March 2014 - cgma-dev - mailman3.cels.anl.gov

Re: [cgma-dev] [MOAB-dev] OCC CGM testing
by Paul Wilson 25 Mar '14

25 Mar '14

Success!!! With some help from Jane, I was able to determine that it was missing dependencies for OCC that were causing the problem, namely FreeType. I think it is very important to note: OCC will identify missing dependencies during configure, but will STILL build successfully and not report any other errors. OCC doesn't actually do anything with "make check" so there is not way to know. In my case, there was a note during configure on missing "Mandatory" dependencies, but it build successfully and even allowed me to build CGM successfully. Paul On 03/25/2014 11:00 AM, Grindeanu, Iulian R. wrote: > did you build occ shared or static? > We build here shared > And then we set > LD_LIBRARY_PATH=/homes/fathom/3rdparty/occ/OpenCASCADE6.6.0/gccGnep/lib > also, the build uses cgm13.1 branch > > gnep/disks/itaps-buildslave/cgm131-occ660/build> git branch > * cgm13.1 > > It looks like you have a missing file. > > Iulian > ________________________________________ > From: Paul Wilson [wilsonp(a)engr.wisc.edu] > Sent: Tuesday, March 25, 2014 10:49 AM > To: Grindeanu, Iulian R.; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov; CGMA Development > Subject: Re: [MOAB-dev] OCC CGM testing > > Hi again, > > just looked at gnep and confirmed that make check is occurring. > > Here is my config: ../configure > --with-occ=/home/wilsonp/.local/OCC/6.6.0_patched > --prefix=/home/wilsonp/.local/cgm/13.1.1_occ660 > > Make check log: make_check_log > Errors are attached as: make_check_err > The errors are all in iTaps, so I included: test-suite.log > > I'll also try to sit with Jane to look at these. > > Paul > > > > > > > On 03/25/2014 10:40 AM, Paul Wilson wrote: >> Hi Iulian, >> >> [Adding CGM mailing list] >> >> Do you run 'make check' on buildbot? I did a clean build of OCC6.6.0 >> and CGM13.1.1 and it built successfully but failed on 'make check'. >> >> Paul >> >> On 03/25/2014 07:11 AM, Grindeanu, Iulian R. wrote: >>> hello, >>> I built occ 6.6.0 on gnep.mcs, and cgm 13.1 configured with it >>> worked fine last night >>> http://gnep.mcs.anl.gov:8010/builders/cgm131-occ660 >>> On mcs network, occ 660 is installed at: >>> /homes/fathom/3rdparty/occ/OpenCASCADE6.6.0/gccGnep >>> >>> I will update instructions on >>> http://trac.mcs.anl.gov/projects/ITAPS/wiki/BuildingOcc65 >>> >>> Jane, will all cgm branches work against occ 660? >>> (I am pretty sure master branch will work, I don't know about cgm12.2) >>> >>> Iulian >>> ________________________________________ >>> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on >>> behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov] >>> Sent: Monday, March 24, 2014 10:48 AM >>> To: Paul Wilson; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >>> Subject: Re: [MOAB-dev] OCC CGM testing >>> >>> Hi Paul, >>> occ 653 was built on gnep.mcs.anl.gov. It is not built every night, >>> as part of buildbot. gnep is at ubuntu 10.04, but I did built it on >>> my laptop successfully, too, which is 12.04 >>> >>> Maybe I don't understand the question. >>> >>> What kind of instructions? Maybe they are not up-to-date. Or the >>> patch fails to be applied ? >>> >>> Iulian >>> >>> ________________________________________ >>> From: Paul Wilson [wilsonp(a)engr.wisc.edu] >>> Sent: Monday, March 24, 2014 10:05 AM >>> To: Grindeanu, Iulian R.; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >>> Subject: Re: [MOAB-dev] OCC CGM testing >>> >>> Hi Iulian, >>> >>> I was unsuccessful in following the instructions for building OCC653 >>> with the provided patch. (Note: the instructions didn't work perfectly >>> either, but that's a different issue). >>> >>> Can you provide the script or automated instructions that are used to >>> build this on buildbot? >>> >>> Paul >>> >>> On 03/21/2014 10:09 AM, Grindeanu, Iulian R. wrote: >>>> http://gnep.mcs.anl.gov:8010/waterfall?category=cgm >>>> any build that contains occ in its name is built with occ653 >>>> >>>> We actually test on cgm13.1 too, on buildbot >>>> http://gnep.mcs.anl.gov:8010/builders/cgm131-occ >>>> >>>> "trunk", "tr", "tru" means current cgm master repo (former trunk on >>>> svn) >>>> >>>> the others are with cgm branch cgm12.2 >>>> ________________________________________ >>>> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on >>>> behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov] >>>> Sent: Thursday, March 20, 2014 3:59 PM >>>> To: Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >>>> Subject: Re: [MOAB-dev] OCC CGM testing >>>> >>>> occ 653 with cgm master, and occ 653 with cgm branch cgm12.2 (serial >>>> and parallel) >>>> >>>> we used to test with cgm13.1 branch, too, but it should be fine >>>> >>>> Iulian >>>> ________________________________________ >>>> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on >>>> behalf of Patrick Shriwise [shriwise(a)wisc.edu] >>>> Sent: Thursday, March 20, 2014 1:52 PM >>>> To: MOAB-dev(a)mcs.anl.gov >>>> Subject: [MOAB-dev] OCC CGM testing >>>> >>>> Hi all, >>>> >>>> What version(s) of OCC and CGM are tested in the MOAB nightlies? >>>> >>>> Going to create a similar set of builds for testing on my local >>>> machine. >>>> >>>> Thanks! >>>> >>>> -- >>>> Patrick C. Shriwise >>>> Research Assistant >>>> University of Wisconsin - Madison >>>> Engineering Research Building - Rm. 428 >>>> 1500 Engineering Drive >>>> Madison, WI 53706 >>>> (608) 446-8173 >>>> >>>> >>> -- >>> -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- >>> Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal >>> Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu >>> Faculty Director, Advanced Computing Infrastructure >>> >>> >>> > -- > -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- > Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal > Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu > Faculty Director, Advanced Computing Infrastructure > > -- -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu Faculty Director, Advanced Computing Infrastructure

1 0

Re: [cgma-dev] make check doesn't work with current git repo (Cubit 14.1)
by Jane Hu 25 Mar '14

25 Mar '14

We only get cubit14.0 libraries and haven't been able to update cgm according to cubit14.1 yet. Jane On Tue, Mar 25, 2014 at 11:54 AM, <kanaev(a)ibrae.ac.ru> wrote: > log's attached > > my configure options are: > > export FATHOM_DIR=/home/anton/FATHOM_DIR > > export MPI2_PREFIX=/usr/lib/mpich2 > > export LD_LIBRARY_PATH=/home/anton/Cubit-14.1-Lin64/bin > > ./configure --prefix=${FATHOM_DIR}/cgm/build > --with-cubit=/home/anton/Cubit-14.1-Lin64 --with-mpi=${MPI2_PREFIX} > --disable-shared --enable-static > -- Jane Hu Asst. Researcher Dept. of Engineering Physics UW @ Madison "And we know that for those who love God, that is, for those who are called according to his purpose, all things are working together for good." (Romans 8:28)

1 0

commit/CGM: Jane Hu: Removed all previous versions of patches, just keep the most current patch version for occ6.5.3 for this release.
by Bitbucket 25 Mar '14

25 Mar '14

1 new commit in CGM: https://bitbucket.org/fathomteam/cgm/commits/458dd240da28/ Changeset: 458dd240da28 Branch: None User: Jane Hu Date: 2014-03-25 18:11:21 Summary: Removed all previous versions of patches, just keep the most current patch version for occ6.5.3 for this release. Affected #: 5 files Repository URL: https://bitbucket.org/fathomteam/cgm/ -- This is a commit notification from bitbucket.org. You are receiving this because you have the service enabled, addressing the recipient of this email.

1 0

commit/CGM: Jane Hu: Updated for occ_patches_6.5.2 and removed previous versions of patches for release 12.2.0.
by Bitbucket 25 Mar '14

25 Mar '14

1 new commit in CGM: https://bitbucket.org/fathomteam/cgm/commits/60e6d085ad03/ Changeset: 60e6d085ad03 Branch: None User: Jane Hu Date: 2014-03-25 18:05:46 Summary: Updated for occ_patches_6.5.2 and removed previous versions of patches for release 12.2.0. Affected #: 4 files Repository URL: https://bitbucket.org/fathomteam/cgm/ -- This is a commit notification from bitbucket.org. You are receiving this because you have the service enabled, addressing the recipient of this email.

1 0

make check doesn't work with current git repo (Cubit 14.1)
by kanaev＠ibrae.ac.ru 25 Mar '14

25 Mar '14

log's attached my configure options are: export FATHOM_DIR=/home/anton/FATHOM_DIR export MPI2_PREFIX=/usr/lib/mpich2 export LD_LIBRARY_PATH=/home/anton/Cubit-14.1-Lin64/bin ./configure --prefix=${FATHOM_DIR}/cgm/build --with-cubit=/home/anton/Cubit-14.1-Lin64 --with-mpi=${MPI2_PREFIX} --disable-shared --enable-static

1 0

Re: [cgma-dev] [MOAB-dev] OCC CGM testing
by Grindeanu, Iulian R. 25 Mar '14

25 Mar '14

did you build occ shared or static? We build here shared And then we set LD_LIBRARY_PATH=/homes/fathom/3rdparty/occ/OpenCASCADE6.6.0/gccGnep/lib also, the build uses cgm13.1 branch gnep/disks/itaps-buildslave/cgm131-occ660/build> git branch * cgm13.1 It looks like you have a missing file. Iulian ________________________________________ From: Paul Wilson [wilsonp(a)engr.wisc.edu] Sent: Tuesday, March 25, 2014 10:49 AM To: Grindeanu, Iulian R.; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov; CGMA Development Subject: Re: [MOAB-dev] OCC CGM testing Hi again, just looked at gnep and confirmed that make check is occurring. Here is my config: ../configure --with-occ=/home/wilsonp/.local/OCC/6.6.0_patched --prefix=/home/wilsonp/.local/cgm/13.1.1_occ660 Make check log: make_check_log Errors are attached as: make_check_err The errors are all in iTaps, so I included: test-suite.log I'll also try to sit with Jane to look at these. Paul On 03/25/2014 10:40 AM, Paul Wilson wrote: > Hi Iulian, > > [Adding CGM mailing list] > > Do you run 'make check' on buildbot? I did a clean build of OCC6.6.0 > and CGM13.1.1 and it built successfully but failed on 'make check'. > > Paul > > On 03/25/2014 07:11 AM, Grindeanu, Iulian R. wrote: >> hello, >> I built occ 6.6.0 on gnep.mcs, and cgm 13.1 configured with it >> worked fine last night >> http://gnep.mcs.anl.gov:8010/builders/cgm131-occ660 >> On mcs network, occ 660 is installed at: >> /homes/fathom/3rdparty/occ/OpenCASCADE6.6.0/gccGnep >> >> I will update instructions on >> http://trac.mcs.anl.gov/projects/ITAPS/wiki/BuildingOcc65 >> >> Jane, will all cgm branches work against occ 660? >> (I am pretty sure master branch will work, I don't know about cgm12.2) >> >> Iulian >> ________________________________________ >> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on >> behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov] >> Sent: Monday, March 24, 2014 10:48 AM >> To: Paul Wilson; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >> Subject: Re: [MOAB-dev] OCC CGM testing >> >> Hi Paul, >> occ 653 was built on gnep.mcs.anl.gov. It is not built every night, >> as part of buildbot. gnep is at ubuntu 10.04, but I did built it on >> my laptop successfully, too, which is 12.04 >> >> Maybe I don't understand the question. >> >> What kind of instructions? Maybe they are not up-to-date. Or the >> patch fails to be applied ? >> >> Iulian >> >> ________________________________________ >> From: Paul Wilson [wilsonp(a)engr.wisc.edu] >> Sent: Monday, March 24, 2014 10:05 AM >> To: Grindeanu, Iulian R.; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >> Subject: Re: [MOAB-dev] OCC CGM testing >> >> Hi Iulian, >> >> I was unsuccessful in following the instructions for building OCC653 >> with the provided patch. (Note: the instructions didn't work perfectly >> either, but that's a different issue). >> >> Can you provide the script or automated instructions that are used to >> build this on buildbot? >> >> Paul >> >> On 03/21/2014 10:09 AM, Grindeanu, Iulian R. wrote: >>> http://gnep.mcs.anl.gov:8010/waterfall?category=cgm >>> any build that contains occ in its name is built with occ653 >>> >>> We actually test on cgm13.1 too, on buildbot >>> http://gnep.mcs.anl.gov:8010/builders/cgm131-occ >>> >>> "trunk", "tr", "tru" means current cgm master repo (former trunk on >>> svn) >>> >>> the others are with cgm branch cgm12.2 >>> ________________________________________ >>> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on >>> behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov] >>> Sent: Thursday, March 20, 2014 3:59 PM >>> To: Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >>> Subject: Re: [MOAB-dev] OCC CGM testing >>> >>> occ 653 with cgm master, and occ 653 with cgm branch cgm12.2 (serial >>> and parallel) >>> >>> we used to test with cgm13.1 branch, too, but it should be fine >>> >>> Iulian >>> ________________________________________ >>> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on >>> behalf of Patrick Shriwise [shriwise(a)wisc.edu] >>> Sent: Thursday, March 20, 2014 1:52 PM >>> To: MOAB-dev(a)mcs.anl.gov >>> Subject: [MOAB-dev] OCC CGM testing >>> >>> Hi all, >>> >>> What version(s) of OCC and CGM are tested in the MOAB nightlies? >>> >>> Going to create a similar set of builds for testing on my local >>> machine. >>> >>> Thanks! >>> >>> -- >>> Patrick C. Shriwise >>> Research Assistant >>> University of Wisconsin - Madison >>> Engineering Research Building - Rm. 428 >>> 1500 Engineering Drive >>> Madison, WI 53706 >>> (608) 446-8173 >>> >>> >> -- >> -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- >> Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal >> Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu >> Faculty Director, Advanced Computing Infrastructure >> >> >> > -- -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu Faculty Director, Advanced Computing Infrastructure

1 0

Re: [cgma-dev] [MOAB-dev] OCC CGM testing
by Paul Wilson 25 Mar '14

25 Mar '14

Hi again, just looked at gnep and confirmed that make check is occurring. Here is my config: ../configure --with-occ=/home/wilsonp/.local/OCC/6.6.0_patched --prefix=/home/wilsonp/.local/cgm/13.1.1_occ660 Make check log: make_check_log Errors are attached as: make_check_err The errors are all in iTaps, so I included: test-suite.log I'll also try to sit with Jane to look at these. Paul On 03/25/2014 10:40 AM, Paul Wilson wrote: > Hi Iulian, > > [Adding CGM mailing list] > > Do you run 'make check' on buildbot? I did a clean build of OCC6.6.0 > and CGM13.1.1 and it built successfully but failed on 'make check'. > > Paul > > On 03/25/2014 07:11 AM, Grindeanu, Iulian R. wrote: >> hello, >> I built occ 6.6.0 on gnep.mcs, and cgm 13.1 configured with it >> worked fine last night >> http://gnep.mcs.anl.gov:8010/builders/cgm131-occ660 >> On mcs network, occ 660 is installed at: >> /homes/fathom/3rdparty/occ/OpenCASCADE6.6.0/gccGnep >> >> I will update instructions on >> http://trac.mcs.anl.gov/projects/ITAPS/wiki/BuildingOcc65 >> >> Jane, will all cgm branches work against occ 660? >> (I am pretty sure master branch will work, I don't know about cgm12.2) >> >> Iulian >> ________________________________________ >> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on >> behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov] >> Sent: Monday, March 24, 2014 10:48 AM >> To: Paul Wilson; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >> Subject: Re: [MOAB-dev] OCC CGM testing >> >> Hi Paul, >> occ 653 was built on gnep.mcs.anl.gov. It is not built every night, >> as part of buildbot. gnep is at ubuntu 10.04, but I did built it on >> my laptop successfully, too, which is 12.04 >> >> Maybe I don't understand the question. >> >> What kind of instructions? Maybe they are not up-to-date. Or the >> patch fails to be applied ? >> >> Iulian >> >> ________________________________________ >> From: Paul Wilson [wilsonp(a)engr.wisc.edu] >> Sent: Monday, March 24, 2014 10:05 AM >> To: Grindeanu, Iulian R.; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >> Subject: Re: [MOAB-dev] OCC CGM testing >> >> Hi Iulian, >> >> I was unsuccessful in following the instructions for building OCC653 >> with the provided patch. (Note: the instructions didn't work perfectly >> either, but that's a different issue). >> >> Can you provide the script or automated instructions that are used to >> build this on buildbot? >> >> Paul >> >> On 03/21/2014 10:09 AM, Grindeanu, Iulian R. wrote: >>> http://gnep.mcs.anl.gov:8010/waterfall?category=cgm >>> any build that contains occ in its name is built with occ653 >>> >>> We actually test on cgm13.1 too, on buildbot >>> http://gnep.mcs.anl.gov:8010/builders/cgm131-occ >>> >>> "trunk", "tr", "tru" means current cgm master repo (former trunk on >>> svn) >>> >>> the others are with cgm branch cgm12.2 >>> ________________________________________ >>> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on >>> behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov] >>> Sent: Thursday, March 20, 2014 3:59 PM >>> To: Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >>> Subject: Re: [MOAB-dev] OCC CGM testing >>> >>> occ 653 with cgm master, and occ 653 with cgm branch cgm12.2 (serial >>> and parallel) >>> >>> we used to test with cgm13.1 branch, too, but it should be fine >>> >>> Iulian >>> ________________________________________ >>> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on >>> behalf of Patrick Shriwise [shriwise(a)wisc.edu] >>> Sent: Thursday, March 20, 2014 1:52 PM >>> To: MOAB-dev(a)mcs.anl.gov >>> Subject: [MOAB-dev] OCC CGM testing >>> >>> Hi all, >>> >>> What version(s) of OCC and CGM are tested in the MOAB nightlies? >>> >>> Going to create a similar set of builds for testing on my local >>> machine. >>> >>> Thanks! >>> >>> -- >>> Patrick C. Shriwise >>> Research Assistant >>> University of Wisconsin - Madison >>> Engineering Research Building - Rm. 428 >>> 1500 Engineering Drive >>> Madison, WI 53706 >>> (608) 446-8173 >>> >>> >> -- >> -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- >> Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal >> Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu >> Faculty Director, Advanced Computing Infrastructure >> >> >> > -- -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu Faculty Director, Advanced Computing Infrastructure

1 0

Re: [cgma-dev] [MOAB-dev] OCC CGM testing
by Paul Wilson 25 Mar '14

25 Mar '14

Hi Iulian, [Adding CGM mailing list] Do you run 'make check' on buildbot? I did a clean build of OCC6.6.0 and CGM13.1.1 and it built successfully but failed on 'make check'. Paul On 03/25/2014 07:11 AM, Grindeanu, Iulian R. wrote: > hello, > I built occ 6.6.0 on gnep.mcs, and cgm 13.1 configured with it worked fine last night > http://gnep.mcs.anl.gov:8010/builders/cgm131-occ660 > On mcs network, occ 660 is installed at: > /homes/fathom/3rdparty/occ/OpenCASCADE6.6.0/gccGnep > > I will update instructions on > http://trac.mcs.anl.gov/projects/ITAPS/wiki/BuildingOcc65 > > Jane, will all cgm branches work against occ 660? > (I am pretty sure master branch will work, I don't know about cgm12.2) > > Iulian > ________________________________________ > From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov] > Sent: Monday, March 24, 2014 10:48 AM > To: Paul Wilson; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov > Subject: Re: [MOAB-dev] OCC CGM testing > > Hi Paul, > occ 653 was built on gnep.mcs.anl.gov. It is not built every night, as part of buildbot. gnep is at ubuntu 10.04, but I did built it on my laptop successfully, too, which is 12.04 > > Maybe I don't understand the question. > > What kind of instructions? Maybe they are not up-to-date. Or the patch fails to be applied ? > > Iulian > > ________________________________________ > From: Paul Wilson [wilsonp(a)engr.wisc.edu] > Sent: Monday, March 24, 2014 10:05 AM > To: Grindeanu, Iulian R.; Patrick Shriwise; MOAB-dev(a)mcs.anl.gov > Subject: Re: [MOAB-dev] OCC CGM testing > > Hi Iulian, > > I was unsuccessful in following the instructions for building OCC653 > with the provided patch. (Note: the instructions didn't work perfectly > either, but that's a different issue). > > Can you provide the script or automated instructions that are used to > build this on buildbot? > > Paul > > On 03/21/2014 10:09 AM, Grindeanu, Iulian R. wrote: >> http://gnep.mcs.anl.gov:8010/waterfall?category=cgm >> any build that contains occ in its name is built with occ653 >> >> We actually test on cgm13.1 too, on buildbot >> http://gnep.mcs.anl.gov:8010/builders/cgm131-occ >> >> "trunk", "tr", "tru" means current cgm master repo (former trunk on svn) >> >> the others are with cgm branch cgm12.2 >> ________________________________________ >> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov] >> Sent: Thursday, March 20, 2014 3:59 PM >> To: Patrick Shriwise; MOAB-dev(a)mcs.anl.gov >> Subject: Re: [MOAB-dev] OCC CGM testing >> >> occ 653 with cgm master, and occ 653 with cgm branch cgm12.2 (serial and parallel) >> >> we used to test with cgm13.1 branch, too, but it should be fine >> >> Iulian >> ________________________________________ >> From: moab-dev-bounces(a)mcs.anl.gov [moab-dev-bounces(a)mcs.anl.gov] on behalf of Patrick Shriwise [shriwise(a)wisc.edu] >> Sent: Thursday, March 20, 2014 1:52 PM >> To: MOAB-dev(a)mcs.anl.gov >> Subject: [MOAB-dev] OCC CGM testing >> >> Hi all, >> >> What version(s) of OCC and CGM are tested in the MOAB nightlies? >> >> Going to create a similar set of builds for testing on my local machine. >> >> Thanks! >> >> -- >> Patrick C. Shriwise >> Research Assistant >> University of Wisconsin - Madison >> Engineering Research Building - Rm. 428 >> 1500 Engineering Drive >> Madison, WI 53706 >> (608) 446-8173 >> >> > -- > -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- > Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal > Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu > Faculty Director, Advanced Computing Infrastructure > > > -- -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu Faculty Director, Advanced Computing Infrastructure

1 0

commit/CGM: Jane Hu: Updated occ6.6.0 patch for format issues.
by Bitbucket 24 Mar '14

24 Mar '14

1 new commit in CGM: https://bitbucket.org/fathomteam/cgm/commits/fbb519672862/ Changeset: fbb519672862 Branch: cgm13.1 User: Jane Hu Date: 2014-03-24 17:54:37 Summary: Updated occ6.6.0 patch for format issues. Affected #: 1 file Repository URL: https://bitbucket.org/fathomteam/cgm/ -- This is a commit notification from bitbucket.org. You are receiving this because you have the service enabled, addressing the recipient of this email.

1 0

OCC 6.6.0 patch fails
by Paul Wilson 24 Mar '14

24 Mar '14

Hi all, I'm trying to patch a clean extraction of OCC 6.6.0 with the patch in in CGM tag 13.1.1 and get the following errors: wilsonp@TodlawXPS ~/UW/research/software/OCC/6.6.0/ros > patch -p1 < ../../../cgm/geom/OCC/occ_patches_6.6.0 patching file src/BRepBuilderAPI/BRepBuilderAPI_Collect.cxx Hunk #1 FAILED at 217. 1 out of 1 hunk FAILED -- saving rejects to file src/BRepBuilderAPI/BRepBuilderAPI_Collect.cxx.rej patching file src/Extrema/Extrema_ExtPElS.cxx Hunk #5 FAILED at 339. Hunk #6 FAILED at 119. 2 out of 6 hunks FAILED -- saving rejects to file src/Extrema/Extrema_ExtPElS.cxx.rej Does the patch need to be updated? Should this work? It seems like quite a simple patch. Paul -- -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ -- Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu Faculty Director, Advanced Computing Infrastructure

1 0