1 new commit in CGM:
https://bitbucket.org/fathomteam/cgm/commits/77fcd710c8ca/
Changeset: 77fcd710c8ca
Branch: trunk
User: Jane Hu
Date: 2014-04-24 20:45:40
Summary: Fixed the non-debug mode testcase 'modify' failure issue. Basically, DLIList functions are not working as expected, so re-write the member accessing call.
Affected #: 1 file
Repository URL: https://bitbucket.org/fathomteam/cgm/
--
This is a commit notification from bitbucket.org. You are receiving
this because you have the service enabled, addressing the recipient of
this email.
I double checked my configuration, I used opencascade 6.7.0 for trunk cgm
build. I didn't realize that it wasn't comparable with 6.6.0. Working on it
now.
Jane
On Fri, Apr 11, 2014 at 3:24 PM, Paul Wilson <wilsonp(a)engr.wisc.edu> wrote:
> Hi Iulian,
>
> These are the same errors I see - 6 in total for me.
>
> Paul
>
>
> On 04/11/2014 11:30 AM, Grindeanu, Iulian R. wrote:
>
>> Hello,
>> Even after recompiling occ660 on ubuntu 12, I got the same errors
>> The tests to blame are in cgm/master branch:
>>
>> FAIL: merge_facet
>> ..
>> FAIL: merge_occ
>> ..
>> FAIL: r_w
>> ..
>> FAIL: groups_saved_to_OCC
>>
>> They fail in optimized mode, and pass in debug mode
>>
>> They used to work on ubuntu 10 on occ 653, on cgm master, in optimized
>> mode.
>>
>> They fail in optimized mode on ubuntu 12 on occ 653 and on occ 660.
>>
>> We did not test before for occ 660 on master , on ubuntu 10.
>>
>> Iulian
>>
>>
>>
>> ________________________________________
>> From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on
>> behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov]
>> Sent: Friday, April 11, 2014 10:02 AM
>> To: Paul Wilson; CGMA Development
>> Subject: Re: [cgma-dev] CGM failing with OCC6.6.0
>>
>> Hello,
>> There seems to be another problem with cgm master, uncovered by last
>> night builds
>>
>> On my machine, it works with occ 653, in debug mode, with mpi.
>> If I compile without debug mode, several tests fail;
>> it is the same error on gnep now;
>>
>> To add to the misery, on ubuntu 10.04, there were no errors in optimized
>> mode. (this is previous build, before gnep was upgraded)
>> http://gnep.mcs.anl.gov:8010/builders/cgmtr-occ-par-sta/
>> builds/430/steps/test/logs/stdio
>>
>> But errors pop up on my machine too, like these pointed by buildbot, last
>> night:
>> http://gnep.mcs.anl.gov:8010/builders/cgmtr-occ-par-sta/
>> builds/431/steps/test/logs/stdio
>>
>> Jane is on vacation, so I don't know who can figure these out now :(
>>
>> I will try to rebuild occ 653, on gnep. What kind of errors do you see
>> with 660 on cgm master?
>>
>> Iulian
>>
>> ________________________________________
>> From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on
>> behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov]
>> Sent: Thursday, April 10, 2014 1:49 PM
>> To: Paul Wilson; CGMA Development
>> Subject: Re: [cgma-dev] CGM failing with OCC6.6.0
>>
>> Ouch :(
>>
>> Buildbot was testing only cgm13.1 against occ660. If cgm master fails (I
>> think it is 14.0), it means Jane would have to look at it.
>>
>> Does anybody build cgm master with occ 660?
>>
>> Iulian
>>
>> ________________________________________
>> From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on
>> behalf of Paul Wilson [wilsonp(a)engr.wisc.edu]
>> Sent: Thursday, April 10, 2014 12:23 PM
>> To: CGMA Development
>> Subject: [cgma-dev] CGM failing with OCC6.6.0
>>
>> Hello all,
>>
>> I thought I had overcome these problems last month, but I seem to be
>> having new problems.
>>
>> I have successfully built CGM13.1 with OCC 6.6.0, including successful
>> testing with 'make check'.
>>
>> When I use the identical installation of OCC 6.6.0 to build the master
>> CGM branch (14.1?) it fails on 'make check'. I have looked and the
>> patch to OCC 6.6.0 didn't change between CGM13.1 and master. It
>> certainly seems that the code did change.
>>
>> Any tips?
>>
>> Paul
>>
>> --
>> -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ --
>> Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal
>> Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu
>> Faculty Director, Advanced Computing Infrastructure
>>
>>
>>
>>
> --
> -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ --
> Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal
> Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu
> Faculty Director, Advanced Computing Infrastructure
>
>
>
--
Jane Hu
Asst. Researcher
Dept. of Engineering Physics
UW @ Madison
"And we know that for those who love God, that is, for those who are called
according to his purpose, all things are working together for good."
(Romans 8:28)
Hi Iulian,
These are the same errors I see - 6 in total for me.
Paul
On 04/11/2014 11:30 AM, Grindeanu, Iulian R. wrote:
> Hello,
> Even after recompiling occ660 on ubuntu 12, I got the same errors
> The tests to blame are in cgm/master branch:
>
> FAIL: merge_facet
> ..
> FAIL: merge_occ
> ..
> FAIL: r_w
> ..
> FAIL: groups_saved_to_OCC
>
> They fail in optimized mode, and pass in debug mode
>
> They used to work on ubuntu 10 on occ 653, on cgm master, in optimized mode.
>
> They fail in optimized mode on ubuntu 12 on occ 653 and on occ 660.
>
> We did not test before for occ 660 on master , on ubuntu 10.
>
> Iulian
>
>
>
> ________________________________________
> From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov]
> Sent: Friday, April 11, 2014 10:02 AM
> To: Paul Wilson; CGMA Development
> Subject: Re: [cgma-dev] CGM failing with OCC6.6.0
>
> Hello,
> There seems to be another problem with cgm master, uncovered by last night builds
>
> On my machine, it works with occ 653, in debug mode, with mpi.
> If I compile without debug mode, several tests fail;
> it is the same error on gnep now;
>
> To add to the misery, on ubuntu 10.04, there were no errors in optimized mode. (this is previous build, before gnep was upgraded)
> http://gnep.mcs.anl.gov:8010/builders/cgmtr-occ-par-sta/builds/430/steps/te…
>
> But errors pop up on my machine too, like these pointed by buildbot, last night:
> http://gnep.mcs.anl.gov:8010/builders/cgmtr-occ-par-sta/builds/431/steps/te…
>
> Jane is on vacation, so I don't know who can figure these out now :(
>
> I will try to rebuild occ 653, on gnep. What kind of errors do you see with 660 on cgm master?
>
> Iulian
>
> ________________________________________
> From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov]
> Sent: Thursday, April 10, 2014 1:49 PM
> To: Paul Wilson; CGMA Development
> Subject: Re: [cgma-dev] CGM failing with OCC6.6.0
>
> Ouch :(
>
> Buildbot was testing only cgm13.1 against occ660. If cgm master fails (I think it is 14.0), it means Jane would have to look at it.
>
> Does anybody build cgm master with occ 660?
>
> Iulian
>
> ________________________________________
> From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on behalf of Paul Wilson [wilsonp(a)engr.wisc.edu]
> Sent: Thursday, April 10, 2014 12:23 PM
> To: CGMA Development
> Subject: [cgma-dev] CGM failing with OCC6.6.0
>
> Hello all,
>
> I thought I had overcome these problems last month, but I seem to be
> having new problems.
>
> I have successfully built CGM13.1 with OCC 6.6.0, including successful
> testing with 'make check'.
>
> When I use the identical installation of OCC 6.6.0 to build the master
> CGM branch (14.1?) it fails on 'make check'. I have looked and the
> patch to OCC 6.6.0 didn't change between CGM13.1 and master. It
> certainly seems that the code did change.
>
> Any tips?
>
> Paul
>
> --
> -- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ --
> Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal
> Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu
> Faculty Director, Advanced Computing Infrastructure
>
>
>
--
-- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ --
Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal
Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu
Faculty Director, Advanced Computing Infrastructure
Hello,
Even after recompiling occ660 on ubuntu 12, I got the same errors
The tests to blame are in cgm/master branch:
FAIL: merge_facet
..
FAIL: merge_occ
..
FAIL: r_w
..
FAIL: groups_saved_to_OCC
They fail in optimized mode, and pass in debug mode
They used to work on ubuntu 10 on occ 653, on cgm master, in optimized mode.
They fail in optimized mode on ubuntu 12 on occ 653 and on occ 660.
We did not test before for occ 660 on master , on ubuntu 10.
Iulian
________________________________________
From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov]
Sent: Friday, April 11, 2014 10:02 AM
To: Paul Wilson; CGMA Development
Subject: Re: [cgma-dev] CGM failing with OCC6.6.0
Hello,
There seems to be another problem with cgm master, uncovered by last night builds
On my machine, it works with occ 653, in debug mode, with mpi.
If I compile without debug mode, several tests fail;
it is the same error on gnep now;
To add to the misery, on ubuntu 10.04, there were no errors in optimized mode. (this is previous build, before gnep was upgraded)
http://gnep.mcs.anl.gov:8010/builders/cgmtr-occ-par-sta/builds/430/steps/te…
But errors pop up on my machine too, like these pointed by buildbot, last night:
http://gnep.mcs.anl.gov:8010/builders/cgmtr-occ-par-sta/builds/431/steps/te…
Jane is on vacation, so I don't know who can figure these out now :(
I will try to rebuild occ 653, on gnep. What kind of errors do you see with 660 on cgm master?
Iulian
________________________________________
From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov]
Sent: Thursday, April 10, 2014 1:49 PM
To: Paul Wilson; CGMA Development
Subject: Re: [cgma-dev] CGM failing with OCC6.6.0
Ouch :(
Buildbot was testing only cgm13.1 against occ660. If cgm master fails (I think it is 14.0), it means Jane would have to look at it.
Does anybody build cgm master with occ 660?
Iulian
________________________________________
From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on behalf of Paul Wilson [wilsonp(a)engr.wisc.edu]
Sent: Thursday, April 10, 2014 12:23 PM
To: CGMA Development
Subject: [cgma-dev] CGM failing with OCC6.6.0
Hello all,
I thought I had overcome these problems last month, but I seem to be
having new problems.
I have successfully built CGM13.1 with OCC 6.6.0, including successful
testing with 'make check'.
When I use the identical installation of OCC 6.6.0 to build the master
CGM branch (14.1?) it fails on 'make check'. I have looked and the
patch to OCC 6.6.0 didn't change between CGM13.1 and master. It
certainly seems that the code did change.
Any tips?
Paul
--
-- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ --
Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal
Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu
Faculty Director, Advanced Computing Infrastructure
Hello,
There seems to be another problem with cgm master, uncovered by last night builds
On my machine, it works with occ 653, in debug mode, with mpi.
If I compile without debug mode, several tests fail;
it is the same error on gnep now;
To add to the misery, on ubuntu 10.04, there were no errors in optimized mode. (this is previous build, before gnep was upgraded)
http://gnep.mcs.anl.gov:8010/builders/cgmtr-occ-par-sta/builds/430/steps/te…
But errors pop up on my machine too, like these pointed by buildbot, last night:
http://gnep.mcs.anl.gov:8010/builders/cgmtr-occ-par-sta/builds/431/steps/te…
Jane is on vacation, so I don't know who can figure these out now :(
I will try to rebuild occ 653, on gnep. What kind of errors do you see with 660 on cgm master?
Iulian
________________________________________
From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on behalf of Grindeanu, Iulian R. [iulian(a)mcs.anl.gov]
Sent: Thursday, April 10, 2014 1:49 PM
To: Paul Wilson; CGMA Development
Subject: Re: [cgma-dev] CGM failing with OCC6.6.0
Ouch :(
Buildbot was testing only cgm13.1 against occ660. If cgm master fails (I think it is 14.0), it means Jane would have to look at it.
Does anybody build cgm master with occ 660?
Iulian
________________________________________
From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on behalf of Paul Wilson [wilsonp(a)engr.wisc.edu]
Sent: Thursday, April 10, 2014 12:23 PM
To: CGMA Development
Subject: [cgma-dev] CGM failing with OCC6.6.0
Hello all,
I thought I had overcome these problems last month, but I seem to be
having new problems.
I have successfully built CGM13.1 with OCC 6.6.0, including successful
testing with 'make check'.
When I use the identical installation of OCC 6.6.0 to build the master
CGM branch (14.1?) it fails on 'make check'. I have looked and the
patch to OCC 6.6.0 didn't change between CGM13.1 and master. It
certainly seems that the code did change.
Any tips?
Paul
--
-- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ --
Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal
Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu
Faculty Director, Advanced Computing Infrastructure
Ouch :(
Buildbot was testing only cgm13.1 against occ660. If cgm master fails (I think it is 14.0), it means Jane would have to look at it.
Does anybody build cgm master with occ 660?
Iulian
________________________________________
From: cgma-dev-bounces(a)mcs.anl.gov [cgma-dev-bounces(a)mcs.anl.gov] on behalf of Paul Wilson [wilsonp(a)engr.wisc.edu]
Sent: Thursday, April 10, 2014 12:23 PM
To: CGMA Development
Subject: [cgma-dev] CGM failing with OCC6.6.0
Hello all,
I thought I had overcome these problems last month, but I seem to be
having new problems.
I have successfully built CGM13.1 with OCC 6.6.0, including successful
testing with 'make check'.
When I use the identical installation of OCC 6.6.0 to build the master
CGM branch (14.1?) it fails on 'make check'. I have looked and the
patch to OCC 6.6.0 didn't change between CGM13.1 and master. It
certainly seems that the code did change.
Any tips?
Paul
--
-- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ --
Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal
Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu
Faculty Director, Advanced Computing Infrastructure
Hello all,
I thought I had overcome these problems last month, but I seem to be
having new problems.
I have successfully built CGM13.1 with OCC 6.6.0, including successful
testing with 'make check'.
When I use the identical installation of OCC 6.6.0 to build the master
CGM branch (14.1?) it fails on 'make check'. I have looked and the
patch to OCC 6.6.0 didn't change between CGM13.1 and master. It
certainly seems that the code did change.
Any tips?
Paul
--
-- ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ --
Paul Wilson ~ UW-Madison ~ 608-263-0807 ~ cal: http://bit.ly/pphw-cal
Professor, Engineering Physics. ~ http://cnerg.engr.wisc.edu
Faculty Director, Advanced Computing Infrastructure
