January 2012 - cgma-dev - mailman3.cels.anl.gov

r5358 - cgm/trunk/test
by jiangtao_ma＠yahoo.com 31 Jan '12

31 Jan '12

Author: janehu Date: 2012-01-31 12:31:42 -0600 (Tue, 31 Jan 2012) New Revision: 5358 Added: cgm/trunk/test/offset_curves.cpp Modified: cgm/trunk/test/Makefile.am Log: Added test for offset curve operation. Modified: cgm/trunk/test/Makefile.am =================================================================== --- cgm/trunk/test/Makefile.am 2012-01-31 18:28:16 UTC (rev 5357) +++ cgm/trunk/test/Makefile.am 2012-01-31 18:31:42 UTC (rev 5358) @@ -22,7 +22,7 @@ endif endif if build_OCC - TESTS += attribute_to_file attribute_to_buffer modify subtract makept r_w test_occ operation brick_occ merge_occ point_project imprint_bug + TESTS += attribute_to_file attribute_to_buffer modify subtract makept offset_curves r_w test_occ operation brick_occ merge_occ point_project imprint_bug endif check_PROGRAMS = $(TESTS) @@ -36,6 +36,7 @@ point_project_CPPFLAGS = $(CPPFLAGS) $(AM_CPPFLAGS) '-DTEST_ENGINE="ACIS"' makept_SOURCES = makept.cpp +offset_curves_SOURCES = offset_curves.cpp modify_SOURCES = modify.cpp imprint_bug_SOURCES = imprint_bug.cpp subtract_SOURCES = subtract.cpp @@ -137,6 +138,7 @@ fillet.occ \ imprint.brep \ BsplineCurve.occ \ + curves.brep \ bug.brep \ subtract.occ \ glue.occ \ Added: cgm/trunk/test/offset_curves.cpp =================================================================== --- cgm/trunk/test/offset_curves.cpp (rev 0) +++ cgm/trunk/test/offset_curves.cpp 2012-01-31 18:31:42 UTC (rev 5358) @@ -0,0 +1,279 @@ +/** + * \file makept.cpp + * + * \brief makept, another simple C++ driver for CGM + * + * This program acts as a simple driver for CGM. It reads in a geometry, + * and performs varies checks for bodies, surfaces, curves and vertices. + */ + +#undef NDEBUG +#include <cassert> + +#include "GeometryModifyEngine.hpp" +#include "GeometryModifyTool.hpp" +#include "GeometryQueryTool.hpp" +#include "CubitMessage.hpp"

1 0

r5357 - cgm/trunk/geom/OCC
by jiangtao_ma＠yahoo.com 31 Jan '12

31 Jan '12

Author: janehu Date: 2012-01-31 12:28:16 -0600 (Tue, 31 Jan 2012) New Revision: 5357 Removed: cgm/trunk/geom/OCC/OCCModifyEngine.cpp_5317 cgm/trunk/geom/OCC/OCCModifyEngine.cpp_5345 Modified: cgm/trunk/geom/OCC/OCCModifyEngine.cpp Log: A little change according to tests results. Modified: cgm/trunk/geom/OCC/OCCModifyEngine.cpp =================================================================== --- cgm/trunk/geom/OCC/OCCModifyEngine.cpp 2012-01-31 15:48:01 UTC (rev 5356) +++ cgm/trunk/geom/OCC/OCCModifyEngine.cpp 2012-01-31 18:28:16 UTC (rev 5357) @@ -6507,10 +6507,10 @@ int gap_type ) { //gap_type has no effect here. - gp_Dir offset(offset_direction.x(), offset_direction.y(), offset_direction.z()); if( curves.size() == 1 && (offset_direction.x() || offset_direction.y() || offset_direction.z()) ) { + gp_Dir offset(offset_direction.x(), offset_direction.y(), offset_direction.z()); //check if the curve is straight, error out for non-straight curve. Curve* curve = curves.get(); OCCCurve* occ_curve = CAST_TO(curve, OCCCurve); @@ -6551,6 +6551,20 @@ else if( offset_direction.x() || offset_direction.y() || offset_direction.z() ) PRINT_WARNING( "Direction qualifier ignored - only valid for one straight curve\n" ); + else if (offset_direction.x() == 0.0 && offset_direction.y() == 0.0 && + offset_direction.z() == 0.0) + { + for(int i = 0 ; i < curves.size(); i++) + { + Curve* curve = curves.get_and_step(); + OCCCurve* occ_curve = CAST_TO(curve, OCCCurve); + if(occ_curve->geometry_type() == STRAIGHT_CURVE_TYPE) + { + PRINT_ERROR("Must have an offset direction for any straight curve.\n"); + return CUBIT_FAILURE; + } + } + } //make wire out of ref_edge_list BRepBuilderAPI_MakeWire awire; TopTools_ListOfShape L; @@ -6609,12 +6623,7 @@ Ex.Init(wire); Ex.Next(); //omit the connecting curve - if(offset_distance < 0) - { - for(int i = 0 ; i < curves.size(); i++) - Ex.Next();//omit all positive offset curves. - Ex.Next(); //omit conection curve - } + for(int i = 0 ; i < curves.size(); i++) { TopoDS_Edge new_edge = Ex.Current();

1 0

r5356 - cgm/trunk/geom/OCC
by jiangtao_ma＠yahoo.com 31 Jan '12

31 Jan '12

Author: janehu Date: 2012-01-31 09:48:01 -0600 (Tue, 31 Jan 2012) New Revision: 5356 Added: cgm/trunk/geom/OCC/OCCModifyEngine.cpp_5317 cgm/trunk/geom/OCC/OCCModifyEngine.cpp_5345 Modified: cgm/trunk/geom/OCC/OCCBody.cpp cgm/trunk/geom/OCC/OCCCurve.cpp cgm/trunk/geom/OCC/OCCModifyEngine.cpp cgm/trunk/geom/OCC/OCCPoint.cpp cgm/trunk/geom/OCC/OCCShell.cpp Log: Added offset non-straight curve functionality to OCC according to ACIS implementation. Currently code works this way: Straight curve will offset according to offset-distance and offset-direction. A non-straight curve will not honor offset-direction, rather give a warning of it, just as ACIS. All input curves will be chained to form a wire to offset, if the wire is not obtainable for all curves, code will error out as in ACIS. Closed curve(s) will be offset based on distance, positive distance will offset to outside and negative distance will offset to inside. The number of curves may be more than the original input if it's a closed spline. Open curve(s) will be tricky, since the opencascade code offset the curves both ways and connected the end into a closed wire. CGM has to determine which curves are the needed, hopefully it works out correctly. However, if original curve causes more than one offset curves in the same direction, code will be errored out. Passed new added tests, will be committed. Modified: cgm/trunk/geom/OCC/OCCBody.cpp =================================================================== --- cgm/trunk/geom/OCC/OCCBody.cpp 2012-01-30 20:21:58 UTC (rev 5355) +++ cgm/trunk/geom/OCC/OCCBody.cpp 2012-01-31 15:48:01 UTC (rev 5356) @@ -522,9 +522,9 @@ TopoDS_Compound compsolid; TopoDS_Shape shape; + shape = aBRepTrsf->Shape(); if(aBRepTrsf && myTopoDSShape) { - shape = aBRepTrsf->ModifiedShape(*myTopoDSShape); compsolid = TopoDS::Compound(shape); if(OCCQueryEngine::instance()->OCCMap->IsBound(*myTopoDSShape) ) Modified: cgm/trunk/geom/OCC/OCCCurve.cpp =================================================================== --- cgm/trunk/geom/OCC/OCCCurve.cpp 2012-01-30 20:21:58 UTC (rev 5355) +++ cgm/trunk/geom/OCC/OCCCurve.cpp 2012-01-31 15:48:01 UTC (rev 5356) @@ -954,19 +954,9 @@ assert(aBRepTrsf != NULL || op != NULL); TopoDS_Shape shape; - BRepBuilderAPI_Transform* pTrsf = NULL; - BRepBuilderAPI_GTransform* gTrsf = NULL; if(aBRepTrsf) - { - pTrsf = (BRepBuilderAPI_Transform*)aBRepTrsf; - if(!pTrsf) - { - gTrsf = (BRepBuilderAPI_GTransform*)aBRepTrsf; - shape = gTrsf->ModifiedShape(*get_TopoDS_Edge()); - } - else - shape = pTrsf->ModifiedShape(*get_TopoDS_Edge()); - } + shape = aBRepTrsf->ModifiedShape(*get_TopoDS_Edge()); + else { TopTools_ListOfShape shapes; Modified: cgm/trunk/geom/OCC/OCCModifyEngine.cpp =================================================================== --- cgm/trunk/geom/OCC/OCCModifyEngine.cpp 2012-01-30 20:21:58 UTC (rev 5355) +++ cgm/trunk/geom/OCC/OCCModifyEngine.cpp 2012-01-31 15:48:01 UTC (rev 5356) @@ -24,6 +24,7 @@ #include "gp_Cone.hxx" #include "gp_Sphere.hxx" #include "gp_Torus.hxx"

1 0

r5346 - cgm/trunk/geom/OCC
by jiangtao_ma＠yahoo.com 25 Jan '12

25 Jan '12

Author: janehu Date: 2012-01-25 12:36:13 -0600 (Wed, 25 Jan 2012) New Revision: 5346 Modified: cgm/trunk/geom/OCC/OCCLump.cpp Log: Removed the debug version of OCCLump.cpp, left the simple code for it. Modified: cgm/trunk/geom/OCC/OCCLump.cpp =================================================================== --- cgm/trunk/geom/OCC/OCCLump.cpp 2012-01-25 18:33:53 UTC (rev 5345) +++ cgm/trunk/geom/OCC/OCCLump.cpp 2012-01-25 18:36:13 UTC (rev 5346) @@ -374,24 +374,12 @@ assert(aBRepTrsf != NULL || op != NULL); TopoDS_Shape shape; - TopTools_ListOfShape shapes; - if(aBRepTrsf) - { - shapes = aBRepTrsf->Modified(*get_TopoDS_Solid()); - if(shapes.Extent() == 1) - shape = shapes.First(); - else - { - PRINT_ERROR("Tranformation is wrong. \n"); - return CUBIT_FAILURE; - } - } - - //shape = aBRepTrsf->ModifiedShape(*get_TopoDS_Solid()); + shape = aBRepTrsf->ModifiedShape(*get_TopoDS_Solid()); else { + TopTools_ListOfShape shapes; shapes.Assign(op->Modified(*get_TopoDS_Solid())); if(shapes.Extent() == 0) shapes.Assign(op->Generated(*get_TopoDS_Solid()));

1 0

r5345 - cgm/trunk/geom/OCC
by jiangtao_ma＠yahoo.com 25 Jan '12

25 Jan '12

Author: janehu Date: 2012-01-25 12:33:53 -0600 (Wed, 25 Jan 2012) New Revision: 5345 Added: cgm/trunk/geom/OCC/occ_patches_6.5.2 Modified: cgm/trunk/geom/OCC/OCCLump.cpp cgm/trunk/geom/OCC/OCCModifyEngine.cpp Log: Updated for build with Opencascade6.5.2. Passed make check in cgm. Modified: cgm/trunk/geom/OCC/OCCLump.cpp =================================================================== --- cgm/trunk/geom/OCC/OCCLump.cpp 2012-01-24 22:23:45 UTC (rev 5344) +++ cgm/trunk/geom/OCC/OCCLump.cpp 2012-01-25 18:33:53 UTC (rev 5345) @@ -374,12 +374,24 @@ assert(aBRepTrsf != NULL || op != NULL); TopoDS_Shape shape; + TopTools_ListOfShape shapes; + if(aBRepTrsf) - shape = aBRepTrsf->ModifiedShape(*get_TopoDS_Solid()); + { + shapes = aBRepTrsf->Modified(*get_TopoDS_Solid()); + if(shapes.Extent() == 1) + shape = shapes.First(); + else + { + PRINT_ERROR("Tranformation is wrong. \n"); + return CUBIT_FAILURE; + } + } + + //shape = aBRepTrsf->ModifiedShape(*get_TopoDS_Solid()); else { - TopTools_ListOfShape shapes; shapes.Assign(op->Modified(*get_TopoDS_Solid())); if(shapes.Extent() == 0) shapes.Assign(op->Generated(*get_TopoDS_Solid())); Modified: cgm/trunk/geom/OCC/OCCModifyEngine.cpp =================================================================== --- cgm/trunk/geom/OCC/OCCModifyEngine.cpp 2012-01-24 22:23:45 UTC (rev 5344) +++ cgm/trunk/geom/OCC/OCCModifyEngine.cpp 2012-01-25 18:33:53 UTC (rev 5345) @@ -113,6 +113,10 @@ #include "TopOpeBRep_EdgesIntersector.hxx" #include "TopExp_Explorer.hxx" #include "TopExp.hxx" +#ifndef OCC_VERSION_MINOR +#include "Standard_Version.hxx" +#endif + #include "OCCDrawTool.hpp" #include "OCCModifyEngine.hpp" #include "OCCQueryEngine.hpp" @@ -703,7 +707,11 @@ radius2 = height * tan(fabs(semi_angle)); Handle(Geom_RectangularTrimmedSurface) trimmed_cone; trimmed_cone = GC_MakeTrimmedCone(Apex, p2, 0, radius2);

1 0

Re: [cgma-dev] buildbot failure in cgm-shared: failed compile test
by James Porter 24 Jan '12

24 Jan '12

On Tue, 2012-01-24 at 10:32 -0600, Iulian Grindeanu wrote: > I think it is a clean build, so I am surprised it fails. Could be that > a "make distclean" is needed in this case? I think we do "make clean" > in the build space. Should be fixed. The buildbot will now run `make distclean` on all the builds now.

1 0

Re: [cgma-dev] buildbot failure in cgm-shared: failed compile test
by Iulian Grindeanu 24 Jan '12

24 Jan '12

Hello, This failed build refers to a cubit 12.2 based CGM, shared, not to an occ build. Still, I have no errors in cubit based build, either. The error refers also to an executable that is built only, not tested (itaps/chaman) I think it is a clean build, so I am surprised it fails. Could be that a "make distclean" is needed in this case? I think we do "make clean" in the build space. Iulian ... make[5]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/itaps' g++ -DHAVE_CONFIG_H -I. -I.. -I../geom/parallel -I../geom -DLITTLE_ENDIAN=BYTE_ORDER -DTEMPLATE_DEFS_INCLUDED -DHAVE_ACIS -DSRCDIR=. -I../util -I../geom -I../init -Wall -pipe -pedantic -O2 -DNDEBUG -MT chaman.o -MD -MP -MF .deps/chaman.Tpo -c -o chaman.o chaman.cc mv -f .deps/chaman.Tpo .deps/chaman.Po /bin/sh ../libtool --tag=CXX --mode=link g++ -Wall -pipe -pedantic -O2 -DNDEBUG -R/home/fathom/3rdparty/cubit/Cubit64/Cubit-12.2/bin -L/home/fathom/3rdparty/cubit/Cubit64/Cubit-12.2/bin -o chaman chaman.o libiGeom.la -lm libtool: link: g++ -Wall -pipe -pedantic -O2 -DNDEBUG -o .libs/chaman chaman.o -L/home/fathom/3rdparty/cubit/Cubit64/Cubit-12.2/bin ./.libs/libiGeom.so -lm -Wl,-rpath -Wl,/home/fathom/libs/current/cgm-shared/lib -Wl,-rpath -Wl,/home/fathom/3rdparty/cubit/Cubit64/Cubit-12.2/bin ./.libs/libiGeom.so: undefined reference to `CubitCompat_import_solid_model(char const*, char const*, char const*, bool, bool, bool, bool, bool, bool, DLIList<RefEntity*>*)' /home/fathom/libs/current/cgm-shared/lib/libcgm.so.0: undefined reference to `GeometryQueryTool::export_solid_model(DLIList<RefEntity*>&, char const*, Model_File_Type, int&, CubitString const&, char const*, char const*)' ./.libs/libiGeom.so: undefined reference to `CubitCompat_export_solid_model(DLIList<RefEntity*>&, char const*, char const*, int&, CubitString const&, char const*)' ----- Original Message ----- | I've double checked by re-checked out the cgm trunk and build with | Opencascade6.5.1. It built ok and passed cgm make check. I am not sure | where the problem is. Someone has any thought? | Jane | On Tue, Jan 24, 2012 at 12:59 AM, < cgma-dev(a)mcs.anl.gov > wrote: | | Fathom : cgm-shared build #690 | | Results: failed compile test | | Buildslave: gnep | | Revision: None | | Reason: The Nightly scheduler named 'cgm-shared-nightly' triggered | | this build Log Excerpt | | in a given directory, LIBDIR, you must either use libtool, and | | specify the full pathname of the library, or use the `-LLIBDIR' | | flag during linking and do at least one of the following: | | - add LIBDIR to the `LD_LIBRARY_PATH' environment variable | | during execution | | - add LIBDIR to the `LD_RUN_PATH' environment variable | | during linking | | - use the `-Wl,-rpath -Wl,LIBDIR' linker flag | | - have your system administrator add LIBDIR to `/etc/ld.so.conf' | | See any operating system documentation about shared libraries for | | more information, such as the ld(1) and ld.so(8) manual pages. | | ---------------------------------------------------------------------- | | test -z "/home/fathom/libs/current/cgm-shared/lib" || /bin/mkdir -p | | "/home/fathom/libs/current/cgm-shared/lib" | | /usr/bin/install -c -m 644 iGeom-Defs.inc | | '/home/fathom/libs/current/cgm-shared/lib' | | test -z "/home/fathom/libs/current/cgm-shared/include" || /bin/mkdir | | -p "/home/fathom/libs/current/cgm-shared/include" | | /usr/bin/install -c -m 644 iBase.h iGeom.h iGeom_FCDefs.h | | iGeom_protos.h iBase_f.h iGeom_f.h | | '/home/fathom/libs/current/cgm-shared/include' | | make install-data-hook | | make[6]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/itaps' | | echo "IGEOM_CXX_LDFLAGS = | | -L/home/fathom/libs/current/cgm-shared/lib" | | >> /home/fathom/libs/current/cgm-shared/lib/iGeom-Defs.inc | | echo "IGEOM_CXX_LTFLAGS = | | -R/home/fathom/libs/current/cgm-shared/lib" | | >> /home/fathom/libs/current/cgm-shared/lib/iGeom-Defs.inc | | echo "IGEOM_INCLUDEDIR = | | /home/fathom/libs/current/cgm-shared/include" | | >> /home/fathom/libs/current/cgm-shared/lib/iGeom-Defs.inc | | echo 'IGEOM_INCLUDES = -I$(IGEOM_INCLUDEDIR)' >> | | /home/fathom/libs/current/cgm-shared/lib/iGeom-Defs.inc | | ...Making install in test | | make[2]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/test' | | make[3]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/test' | | make[3]: Nothing to be done for `install-exec-am'. | | make[3]: Nothing to be done for `install-data-am'. | | ...Making install in cgm_apps | | make[2]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/cgm_apps' | | Making install in examples | | make[3]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples' | | Making install in facetdriver | | make[4]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples/facetdriver' | | make[5]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples/facetdriver' | | make[5]: Nothing to be done for `install-exec-am'. | | make[5]: Nothing to be done for `install-data-am'. | | ...make[4]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples' | | make[5]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples' | | make[5]: Nothing to be done for `install-exec-am'. | | make[5]: Nothing to be done for `install-data-am'. | | ...make[3]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/cgm_apps' | | make[4]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/cgm_apps' | | make[4]: Nothing to be done for `install-exec-am'. | | make[4]: Nothing to be done for `install-data-am'. | | ...Making install in geom/testing | | make[2]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/geom/testing' | | make[3]: Entering directory | | `/disks/itaps-buildslave/cgm-shared/build/geom/testing' | | make[3]: Nothing to be done for `install-exec-am'. | | make[3]: Nothing to be done for `install-data-am'.

1 0

Re: [cgma-dev] buildbot failure in cgm-shared: failed compile test
by Jane Hu 24 Jan '12

24 Jan '12

I've double checked by re-checked out the cgm trunk and build with Opencascade6.5.1. It built ok and passed cgm make check. I am not sure where the problem is. Someone has any thought? Jane On Tue, Jan 24, 2012 at 12:59 AM, <cgma-dev(a)mcs.anl.gov> wrote: > Fathom <http://gnep.mcs.anl.gov:8010/>: cgm-shared<http://gnep.mcs.anl.gov:8010/builders/cgm-shared>build > #690 <http://gnep.mcs.anl.gov:8010/builders/cgm-shared/builds/690> * > Results:*failed compile test *Buildslave:*gnep *Revision:*None *Reason:*The > Nightly scheduler named 'cgm-shared-nightly' triggered this build Log > Excerpt > > in a given directory, LIBDIR, you must either use libtool, and > specify the full pathname of the library, or use the `-LLIBDIR' > flag during linking and do at least one of the following: > - add LIBDIR to the `LD_LIBRARY_PATH' environment variable > during execution > - add LIBDIR to the `LD_RUN_PATH' environment variable > during linking > - use the `-Wl,-rpath -Wl,LIBDIR' linker flag > - have your system administrator add LIBDIR to `/etc/ld.so.conf' > > See any operating system documentation about shared libraries for > more information, such as the ld(1) and ld.so(8) manual pages. > ---------------------------------------------------------------------- > test -z "/home/fathom/libs/current/cgm-shared/lib" || /bin/mkdir -p "/home/fathom/libs/current/cgm-shared/lib" > /usr/bin/install -c -m 644 iGeom-Defs.inc '/home/fathom/libs/current/cgm-shared/lib' > test -z "/home/fathom/libs/current/cgm-shared/include" || /bin/mkdir -p "/home/fathom/libs/current/cgm-shared/include" > /usr/bin/install -c -m 644 iBase.h iGeom.h iGeom_FCDefs.h iGeom_protos.h iBase_f.h iGeom_f.h '/home/fathom/libs/current/cgm-shared/include' > make install-data-hook > make[6]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/itaps' > echo "IGEOM_CXX_LDFLAGS = -L/home/fathom/libs/current/cgm-shared/lib" >> /home/fathom/libs/current/cgm-shared/lib/iGeom-Defs.inc > echo "IGEOM_CXX_LTFLAGS = -R/home/fathom/libs/current/cgm-shared/lib" >> /home/fathom/libs/current/cgm-shared/lib/iGeom-Defs.inc > echo "IGEOM_INCLUDEDIR = /home/fathom/libs/current/cgm-shared/include" >> /home/fathom/libs/current/cgm-shared/lib/iGeom-Defs.inc > echo 'IGEOM_INCLUDES = -I$(IGEOM_INCLUDEDIR)' >> /home/fathom/libs/current/cgm-shared/lib/iGeom-Defs.inc > ...Making install in test > make[2]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/test' > make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/test' > make[3]: Nothing to be done for `install-exec-am'. > make[3]: Nothing to be done for `install-data-am'. > ...Making install in cgm_apps > make[2]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/cgm_apps' > Making install in examples > make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples' > Making install in facetdriver > make[4]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples/facetdriver' > make[5]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples/facetdriver' > make[5]: Nothing to be done for `install-exec-am'. > make[5]: Nothing to be done for `install-data-am'. > ...make[4]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples' > make[5]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/cgm_apps/examples' > make[5]: Nothing to be done for `install-exec-am'. > make[5]: Nothing to be done for `install-data-am'. > ...make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/cgm_apps' > make[4]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/cgm_apps' > make[4]: Nothing to be done for `install-exec-am'. > make[4]: Nothing to be done for `install-data-am'. > ...Making install in geom/testing > make[2]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/geom/testing' > make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/geom/testing' > make[3]: Nothing to be done for `install-exec-am'. > make[3]: Nothing to be done for `install-data-am'. > >

1 0

r5342 - cgm/trunk/test
by jiangtao_ma＠yahoo.com 24 Jan '12

24 Jan '12

Author: janehu Date: 2012-01-24 10:01:43 -0600 (Tue, 24 Jan 2012) New Revision: 5342 Modified: cgm/trunk/test/Makefile.am Log: Getting rid of configure warnings about white space after back slash. Modified: cgm/trunk/test/Makefile.am =================================================================== --- cgm/trunk/test/Makefile.am 2012-01-23 21:31:41 UTC (rev 5341) +++ cgm/trunk/test/Makefile.am 2012-01-24 16:01:43 UTC (rev 5342) @@ -94,7 +94,7 @@ webcut.brep \ Line_1.brep \ Line_2.brep \ - stitch.name_occ \ + stitch.name_occ \ box-w-hole.brep \ Solid_6.brep \ Solid_7.brep \

1 0

buildbot failure in cgm-shared: failed compile test
by cgma-dev＠mcs.anl.gov 24 Jan '12

24 Jan '12

1 0