#127.0.1.1$ P1-businesscard=description#weiser1$port#39634$ifname#127.0.1.1$ P3-businesscard=description#weiser1$port#51802$ifname#127.0.1.1$) upstream [proxy:0:0@weiser1] forwarding command (cmd=barrier_in) upstream [mpiexec@weiser1] [pgid: 0] got PMI command: cmd=barrier_in [mpiexec@weiser1] PMI response to fd 6 pid 15: cmd=keyval_cache P4-businesscard=description#weiser2$port#57651$ifname#192.168.0.102$ P5-businesscard=description#weiser2$port#52622$ifname#192.168.0.102$ P6-businesscard=description#weiser2$port#55935$ifname#192.168.0.102$ P7-businesscard=description#weiser2$port#54952$ifname#192.168.0.102$ P0-businesscard=description#weiser1$port#41958$ifname#127.0.1.1$ P2-businesscard=description#weiser1$port#35049$ifname#127.0.1.1$ P1-businesscard=description#weiser1$port#39634$ifname#127.0.1.1$ P3-businesscard=description#weiser1$port#51802$ifname#127.0.1.1$ [mpiexec@weiser1] PMI response to fd 7 pid 15: cmd=keyval_cache P4-businesscard=description#weiser2$port#57651$ifname#192.168.0.102$ P5-businesscard=description#weiser2$port#52622$ifname#192.168.0.102$ P6-businesscard=description#weiser2$port#55935$ifname#192.168.0.102$ P7-businesscard=description#weiser2$port#54952$ifname#192.168.0.102$ P0-businesscard=description#weiser1$port#41958$ifname#127.0.1.1$ P2-businesscard=description#weiser1$port#35049$ifname#127.0.1.1$ P1-businesscard=description#weiser1$port#39634$ifname#127.0.1.1$ P3-businesscard=description#weiser1$port#51802$ifname#127.0.1.1$ [mpiexec@weiser1] PMI response to fd 6 pid 15: cmd=barrier_out [mpiexec@weiser1] PMI response to fd 7 pid 15: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:0@weiser1] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] PMI response: cmd=barrier_out [proxy:0:1@weiser2] got pmi command (from 4): get kvsname=kvs_21930_0 key=P0-businesscard [proxy:0:1@weiser2] PMI response: cmd=get_result rc=0 msg=success value=description#weiser1$port#41958$ifname#127.0.1.1$ =================================================================================== = BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES = EXIT CODE: 1 = CLEANING UP REMAINING PROCESSES = YOU CAN IGNORE THE BELOW CLEANUP MESSAGES =================================================================================== ------------ END OF OUTPUT ------------------- On Fri, Jun 28, 2013 at 12:03 PM, Pavan Balaji <balaji(a)mcs.anl.gov> wrote: > > On 06/27/2013 10:01 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > >> I feel sorry to not able to provide more information and keeping the >> thread long. >> But still there is no ufw in my /usr/sbin. >> >> Actually, I am using an ARM development board (ORDROID-X2) which has >> ubuntu linaro image. I suppose that due to space limitation, this image >> may not include additional utility features like firewall but only the >> core functionality. >> > > Ah, this information would have been useful to start with. > > Can you give the exact command-line you are using, including the contents > of your machinefile? Also, run mpiexec with the -verbose option and send > its output as well. > > > -- Pavan > > -- > Pavan Balaji > http://www.mcs.anl.gov/~balaji >

1 0

Re: [mpich-discuss] mpich hangs
by Pavan Balaji 27 Jun '13

27 Jun '13

On 06/27/2013 10:01 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > I feel sorry to not able to provide more information and keeping the > thread long. > But still there is no ufw in my /usr/sbin. > > Actually, I am using an ARM development board (ORDROID-X2) which has > ubuntu linaro image. I suppose that due to space limitation, this image > may not include additional utility features like firewall but only the > core functionality. Ah, this information would have been useful to start with. Can you give the exact command-line you are using, including the contents of your machinefile? Also, run mpiexec with the -verbose option and send its output as well. -- Pavan -- Pavan Balaji http://www.mcs.anl.gov/~balaji

1 0

Re: [mpich-discuss] mpich hangs
by Syed. Jahanzeb Maqbool Hashmi 27 Jun '13

27 Jun '13

I feel sorry to not able to provide more information and keeping the thread long. But still there is no ufw in my /usr/sbin. Actually, I am using an ARM development board (ORDROID-X2) which has ubuntu linaro image. I suppose that due to space limitation, this image may not include additional utility features like firewall but only the core functionality. On Fri, Jun 28, 2013 at 11:57 AM, Pavan Balaji <balaji(a)mcs.anl.gov> wrote: > > % sudo /usr/sbin/ufw status > > > On 06/27/2013 09:52 PM, Syed. Jahanzeb Maqbool Hashmi wrote: > >> Yes thats what I did before and found out this to be exact: >> "sudo: ufw: command not found" >> >> >> On Fri, Jun 28, 2013 at 11:50 AM, Pavan Balaji <balaji(a)mcs.anl.gov >> <mailto:[email protected]>> wrote: >> >> >> IIRC, Ubuntu has a firewall setup by default. Try this: >> >> % sudo ufw status >> >> -- Pavan >> >> >> On 06/27/2013 09:48 PM, Syed. Jahanzeb Maqbool Hashmi wrote: >> >> >> As I already read some discussion on the mpich thread and I came >> to know >> these questions before: >> >> * *Can you ssh from "node01" to "node02"?* >> >> Yes I have passwordless ssh from each node to other (and >> vice versa) >> * *Make sure the firewalls are turned off on all machines.* >> >> I am using Ubuntu Linaro, 12.04, and I have no firewall >> installed on >> all the nodes. >> >> >> Any other workaround :( >> >> On Fri, Jun 28, 2013 at 11:43 AM, Pavan Balaji >> <balaji(a)mcs.anl.gov <mailto:[email protected]> >> <mailto:[email protected] <mailto:[email protected]>>> wrote: >> >> >> On 06/27/2013 09:41 PM, Syed. Jahanzeb Maqbool Hashmi wrote: >> >> MPID_nem_tcp_connpoll(1826): Communication error with >> rank 0: >> Connection >> refused >> >> >> Sounds like a firewall problem. >> >> http://wiki.mpich.org/mpich/__**__index.php/Frequently_Asked__** >> ___Questions#Q:_My_MPI_**program_____aborts_with_an_** >> error_saying_____it_cannot_**communicate_with_____other_**processes<http://wiki.mpich.org/mpich/____index.php/Frequently_Asked_____Questions#Q:…> >> <http://wiki.mpich.org/mpich/_**_index.php/Frequently_Asked___** >> Questions#Q:_My_MPI_program___**aborts_with_an_error_saying___** >> it_cannot_communicate_with___**other_processes<http://wiki.mpich.org/mpich/__index.php/Frequently_Asked___Questions#Q:_My_…> >> > >> >> >> >> <http://wiki.mpich.org/mpich/_**_index.php/Frequently_Asked___** >> Questions#Q:_My_MPI_program___**aborts_with_an_error_saying___** >> it_cannot_communicate_with___**other_processes<http://wiki.mpich.org/mpich/__index.php/Frequently_Asked___Questions#Q:_My_…> >> <http://wiki.mpich.org/mpich/**index.php/Frequently_Asked_** >> Questions#Q:_My_MPI_program_**aborts_with_an_error_saying_** >> it_cannot_communicate_with_**other_processes<http://wiki.mpich.org/mpich/index.php/Frequently_Asked_Questions#Q:_My_MPI_…> >> >> >> >> >> -- Pavan >> >> -- >> Pavan Balaji >> http://www.mcs.anl.gov/~balaji >> >> >> >> -- >> Pavan Balaji >> http://www.mcs.anl.gov/~balaji >> >> >> > -- > Pavan Balaji > http://www.mcs.anl.gov/~balaji >

1 0

← Newer
1
2
3
4
5
6
7
...
25
Older →

Jump to page: