February 2012 - cgma-dev - mailman3.cels.anl.gov

Re: [cgma-dev] OCC MacOS compile successful
by Jane Hu 28 Feb '12

28 Feb '12

Can you give me some detailed debug info.? it runs ok on Linux. Thanks. Jane On Tue, Feb 28, 2012 at 11:41 AM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: > Thanks, Jane. I made a couple of changes in addition to checking out the > latest version and recompilng: > 1. Installed gcc -4.7 (The previous error might be a compiler issue as per > http://www.opencascade.org/org/forum/thread_19739/) > 2. Applied the OCC652 patch in cgm/geom/occ > > make works ! > make check gives me this error > make check-TESTS > Geometry engine set to: OpenCascade 6.5 > ... Step File Reading : ilc_13body.stp > ... STEP File Read ... > Elapsed time: 0 Hours 0 Minutes 0.007108 Seconds > CPU user time: 0.01 seconds > CPU system time: 0 seconds > *** Error on Record 648 (on 9879 -> 6 % in File) *** Ident #479 > Complex Type incorrect : SOLID_ANGLE_UNIT / SI_UNIT ... > *** Error on Record 862 (on 9879 -> 8 % in File) *** Ident #650 > Complex Type incorrect : NAMED_UNIT / LENGTH_UNIT ... > *** Error on Record 1489 (on 9879 -> 15 % in File) *** Ident #1115 > Complex Type incorrect : RATIONAL_B_SPLINE_CURVE / BOUNDED_CURVE ... > *** Error > .................. > *** Error on Record 2660 (on 9879 -> 26 % in File) *** Ident #1444 > Complex Type incorrect : GEOMETRIC_REPRESENTATION_ITEM / CURVE ... > ... Step File loaded ... > Elapsed time: 0 Hours 0 Minutes 0.01294 Seconds > CPU user time: 0.01 seconds > CPU system time: 0 seconds > 9879 records (entities,sub-lists,scopes), 29736 parameters > > ... Parameters prepared ... Elapsed time: 0 Hours 0 Minutes 0.016723 > Seconds > CPU user time: 0.02 seconds > CPU system time: 0 seconds > Report : 75 unknown entities > ... Objets analysed ... > Elapsed time: 0 Hours 0 Minutes 0.023135 Seconds > CPU user time: 0.02 seconds > CPU system time: 0 seconds > STEP Loading done : 5784 Entities > /bin/sh: line 1: 29000 Segmentation fault: 11 ${dir}$tst > FAIL: test_edge_orient > Using default input file: ./../test/LeverArm.brep > Geometry engine set to: OpenCascade 6.5 > > > ITAPS GEOMETRY INTERFACE TEST PROGRAM: > > /bin/sh: line 1: 29019 Segmentation fault: 11 ${dir}$tst > FAIL: testgeom_occ > > > > Creating Prism > > terminate called throwing an exception > > /bin/sh: line 1: 29037 Abort trap: 6 ${dir}$tst > FAIL: copy_attrib > =================== > 3 of 3 tests failed > =================== > make[4]: *** [check-TESTS] Error 1 > make[3]: *** [check-am] Error 2 > make[2]: *** [check-recursive] Error 1 > make[1]: *** [check] Error 2 > make: *** [check-recursive] Error 1 > > > Rajeev > > ------------------------------ > *From:* Jane Hu <janejhu(a)gmail.com> > *To:* Rajeev Jain <jain(a)mcs.anl.gov> > *Cc:* Tim Tautges <tautges(a)mcs.anl.gov>; CGMA Development < > cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> > *Sent:* Tuesday, February 28, 2012 10:28 AM > > *Subject:* Re: [cgma-dev] OCC MacOS compile successful > > > Hi, Rajeev, > > I just checked in r5411, please update your cgm to see if it fixes the > problem. > > Jane > > On Mon, Feb 27, 2012 at 2:22 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: > > Right, I was missing DYLD_LBRARY_PATH. CGM configures now, make runs for a > while then I get the following error: > .... > In copy constructor > 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const > BRepBuilderAPI_MakeShape&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: > error: 'TopTools_ListOfShape::TopTools_ListOfShape(const > TopTools_ListOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeShape.hxx:38: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: > In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const > BRepBuilderAPI_MakeWire&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: > note: synthesized method > 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const > BRepBuilderAPI_MakeShape&)' first required here > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx: > In copy constructor 'BRepLib_MakeShape::BRepLib_MakeShape(const > BRepLib_MakeShape&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: > error: 'TopTools_ListOfShape::TopTools_ListOfShape(const > TopTools_ListOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: > error: 'TopTools_ListOfShape::TopTools_ListOfShape(const > TopTools_ListOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: > error: 'TopTools_ListOfShape::TopTools_ListOfShape(const > TopTools_ListOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx: > In copy constructor 'BRepLib_MakeWire::BRepLib_MakeWire(const > BRepLib_MakeWire&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: > note: synthesized method 'BRepLib_MakeShape::BRepLib_MakeShape(const > BRepLib_MakeShape&)' first required here > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_MapOfShape.hxx:88: > error: 'TopTools_MapOfShape::TopTools_MapOfShape(const > TopTools_MapOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: > In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const > BRepBuilderAPI_MakeWire&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: > note: synthesized method 'BRepLib_MakeWire::BRepLib_MakeWire(const > BRepLib_MakeWire&)' first required here > OCCModifyEngine.cpp: In member function 'CubitStatus > OCCModifyEngine::do_loft(BRepOffsetAPI_ThruSections&, > DLIList<DLIList<TopoDS_Edge*>*>) const': > OCCModifyEngine.cpp:952: note: synthesized method > 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const > BRepBuilderAPI_MakeWire&)' first required here > make[4]: *** [OCCModifyEngine.lo] Error 1 > make[3]: *** [all-recursive] Error 1 > make[2]: *** [all] Error 2 > make[1]: *** [all-recursive] Error 1 > make: *** [all] Error 2 > > > Rajeev > > ------------------------------ > *From:* Jane Hu <janejhu(a)gmail.com> > *To:* Rajeev Jain <jain(a)mcs.anl.gov> > *Cc:* Tim Tautges <tautges(a)mcs.anl.gov>; CGMA Development < > cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> > *Sent:* Monday, February 27, 2012 9:42 AM > *Subject:* Re: [cgma-dev] OCC MacOS compile successful > > Hi, Rajeev: > > It's good news that you are able to build OCC in Mac! > > I saw this error before too in building CGM on OCC on Linux. However, it > turned out to be a set up problem. Can you look at config.log, and check if > it said that you are using the correctly OCC library? You have to set the > LD_LIBRARY_PATH to include your new build directory. > > Hope it helps. > > Jane > > On Fri, Feb 24, 2012 at 12:21 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: > > Thanks, James. > I was able to build OCC. Did you get CGM to work? > Configuring CGM I get this: > checking if OpenCascade requires -lpthread... configure: error: Cannot > link libTKKernel with Standard_Mutex > > Rajeev > > ------------------------------ > *From:* Tim Tautges <tautges(a)mcs.anl.gov> > *To:* CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges < > jamesdtautges(a)gmail.com> > *Sent:* Friday, January 6, 2012 9:10 AM > *Subject:* [cgma-dev] OCC MacOS compile successful > > Hi all, > Good news, last night my son James, hacker extraordinaire, got OCC 6.5.2 > to compile successfully on MacOS. The details: > > - Snow leopard, gcc4.2, OCC6.5.2 (straight from the OCC download page) > - Besides the following changes, follow the steps on > http://opencascade.blogspot.com/2010/04/porting-on-macos.html > - Run "autoreconf -fi" in the ros folder and then "aclocal", "automake", > and "autoconf" > > - Add the following code to the platform specific part of > ros/src/OSD/OSD_Chronometer.cxx: > #ifdef __MACH__ > # include <time.h> > # include <sys/time.h> > # include <mach/clock.h> > # include <mach/mach.h> > #endif > > - And then add this code to the OSD_Chronometer::GetThreadCPU function: > #elif defined(__MACH__) > struct timespec ts; > clock_serv_t cclock; > mach_timespec_t mts; > host_get_clock_service(mach_host_self(), CALENDAR_CLOCK, &cclock); > clock_get_time(cclock, &mts); > mach_port_deallocate(mach_task_self(), cclock); > ts.tv_sec = mts.tv_sec; > ts.tv_nsec = mts.tv_nsec; > > - Proceed to configure, make, and install > > The new version of OSD_Chronometer.cxx is attached. > > We haven't built or tested CGM on top of this, but that's next. > > - tim > > -- > ================================================================ > "You will keep in perfect peace him whose mind is > steadfast, because he trusts in you." Isaiah 26:3 > > Tim Tautges Argonne National Laboratory > (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) > phone (gvoice): (608) 354-1459 1500 Engineering Dr. > fax: (608) 263-4499 Madison, WI 53706 > > > > > > > > > >

1 0

Re: [cgma-dev] OCC MacOS compile successful
by Rajeev Jain 28 Feb '12

28 Feb '12

Thanks, Jane. I made a couple of changes in addition to checking out the latest version and recompilng: 1. Installed gcc -4.7 (The previous error might be a compiler issue as per http://www.opencascade.org/org/forum/thread_19739/) 2. Applied the OCC652 patch in cgm/geom/occ make works ! make check gives me this error make check-TESTS Geometry engine set to: OpenCascade 6.5 ... Step File Reading : ilc_13body.stp ... STEP File Read ... Elapsed time: 0 Hours 0 Minutes 0.007108 Seconds CPU user time: 0.01 seconds CPU system time: 0 seconds *** Error on Record 648 (on 9879 -> 6 % in File) *** Ident #479 Complex Type incorrect : SOLID_ANGLE_UNIT / SI_UNIT ... *** Error on Record 862 (on 9879 -> 8 % in File) *** Ident #650 Complex Type incorrect : NAMED_UNIT / LENGTH_UNIT ... *** Error on Record 1489 (on 9879 -> 15 % in File) *** Ident #1115 Complex Type incorrect : RATIONAL_B_SPLINE_CURVE / BOUNDED_CURVE ... *** Error .................. *** Error on Record 2660 (on 9879 -> 26 % in File) *** Ident #1444 Complex Type incorrect : GEOMETRIC_REPRESENTATION_ITEM / CURVE ... ... Step File loaded ... Elapsed time: 0 Hours 0 Minutes 0.01294 Seconds CPU user time: 0.01 seconds CPU system time: 0 seconds 9879 records (entities,sub-lists,scopes), 29736 parameters ... Parameters prepared ... Elapsed time: 0 Hours 0 Minutes 0.016723 Seconds CPU user time: 0.02 seconds CPU system time: 0 seconds Report : 75 unknown entities ... Objets analysed ... Elapsed time: 0 Hours 0 Minutes 0.023135 Seconds CPU user time: 0.02 seconds CPU system time: 0 seconds STEP Loading done : 5784 Entities /bin/sh: line 1: 29000 Segmentation fault: 11 ${dir}$tst FAIL: test_edge_orient Using default input file: ./../test/LeverArm.brep Geometry engine set to: OpenCascade 6.5 ITAPS GEOMETRY INTERFACE TEST PROGRAM: /bin/sh: line 1: 29019 Segmentation fault: 11 ${dir}$tst FAIL: testgeom_occ Creating Prism terminate called throwing an exception /bin/sh: line 1: 29037 Abort trap: 6 ${dir}$tst FAIL: copy_attrib =================== 3 of 3 tests failed =================== make[4]: *** [check-TESTS] Error 1 make[3]: *** [check-am] Error 2 make[2]: *** [check-recursive] Error 1 make[1]: *** [check] Error 2 make: *** [check-recursive] Error 1 Rajeev >________________________________ > From: Jane Hu <janejhu(a)gmail.com> >To: Rajeev Jain <jain(a)mcs.anl.gov> >Cc: Tim Tautges <tautges(a)mcs.anl.gov>; CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >Sent: Tuesday, February 28, 2012 10:28 AM >Subject: Re: [cgma-dev] OCC MacOS compile successful > > > >Hi, Rajeev, > >I just checked in r5411, please update your cgm to see if it fixes the problem. > >Jane > > >On Mon, Feb 27, 2012 at 2:22 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: > >Right, I was missing DYLD_LBRARY_PATH. CGM configures now, make runs for a while then I get the following error: >>.... >>In copy constructor 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const BRepBuilderAPI_MakeShape&)': >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeShape.hxx:38: error: within this context >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const BRepBuilderAPI_MakeWire&)': >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: note: synthesized method 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const BRepBuilderAPI_MakeShape&)' first required here >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx: In copy constructor 'BRepLib_MakeShape::BRepLib_MakeShape(const BRepLib_MakeShape&)': >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: error: within this context >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: error: within this context >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: error: within this context >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx: In copy constructor 'BRepLib_MakeWire::BRepLib_MakeWire(const BRepLib_MakeWire&)': >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: note: synthesized method 'BRepLib_MakeShape::BRepLib_MakeShape(const BRepLib_MakeShape&)' first required here >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_MapOfShape.hxx:88: error: 'TopTools_MapOfShape::TopTools_MapOfShape(const TopTools_MapOfShape&)' is private >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: error: within this context >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const BRepBuilderAPI_MakeWire&)': >>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: note: synthesized method 'BRepLib_MakeWire::BRepLib_MakeWire(const BRepLib_MakeWire&)' first required here >>OCCModifyEngine.cpp: In member function 'CubitStatus OCCModifyEngine::do_loft(BRepOffsetAPI_ThruSections&, DLIList<DLIList<TopoDS_Edge*>*>) const': >>OCCModifyEngine.cpp:952: note: synthesized method 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const BRepBuilderAPI_MakeWire&)' first required here >>make[4]: *** [OCCModifyEngine.lo] Error 1 >>make[3]: *** [all-recursive] Error 1 >>make[2]: *** [all] Error 2 >>make[1]: *** [all-recursive] Error 1 >>make: *** [all] Error 2 >> >> >> >>Rajeev >> >> >> >>>________________________________ >>> From: Jane Hu <janejhu(a)gmail.com> >>>To: Rajeev Jain <jain(a)mcs.anl.gov> >>>Cc: Tim Tautges <tautges(a)mcs.anl.gov>; CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >>>Sent: Monday, February 27, 2012 9:42 AM >>>Subject: Re: [cgma-dev] OCC MacOS compile successful >>> >>> >>> >>>Hi, Rajeev: >>> >>>It's good news that you are able to build OCC in Mac! >>> >>>I saw this error before too in building CGM on OCC on Linux. However, it turned out to be a set up problem. Can you look at config.log, and check if it said that you are using the correctly OCC library? You have to set the LD_LIBRARY_PATH to include your new build directory. >>> >>>Hope it helps. >>> >>>Jane >>> >>> >>>On Fri, Feb 24, 2012 at 12:21 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: >>> >>>Thanks, James. >>>>I was able to build OCC. Did you get CGM to work? >>>>Configuring CGM I get this: >>>>checking if OpenCascade requires -lpthread... configure: error: Cannot link libTKKernel with Standard_Mutex >>>> >>>> >>>>Rajeev >>>> >>>> >>>> >>>>>________________________________ >>>>> From: Tim Tautges <tautges(a)mcs.anl.gov> >>>>>To: CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >>>>>Sent: Friday, January 6, 2012 9:10 AM >>>>>Subject: [cgma-dev] OCC MacOS compile successful >>>>> >>>>> >>>>>Hi all, >>>>> Good news, last night my son James, hacker extraordinaire, got OCC 6.5.2 to compile successfully on MacOS. The details: >>>>> >>>>>- Snow leopard, gcc4.2, OCC6.5.2 (straight from the OCC download page) >>>>>- Besides the following changes, follow the steps on http://opencascade.blogspot.com/2010/04/porting-on-macos.html >>>>>- Run "autoreconf -fi" in the ros folder and then "aclocal", "automake", and "autoconf" >>>>> >>>>>- Add the following code to the platform specific part of ros/src/OSD/OSD_Chronometer.cxx: >>>>>#ifdef __MACH__ >>>>># include <time.h> >>>>># include <sys/time.h> >>>>># include <mach/clock.h> >>>>># include <mach/mach.h> >>>>>#endif >>>>> >>>>>- And then add this code to the OSD_Chronometer::GetThreadCPU function: >>>>>#elif defined(__MACH__) >>>>> struct timespec ts; >>>>> clock_serv_t cclock; >>>>> mach_timespec_t mts; >>>>> host_get_clock_service(mach_host_self(), CALENDAR_CLOCK, &cclock); >>>>> clock_get_time(cclock, &mts); >>>>> mach_port_deallocate(mach_task_self(), cclock); >>>>> ts.tv_sec = mts.tv_sec; >>>>> ts.tv_nsec = mts.tv_nsec; >>>>> >>>>>- Proceed to configure, make, and install >>>>> >>>>>The new version of OSD_Chronometer.cxx is attached. >>>>> >>>>>We haven't built or tested CGM on top of this, but that's next. >>>>> >>>>>- tim >>>>> >>>>>-- >>>>>================================================================ >>>>>"You will keep in perfect peace him whose mind is >>>>> steadfast, because he trusts in you." Isaiah 26:3 >>>>> >>>>> Tim Tautges Argonne National Laboratory >>>>> (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) >>>>>phone (gvoice): (608) 354-1459 1500 Engineering Dr. >>>>> fax: (608) 263-4499 Madison, WI 53706 >>>>> >>>>> >>>>> >>>>> >>> >>> >>> > > >

1 0

Re: [cgma-dev] OCC MacOS compile successful
by Jane Hu 28 Feb '12

28 Feb '12

Hi, Rajeev, I just checked in r5411, please update your cgm to see if it fixes the problem. Jane On Mon, Feb 27, 2012 at 2:22 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: > Right, I was missing DYLD_LBRARY_PATH. CGM configures now, make runs for a > while then I get the following error: > .... > In copy constructor > 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const > BRepBuilderAPI_MakeShape&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: > error: 'TopTools_ListOfShape::TopTools_ListOfShape(const > TopTools_ListOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeShape.hxx:38: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: > In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const > BRepBuilderAPI_MakeWire&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: > note: synthesized method > 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const > BRepBuilderAPI_MakeShape&)' first required here > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx: > In copy constructor 'BRepLib_MakeShape::BRepLib_MakeShape(const > BRepLib_MakeShape&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: > error: 'TopTools_ListOfShape::TopTools_ListOfShape(const > TopTools_ListOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: > error: 'TopTools_ListOfShape::TopTools_ListOfShape(const > TopTools_ListOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: > error: 'TopTools_ListOfShape::TopTools_ListOfShape(const > TopTools_ListOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx: > In copy constructor 'BRepLib_MakeWire::BRepLib_MakeWire(const > BRepLib_MakeWire&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: > note: synthesized method 'BRepLib_MakeShape::BRepLib_MakeShape(const > BRepLib_MakeShape&)' first required here > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_MapOfShape.hxx:88: > error: 'TopTools_MapOfShape::TopTools_MapOfShape(const > TopTools_MapOfShape&)' is private > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: > error: within this context > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: > In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const > BRepBuilderAPI_MakeWire&)': > /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: > note: synthesized method 'BRepLib_MakeWire::BRepLib_MakeWire(const > BRepLib_MakeWire&)' first required here > OCCModifyEngine.cpp: In member function 'CubitStatus > OCCModifyEngine::do_loft(BRepOffsetAPI_ThruSections&, > DLIList<DLIList<TopoDS_Edge*>*>) const': > OCCModifyEngine.cpp:952: note: synthesized method > 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const > BRepBuilderAPI_MakeWire&)' first required here > make[4]: *** [OCCModifyEngine.lo] Error 1 > make[3]: *** [all-recursive] Error 1 > make[2]: *** [all] Error 2 > make[1]: *** [all-recursive] Error 1 > make: *** [all] Error 2 > > > Rajeev > > ------------------------------ > *From:* Jane Hu <janejhu(a)gmail.com> > *To:* Rajeev Jain <jain(a)mcs.anl.gov> > *Cc:* Tim Tautges <tautges(a)mcs.anl.gov>; CGMA Development < > cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> > *Sent:* Monday, February 27, 2012 9:42 AM > *Subject:* Re: [cgma-dev] OCC MacOS compile successful > > Hi, Rajeev: > > It's good news that you are able to build OCC in Mac! > > I saw this error before too in building CGM on OCC on Linux. However, it > turned out to be a set up problem. Can you look at config.log, and check if > it said that you are using the correctly OCC library? You have to set the > LD_LIBRARY_PATH to include your new build directory. > > Hope it helps. > > Jane > > On Fri, Feb 24, 2012 at 12:21 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: > > Thanks, James. > I was able to build OCC. Did you get CGM to work? > Configuring CGM I get this: > checking if OpenCascade requires -lpthread... configure: error: Cannot > link libTKKernel with Standard_Mutex > > Rajeev > > ------------------------------ > *From:* Tim Tautges <tautges(a)mcs.anl.gov> > *To:* CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges < > jamesdtautges(a)gmail.com> > *Sent:* Friday, January 6, 2012 9:10 AM > *Subject:* [cgma-dev] OCC MacOS compile successful > > Hi all, > Good news, last night my son James, hacker extraordinaire, got OCC 6.5.2 > to compile successfully on MacOS. The details: > > - Snow leopard, gcc4.2, OCC6.5.2 (straight from the OCC download page) > - Besides the following changes, follow the steps on > http://opencascade.blogspot.com/2010/04/porting-on-macos.html > - Run "autoreconf -fi" in the ros folder and then "aclocal", "automake", > and "autoconf" > > - Add the following code to the platform specific part of > ros/src/OSD/OSD_Chronometer.cxx: > #ifdef __MACH__ > # include <time.h> > # include <sys/time.h> > # include <mach/clock.h> > # include <mach/mach.h> > #endif > > - And then add this code to the OSD_Chronometer::GetThreadCPU function: > #elif defined(__MACH__) > struct timespec ts; > clock_serv_t cclock; > mach_timespec_t mts; > host_get_clock_service(mach_host_self(), CALENDAR_CLOCK, &cclock); > clock_get_time(cclock, &mts); > mach_port_deallocate(mach_task_self(), cclock); > ts.tv_sec = mts.tv_sec; > ts.tv_nsec = mts.tv_nsec; > > - Proceed to configure, make, and install > > The new version of OSD_Chronometer.cxx is attached. > > We haven't built or tested CGM on top of this, but that's next. > > - tim > > -- > ================================================================ > "You will keep in perfect peace him whose mind is > steadfast, because he trusts in you." Isaiah 26:3 > > Tim Tautges Argonne National Laboratory > (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) > phone (gvoice): (608) 354-1459 1500 Engineering Dr. > fax: (608) 263-4499 Madison, WI 53706 > > > > > > >

1 0

r5411 - cgm/trunk/geom/OCC
by jiangtao_ma＠yahoo.com 28 Feb '12

28 Feb '12

Author: janehu Date: 2012-02-28 10:27:09 -0600 (Tue, 28 Feb 2012) New Revision: 5411 Modified: cgm/trunk/geom/OCC/OCCModifyEngine.cpp Log: Trying to fix the error found in Mac build for CGM on OCC. Modified: cgm/trunk/geom/OCC/OCCModifyEngine.cpp =================================================================== --- cgm/trunk/geom/OCC/OCCModifyEngine.cpp 2012-02-23 19:26:20 UTC (rev 5410) +++ cgm/trunk/geom/OCC/OCCModifyEngine.cpp 2012-02-28 16:27:09 UTC (rev 5411) @@ -933,10 +933,10 @@ CubitStatus OCCModifyEngine::do_loft(BRepOffsetAPI_ThruSections& loft, DLIList<DLIList<TopoDS_Edge*>*> loops) const { - BRepBuilderAPI_MakeWire aWire; TopoDS_Edge new_edge; for(int i = 0; i < loops.size(); i++) { + BRepBuilderAPI_MakeWire aWire; DLIList<TopoDS_Edge*> edges = *(loops.get_and_step()); for(int j = 0; j < edges.size(); j++) @@ -949,7 +949,6 @@ aWire.Add(new_edge); } loft.AddWire(aWire.Wire()); - aWire = BRepBuilderAPI_MakeWire(); } loft.Build(); if(!loft.IsDone())

1 0

Re: [cgma-dev] OCC MacOS compile successful
by Rajeev Jain 27 Feb '12

27 Feb '12

Right, I was missing DYLD_LBRARY_PATH. CGM configures now, make runs for a while then I get the following error: .... In copy constructor 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const BRepBuilderAPI_MakeShape&)': /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeShape.hxx:38: error: within this context /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const BRepBuilderAPI_MakeWire&)': /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: note: synthesized method 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const BRepBuilderAPI_MakeShape&)' first required here /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx: In copy constructor 'BRepLib_MakeShape::BRepLib_MakeShape(const BRepLib_MakeShape&)': /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: error: within this context /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: error: within this context /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: error: within this context /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx: In copy constructor 'BRepLib_MakeWire::BRepLib_MakeWire(const BRepLib_MakeWire&)': /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: note: synthesized method 'BRepLib_MakeShape::BRepLib_MakeShape(const BRepLib_MakeShape&)' first required here /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_MapOfShape.hxx:88: error: 'TopTools_MapOfShape::TopTools_MapOfShape(const TopTools_MapOfShape&)' is private /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: error: within this context /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const BRepBuilderAPI_MakeWire&)': /Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: note: synthesized method 'BRepLib_MakeWire::BRepLib_MakeWire(const BRepLib_MakeWire&)' first required here OCCModifyEngine.cpp: In member function 'CubitStatus OCCModifyEngine::do_loft(BRepOffsetAPI_ThruSections&, DLIList<DLIList<TopoDS_Edge*>*>) const': OCCModifyEngine.cpp:952: note: synthesized method 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const BRepBuilderAPI_MakeWire&)' first required here make[4]: *** [OCCModifyEngine.lo] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Rajeev >________________________________ > From: Jane Hu <janejhu(a)gmail.com> >To: Rajeev Jain <jain(a)mcs.anl.gov> >Cc: Tim Tautges <tautges(a)mcs.anl.gov>; CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >Sent: Monday, February 27, 2012 9:42 AM >Subject: Re: [cgma-dev] OCC MacOS compile successful > > >Hi, Rajeev: > >It's good news that you are able to build OCC in Mac! > >I saw this error before too in building CGM on OCC on Linux. However, it turned out to be a set up problem. Can you look at config.log, and check if it said that you are using the correctly OCC library? You have to set the LD_LIBRARY_PATH to include your new build directory. > >Hope it helps. > >Jane > > >On Fri, Feb 24, 2012 at 12:21 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: > >Thanks, James. >>I was able to build OCC. Did you get CGM to work? >>Configuring CGM I get this: >>checking if OpenCascade requires -lpthread... configure: error: Cannot link libTKKernel with Standard_Mutex >> >> >>Rajeev >> >> >> >>>________________________________ >>> From: Tim Tautges <tautges(a)mcs.anl.gov> >>>To: CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >>>Sent: Friday, January 6, 2012 9:10 AM >>>Subject: [cgma-dev] OCC MacOS compile successful >>> >>> >>>Hi all, >>> Good news, last night my son James, hacker extraordinaire, got OCC 6.5.2 to compile successfully on MacOS. The details: >>> >>>- Snow leopard, gcc4.2, OCC6.5.2 (straight from the OCC download page) >>>- Besides the following changes, follow the steps on http://opencascade.blogspot.com/2010/04/porting-on-macos.html >>>- Run "autoreconf -fi" in the ros folder and then "aclocal", "automake", and "autoconf" >>> >>>- Add the following code to the platform specific part of ros/src/OSD/OSD_Chronometer.cxx: >>>#ifdef __MACH__ >>># include <time.h> >>># include <sys/time.h> >>># include <mach/clock.h> >>># include <mach/mach.h> >>>#endif >>> >>>- And then add this code to the OSD_Chronometer::GetThreadCPU function: >>>#elif defined(__MACH__) >>> struct timespec ts; >>> clock_serv_t cclock; >>> mach_timespec_t mts; >>> host_get_clock_service(mach_host_self(), CALENDAR_CLOCK, &cclock); >>> clock_get_time(cclock, &mts); >>> mach_port_deallocate(mach_task_self(), cclock); >>> ts.tv_sec = mts.tv_sec; >>> ts.tv_nsec = mts.tv_nsec; >>> >>>- Proceed to configure, make, and install >>> >>>The new version of OSD_Chronometer.cxx is attached. >>> >>>We haven't built or tested CGM on top of this, but that's next. >>> >>>- tim >>> >>>-- >>>================================================================ >>>"You will keep in perfect peace him whose mind is >>> steadfast, because he trusts in you." Isaiah 26:3 >>> >>> Tim Tautges Argonne National Laboratory >>> (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) >>>phone (gvoice): (608) 354-1459 1500 Engineering Dr. >>> fax: (608) 263-4499 Madison, WI 53706 >>> >>> >>> >>> > > >

1 0

Re: [cgma-dev] OCC MacOS compile successful
by Jane Hu 27 Feb '12

27 Feb '12

Hi, Rajeev: It's good news that you are able to build OCC in Mac! I saw this error before too in building CGM on OCC on Linux. However, it turned out to be a set up problem. Can you look at config.log, and check if it said that you are using the correctly OCC library? You have to set the LD_LIBRARY_PATH to include your new build directory. Hope it helps. Jane On Fri, Feb 24, 2012 at 12:21 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: > Thanks, James. > I was able to build OCC. Did you get CGM to work? > Configuring CGM I get this: > checking if OpenCascade requires -lpthread... configure: error: Cannot > link libTKKernel with Standard_Mutex > > Rajeev > > ------------------------------ > *From:* Tim Tautges <tautges(a)mcs.anl.gov> > *To:* CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges < > jamesdtautges(a)gmail.com> > *Sent:* Friday, January 6, 2012 9:10 AM > *Subject:* [cgma-dev] OCC MacOS compile successful > > Hi all, > Good news, last night my son James, hacker extraordinaire, got OCC 6.5.2 > to compile successfully on MacOS. The details: > > - Snow leopard, gcc4.2, OCC6.5.2 (straight from the OCC download page) > - Besides the following changes, follow the steps on > http://opencascade.blogspot.com/2010/04/porting-on-macos.html > - Run "autoreconf -fi" in the ros folder and then "aclocal", "automake", > and "autoconf" > > - Add the following code to the platform specific part of > ros/src/OSD/OSD_Chronometer.cxx: > #ifdef __MACH__ > # include <time.h> > # include <sys/time.h> > # include <mach/clock.h> > # include <mach/mach.h> > #endif > > - And then add this code to the OSD_Chronometer::GetThreadCPU function: > #elif defined(__MACH__) > struct timespec ts; > clock_serv_t cclock; > mach_timespec_t mts; > host_get_clock_service(mach_host_self(), CALENDAR_CLOCK, &cclock); > clock_get_time(cclock, &mts); > mach_port_deallocate(mach_task_self(), cclock); > ts.tv_sec = mts.tv_sec; > ts.tv_nsec = mts.tv_nsec; > > - Proceed to configure, make, and install > > The new version of OSD_Chronometer.cxx is attached. > > We haven't built or tested CGM on top of this, but that's next. > > - tim > > -- > ================================================================ > "You will keep in perfect peace him whose mind is > steadfast, because he trusts in you." Isaiah 26:3 > > Tim Tautges Argonne National Laboratory > (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) > phone (gvoice): (608) 354-1459 1500 Engineering Dr. > fax: (608) 263-4499 Madison, WI 53706 > > > >

1 0

Re: [cgma-dev] OCC MacOS compile successful
by Rajeev Jain 24 Feb '12

24 Feb '12

Thanks, James. I was able to build OCC. Did you get CGM to work? Configuring CGM I get this: checking if OpenCascade requires -lpthread... configure: error: Cannot link libTKKernel with Standard_Mutex Rajeev >________________________________ > From: Tim Tautges <tautges(a)mcs.anl.gov> >To: CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >Sent: Friday, January 6, 2012 9:10 AM >Subject: [cgma-dev] OCC MacOS compile successful > >Hi all, > Good news, last night my son James, hacker extraordinaire, got OCC 6.5.2 to compile successfully on MacOS. The details: > >- Snow leopard, gcc4.2, OCC6.5.2 (straight from the OCC download page) >- Besides the following changes, follow the steps on http://opencascade.blogspot.com/2010/04/porting-on-macos.html >- Run "autoreconf -fi" in the ros folder and then "aclocal", "automake", and "autoconf" > >- Add the following code to the platform specific part of ros/src/OSD/OSD_Chronometer.cxx: >#ifdef __MACH__ ># include <time.h> ># include <sys/time.h> ># include <mach/clock.h> ># include <mach/mach.h> >#endif > >- And then add this code to the OSD_Chronometer::GetThreadCPU function: >#elif defined(__MACH__) > struct timespec ts; > clock_serv_t cclock; > mach_timespec_t mts; > host_get_clock_service(mach_host_self(), CALENDAR_CLOCK, &cclock); > clock_get_time(cclock, &mts); > mach_port_deallocate(mach_task_self(), cclock); > ts.tv_sec = mts.tv_sec; > ts.tv_nsec = mts.tv_nsec; > >- Proceed to configure, make, and install > >The new version of OSD_Chronometer.cxx is attached. > >We haven't built or tested CGM on top of this, but that's next. > >- tim > >-- >================================================================ >"You will keep in perfect peace him whose mind is > steadfast, because he trusts in you." Isaiah 26:3 > > Tim Tautges Argonne National Laboratory > (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) >phone (gvoice): (608) 354-1459 1500 Engineering Dr. > fax: (608) 263-4499 Madison, WI 53706 > > > >

1 0

r5399 - cgm/trunk/itaps
by iulian＠mcs.anl.gov 16 Feb '12

16 Feb '12

Author: iulian Date: 2012-02-16 13:57:19 -0600 (Thu, 16 Feb 2012) New Revision: 5399 Modified: cgm/trunk/itaps/iGeom_CGMA.cc Log: uninitialized return, found with valgrind Modified: cgm/trunk/itaps/iGeom_CGMA.cc =================================================================== --- cgm/trunk/itaps/iGeom_CGMA.cc 2012-02-16 19:28:07 UTC (rev 5398) +++ cgm/trunk/itaps/iGeom_CGMA.cc 2012-02-16 19:57:19 UTC (rev 5399) @@ -6569,6 +6569,7 @@ this_surf = this_face->get_surface_ptr(); if (NULL == this_surf) return CUBIT_FAILURE; this_surf->closest_point_trimmed( near, on ); + status = CUBIT_SUCCESS; break; default: // just copy over the coordinates

1 0

r5396 - cgm/branches/cubit13.1/geom
by jiangtao_ma＠yahoo.com 13 Feb '12

13 Feb '12

Author: janehu Date: 2012-02-13 11:52:57 -0600 (Mon, 13 Feb 2012) New Revision: 5396 Removed: cgm/branches/cubit13.1/geom/ACIS/ Log: Keep ACIS directory dummy for now.

1 0

r5395 - in cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib: . CMakeModules incl src
by jiangtao_ma＠yahoo.com 13 Feb '12

13 Feb '12

Author: janehu Date: 2012-02-13 10:25:55 -0600 (Mon, 13 Feb 2012) New Revision: 5395 Added: cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/CMakeLists.txt cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/CMakeModules/FindACIS.cmake cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/Makefile cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/Makefile.Linux cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/Makefile.SunOS cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/incl/attrib_edge_parametric_length.h cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/incl/attrib_gtc.h cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/incl/attrib_gtc_export.h cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/incl/attrib_mark.h cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/incl/attrib_name.h cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/incl/gtcAttrib_exConst.h cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/src/attrib_edge_parametric_length.C cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/src/attrib_gtc.C cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/src/attrib_mark.C cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/src/attrib_name.C Log: Move ACIS files to ACIS_SRC. Added: cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/CMakeLists.txt =================================================================== --- cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/CMakeLists.txt (rev 0) +++ cgm/branches/cubit13.1/geom/ACIS_SRC/gtcAttrib/CMakeLists.txt 2012-02-13 16:25:55 UTC (rev 5395) @@ -0,0 +1,134 @@ + +PROJECT(gtcAttrib) +IF(IGTO_BUILD) + +SET(gtcAttrib_MAJOR_VERSION 1 + CACHE STRING "gtcAttrib Major Library Version" FORCE) +SET(gtcAttrib_MINOR_VERSION 0 + CACHE STRING "gtcAttrib Minor Library Version" FORCE) +SET(gtcAttrib_VERSION + "${gtcAttrib_MAJOR_VERSION}.${gtcAttrib_MINOR_VERSION}" + CACHE STRING "gtcAttrib Library Version" FORCE) +#SET (gtcAttrib_VERSION 1.0 CACHE STRING "Library Version" FORCE) + +# Disallow in-source build +STRING(COMPARE EQUAL "${gtcAttrib_SOURCE_DIR}" + "${gtcAttrib_BINARY_DIR}" INSOURCE) +IF(INSOURCE) + MESSAGE(SEND_ERROR "Build directory ${gtcAttrib_BINARY_DIR}") + MESSAGE(SEND_ERROR "Source directory ${gtcAttrib_SOURCE_DIR}") + MESSAGE(FATAL_ERROR "gtcAttrib requires an out of source Build. Please create a separate binary directory and run CMake there.") +ENDIF(INSOURCE) + +# set our CMAKE_MODULE_PATH to include the one specific to this project +SET (CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${PROJECT_SOURCE_DIR}/CMakeModules ) + +SET (GTC_ATTRIB_SRCS + src/attrib_edge_parametric_length.C + src/attrib_gtc.C + src/attrib_mark.C + src/attrib_name.C + ) + +# check to see if we have the standard namespace +INCLUDE (TestForSTDNamespace) +IF (CMAKE_STD_NAMESPACE) + ADD_DEFINITIONS(-DHAVE_STD) +ENDIF (CMAKE_STD_NAMESPACE) + +# Find the acis libraries + +INCLUDE (FindACIS) +FindACIS(17) + +IF (ACIS_FOUND) + # add acis includes to current project + INCLUDE_DIRECTORIES(${ACIS_INCLUDE_DIR} ${gtcAttrib_SOURCE_DIR}/incl)

1 0