March 2012 - cgma-dev - mailman3.cels.anl.gov

Release notes for CGM?
by James Porter 23 Mar '12

23 Mar '12

I've cut a release for CGM 12.2.0, but I didn't see any release notes in the source tree, so I'm not sure what's changed. If you know of things that have changed, could you email me with the list? Then I'll send out the announcement. - Jim

1 0

r5440 - cgm/trunk
by jvporter＠wisc.edu 23 Mar '12

23 Mar '12

Author: jvporter Date: 2012-03-23 00:45:57 -0500 (Fri, 23 Mar 2012) New Revision: 5440 Modified: cgm/trunk/configure.ac Log: Update CGM version to 12.3.0pre Modified: cgm/trunk/configure.ac =================================================================== --- cgm/trunk/configure.ac 2012-03-23 05:41:57 UTC (rev 5439) +++ cgm/trunk/configure.ac 2012-03-23 05:45:57 UTC (rev 5440) @@ -1,7 +1,7 @@ ############################################################################### # Standard Stuff ################################################################################ -AC_INIT(CGMA, 12.2.0) +AC_INIT(CGMA, 12.3.0pre) AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_AUX_DIR([.]) AC_CANONICAL_SYSTEM

1 0

r5439 - in cgm/tags: . 12.2.0
by jvporter＠wisc.edu 23 Mar '12

23 Mar '12

Author: jvporter Date: 2012-03-23 00:41:57 -0500 (Fri, 23 Mar 2012) New Revision: 5439 Added: cgm/tags/12.2.0/ Log: Add tag for CGM version 12.2.0 Property changes on: cgm/tags/12.2.0 ___________________________________________________________________ Added: svn:ignore + configure Makefile.in Makefile depcomp libtool config.guess config.sub config.log config.status config.lt ltmain.sh config.h.in config.h autom4te.cache missing install-sh aclocal.m4 stamp-* cgm.make Added: svn:mergeinfo + /cgm/branches/cubit:1041-3427 /cgm/branches/merge-cubit12:3424-4774

1 0

r5438 - in cgm/branches: . Version12.2
by jvporter＠wisc.edu 23 Mar '12

23 Mar '12

Author: jvporter Date: 2012-03-23 00:41:11 -0500 (Fri, 23 Mar 2012) New Revision: 5438 Added: cgm/branches/Version12.2/ Log: Add branch for version 12.2 Property changes on: cgm/branches/Version12.2 ___________________________________________________________________ Added: svn:ignore + configure Makefile.in Makefile depcomp libtool config.guess config.sub config.log config.status config.lt ltmain.sh config.h.in config.h autom4te.cache missing install-sh aclocal.m4 stamp-* cgm.make Added: svn:mergeinfo + /cgm/branches/cubit:1041-3427 /cgm/branches/merge-cubit12:3424-4774

1 0

r5437 - cgm/trunk
by jvporter＠wisc.edu 23 Mar '12

23 Mar '12

Author: jvporter Date: 2012-03-23 00:37:27 -0500 (Fri, 23 Mar 2012) New Revision: 5437 Modified: cgm/trunk/configure.ac Log: Update CGM version to 12.2.0 Modified: cgm/trunk/configure.ac =================================================================== --- cgm/trunk/configure.ac 2012-03-23 05:33:59 UTC (rev 5436) +++ cgm/trunk/configure.ac 2012-03-23 05:37:27 UTC (rev 5437) @@ -1,7 +1,7 @@ ############################################################################### # Standard Stuff ################################################################################ -AC_INIT(CGMA, 12.2.0b2pre) +AC_INIT(CGMA, 12.2.0) AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_AUX_DIR([.]) AC_CANONICAL_SYSTEM

1 0

r5432 - cgm/trunk/itaps
by jain＠mcs.anl.gov 20 Mar '12

20 Mar '12

Author: jain Date: 2012-03-20 22:19:24 -0500 (Tue, 20 Mar 2012) New Revision: 5432 Modified: cgm/trunk/itaps/iGeom_CGMA.cc Log: Fix error found while compiling on Mac OSX Modified: cgm/trunk/itaps/iGeom_CGMA.cc =================================================================== --- cgm/trunk/itaps/iGeom_CGMA.cc 2012-03-20 14:20:53 UTC (rev 5431) +++ cgm/trunk/itaps/iGeom_CGMA.cc 2012-03-21 03:19:24 UTC (rev 5432) @@ -6879,7 +6879,7 @@ iGeom_get_vtx_to_uv(RefVertex* vertex, RefFace* face, double& u, double& v) { DLIList<RefVertex*> pts; - TopologyEntity *topo_ent = dynamic_cast<const TopologyEntity*>(face); + TopologyEntity *topo_ent = dynamic_cast<TopologyEntity*>(face); topo_ent->ref_vertices(pts); pts.reset();

1 0

Re: [cgma-dev] OCC based CGM with openmpi
by Iulian Grindeanu 20 Mar '12

20 Mar '12

const should be removed. If it compiles for you without 'const', you should commit it. It passes make check for me (when I removed const) ----- Original Message ----- | It get the following message when compiling: | ^ | libtool: compile: /usr/local/bin/mpicxx -DHAVE_CONFIG_H -I. -I.. | -I../geom/parallel -I../geom -DLITTLE_ENDIAN=BYTE_ORDER | -DTEMPLATE_DEFS_INCLUDED -DHAVE_OCC -DHAVE_OCC_IGES -DHAVE_OCC_STEP | -DHAVE_OCC_STL -DSRCDIR=. -I../util -I../geom -I../init | -I../geom/parallel -DUSE_MPI -Wall -pipe -pedantic -g -MT CATag.lo -MD | -MP -MF .deps/CATag.Tpo -c CATag.cpp -o CATag.o >/dev/null 2>&1 | iGeom_CGMA.cc:6882:19: error: cannot initialize a variable of type | 'TopologyEntity *' with an rvalue of type | 'const TopologyEntity *' | TopologyEntity *topo_ent = dynamic_cast<const TopologyEntity*>(face); | ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | 1 warning and 1 error generated. | make[4]: *** [iGeom_CGMA.lo] Error 1 | make[4]: *** Waiting for unfinished jobs.... | mv -f .deps/CATag.Tpo .deps/CATag.Plo | make[3]: *** [all-recursive] Error 1 | make[2]: *** [all] Error 2 | make[1]: *** [all-recursive] Error 1 | make: *** [all] Error 2 | Rajeev | This is on Mac OSX Lion

1 0

OCC based CGM with openmpi
by Rajeev Jain 20 Mar '12

20 Mar '12

It get the following message when compiling: ^ libtool: compile: /usr/local/bin/mpicxx -DHAVE_CONFIG_H -I. -I.. -I../geom/parallel -I../geom -DLITTLE_ENDIAN=BYTE_ORDER -DTEMPLATE_DEFS_INCLUDED -DHAVE_OCC -DHAVE_OCC_IGES -DHAVE_OCC_STEP -DHAVE_OCC_STL -DSRCDIR=. -I../util -I../geom -I../init -I../geom/parallel -DUSE_MPI -Wall -pipe -pedantic -g -MT CATag.lo -MD -MP -MF .deps/CATag.Tpo -c CATag.cpp -o CATag.o >/dev/null 2>&1 iGeom_CGMA.cc:6882:19: error: cannot initialize a variable of type 'TopologyEntity *' with an rvalue of type 'const TopologyEntity *' TopologyEntity *topo_ent = dynamic_cast<const TopologyEntity*>(face); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 warning and 1 error generated. make[4]: *** [iGeom_CGMA.lo] Error 1 make[4]: *** Waiting for unfinished jobs.... mv -f .deps/CATag.Tpo .deps/CATag.Plo make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Rajeev This is on Mac OSX Lion

1 0

Re: [cgma-dev] OCC MacOS compile successful
by Rajeev Jain 05 Mar '12

05 Mar '12

CGM - based on OCC 6.5/MOAB/Lasso and MeshKit all compile on Mac OSX 10.7.3 with XCode-4.3. make check failure is a 64bit specific problem. Other code projects are facing the same problem: http://new-supercollider-mailing-lists-forums-use-these.2681727.n2.nabble.c… Below is the backtrace of test_edge_orient. bt #0 0x00007fff962c811e in _Unwind_Resume_or_Rethrow () #1 0x0000000101b96749 in Transfer_ProcessForTransient::Transferring () #2 0x0000000101b968b1 in Transfer_ProcessForTransient::Transfer () #3 0x0000000101c1a3ee in XSControl_TransferReader::TransferOne () #4 0x0000000101c12c96 in XSControl_Reader::TransferRoots () #5 0x00000001000e0657 in OCCQueryEngine::import_solid_model (this=0x109706cd0, file_name=0x1097073a8 "ilc_13body.stp", file_type=0x109707248 "STEP", imported_entities=@0x7fff5fbff2d8, print_results=true, logfile_name=0x0, heal_step=true, import_bodies=true, import_surfaces=true, import_curves=true, import_vertices=true, free_surfaces=true) at OCCQueryEngine.cpp:1513 #6 0x000000010051346e in GeometryQueryTool::import_solid_model (this=0x109704b90, file_name=0x1097073a8 "ilc_13body.stp", file_type=0x109707248 "STEP", logfile_name=0x0, heal_step=true, import_bodies=true, import_surfaces=true, import_curves=true, import_vertices=true, free_surfaces=true, imported_entities=0x0) at GeometryQueryTool.cpp:992 #7 0x000000010041cf01 in CubitCompat_import_solid_model (file_name=0x1097073a8 "ilc_13body.stp", file_type=0x109707248 "STEP", logfile_name=0x0, heal_step=true, import_bodies=true, import_surfaces=true, import_curves=true, import_vertices=true, free_surfaces=true, imported_entities=0x0) at CubitCompat.cpp:85 #8 0x00000001000338d0 in igeom_load_ (instance=0x10083d760, name=0x1097073a8 "ilc_13body.stp", options=0x0, err=0x7fff5fbff95c, name_len=14, options_size=0) at iGeom_CGMA.cc:439 #9 0x0000000100002188 in main (argc=1, argv=0x7fff5fbff9d8) at test_edge_orient.cc:59 (gdb) The error message is: ........ ..... *** Error on Record 2643 (on 9879 -> 26 % in File) *** Ident #1439 Complex Type incorrect : GEOMETRIC_REPRESENTATION_ITEM / CURVE ... *** Error on Record 2657 (on 9879 -> 26 % in File) *** Ident #1444 Complex Type incorrect : RATIONAL_B_SPLINE_CURVE / BOUNDED_CURVE ... *** Error on Record 2659 (on 9879 -> 26 % in File) *** Ident #1444 Complex Type incorrect : REPRESENTATION_ITEM / GEOMETRIC_REPRESENTATION_ITEM ... *** Error on Record 2660 (on 9879 -> 26 % in File) *** Ident #1444 Complex Type incorrect : GEOMETRIC_REPRESENTATION_ITEM / CURVE ... ... Step File loaded ... Elapsed time: 0 Hours 0 Minutes 0.147091 Seconds CPU user time: 0.01 seconds CPU system time: 0 seconds 9879 records (entities,sub-lists,scopes), 29736 parameters ... Parameters prepared ... Elapsed time: 0 Hours 0 Minutes 0.151193 Seconds CPU user time: 0.01 seconds CPU system time: 0 seconds Report : 75 unknown entities ... Objets analysed ... Elapsed time: 0 Hours 0 Minutes 0.158354 Seconds CPU user time: 0.02 seconds CPU system time: 0 seconds STEP Loading done : 5784 Entities Program received signal EXC_BAD_ACCESS, Could not access memory. Reason: KERN_INVALID_ADDRESS at address: 0x0000000000000015 0x00007fff962c811e in _Unwind_Resume_or_Rethrow () (gdb) No source file named address. Rajeev >________________________________ > From: Jane Hu <janejhu(a)gmail.com> >To: Rajeev Jain <jain(a)mcs.anl.gov> >Cc: Tim Tautges <tautges(a)mcs.anl.gov>; CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >Sent: Tuesday, February 28, 2012 12:26 PM >Subject: Re: [cgma-dev] OCC MacOS compile successful > > >Can you give me some detailed debug info.? it runs ok on Linux. > >Thanks. > >Jane > > >On Tue, Feb 28, 2012 at 11:41 AM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: > >Thanks, Jane. I made a couple of changes in addition to checking out the latest version and recompilng: >>1. Installed gcc -4.7 (The previous error might be a compiler issue as per http://www.opencascade.org/org/forum/thread_19739/) >>2. Applied the OCC652 patch in cgm/geom/occ >> >> >>make works ! >>make check gives me this error >>make check-TESTS >>Geometry engine set to: OpenCascade 6.5 >> ... Step File Reading : ilc_13body.stp >> ... STEP File Read ... >>Elapsed time: 0 Hours 0 Minutes 0.007108 Seconds >>CPU user time: 0.01 seconds >>CPU system time: 0 seconds >> *** Error on Record 648 (on 9879 -> 6 % in File) *** Ident #479 >>Complex Type incorrect : SOLID_ANGLE_UNIT / SI_UNIT ... >> *** Error on Record 862 (on 9879 -> 8 % in File) *** Ident #650 >>Complex Type incorrect : NAMED_UNIT / LENGTH_UNIT ... >> *** Error on Record 1489 (on 9879 -> 15 % in File) *** Ident #1115 >>Complex Type incorrect : RATIONAL_B_SPLINE_CURVE / BOUNDED_CURVE ... >> *** Error >>.................. >> *** Error on Record 2660 (on 9879 -> 26 % in File) *** Ident #1444 >>Complex Type incorrect : GEOMETRIC_REPRESENTATION_ITEM / CURVE ... >> ... Step File loaded ... >>Elapsed time: 0 Hours 0 Minutes 0.01294 Seconds >>CPU user time: 0.01 seconds >>CPU system time: 0 seconds >> 9879 records (entities,sub-lists,scopes), 29736 parameters >> >> >> ... Parameters prepared ... Elapsed time: 0 Hours 0 Minutes 0.016723 Seconds >>CPU user time: 0.02 seconds >>CPU system time: 0 seconds >>Report : 75 unknown entities >> ... Objets analysed ... >>Elapsed time: 0 Hours 0 Minutes 0.023135 Seconds >>CPU user time: 0.02 seconds >>CPU system time: 0 seconds >> STEP Loading done : 5784 Entities >>/bin/sh: line 1: 29000 Segmentation fault: 11 ${dir}$tst >>FAIL: test_edge_orient >>Using default input file: ./../test/LeverArm.brep >>Geometry engine set to: OpenCascade 6.5 >> >> >> >> >>ITAPS GEOMETRY INTERFACE TEST PROGRAM: >> >> >>/bin/sh: line 1: 29019 Segmentation fault: 11 ${dir}$tst >>FAIL: testgeom_occ >> >> >> >> >> >> >>Creating Prism >> >> >>terminate called throwing an exception >> >> >>/bin/sh: line 1: 29037 Abort trap: 6 ${dir}$tst >>FAIL: copy_attrib >>=================== >>3 of 3 tests failed >>=================== >>make[4]: *** [check-TESTS] Error 1 >>make[3]: *** [check-am] Error 2 >>make[2]: *** [check-recursive] Error 1 >>make[1]: *** [check] Error 2 >>make: *** [check-recursive] Error 1 >> >> >> >>Rajeev >> >> >> >>>________________________________ >>> From: Jane Hu <janejhu(a)gmail.com> >>>To: Rajeev Jain <jain(a)mcs.anl.gov> >>>Cc: Tim Tautges <tautges(a)mcs.anl.gov>; CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >>>Sent: Tuesday, February 28, 2012 10:28 AM >>> >>>Subject: Re: [cgma-dev] OCC MacOS compile successful >>> >>> >>> >>> >>>Hi, Rajeev, >>> >>>I just checked in r5411, please update your cgm to see if it fixes the problem. >>> >>>Jane >>> >>> >>>On Mon, Feb 27, 2012 at 2:22 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: >>> >>>Right, I was missing DYLD_LBRARY_PATH. CGM configures now, make runs for a while then I get the following error: >>>>.... >>>>In copy constructor 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const BRepBuilderAPI_MakeShape&)': >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeShape.hxx:38: error: within this context >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const BRepBuilderAPI_MakeWire&)': >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: note: synthesized method 'BRepBuilderAPI_MakeShape::BRepBuilderAPI_MakeShape(const BRepBuilderAPI_MakeShape&)' first required here >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx: In copy constructor 'BRepLib_MakeShape::BRepLib_MakeShape(const BRepLib_MakeShape&)': >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: error: within this context >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: error: within this context >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_ListOfShape.hxx:112: error: 'TopTools_ListOfShape::TopTools_ListOfShape(const TopTools_ListOfShape&)' is private >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeShape.hxx:46: error: within this context >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx: In copy constructor 'BRepLib_MakeWire::BRepLib_MakeWire(const BRepLib_MakeWire&)': >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: note: synthesized method 'BRepLib_MakeShape::BRepLib_MakeShape(const BRepLib_MakeShape&)' first required here >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/TopTools_MapOfShape.hxx:88: error: 'TopTools_MapOfShape::TopTools_MapOfShape(const TopTools_MapOfShape&)' is private >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepLib_MakeWire.hxx:81: error: within this context >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx: In copy constructor 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const BRepBuilderAPI_MakeWire&)': >>>>/Users/rajeevjain/Downloads/OpenCASCADE652/ros/install/inc/BRepBuilderAPI_MakeWire.hxx:66: note: synthesized method 'BRepLib_MakeWire::BRepLib_MakeWire(const BRepLib_MakeWire&)' first required here >>>>OCCModifyEngine.cpp: In member function 'CubitStatus OCCModifyEngine::do_loft(BRepOffsetAPI_ThruSections&, DLIList<DLIList<TopoDS_Edge*>*>) const': >>>>OCCModifyEngine.cpp:952: note: synthesized method 'BRepBuilderAPI_MakeWire::BRepBuilderAPI_MakeWire(const BRepBuilderAPI_MakeWire&)' first required here >>>>make[4]: *** [OCCModifyEngine.lo] Error 1 >>>>make[3]: *** [all-recursive] Error 1 >>>>make[2]: *** [all] Error 2 >>>>make[1]: *** [all-recursive] Error 1 >>>>make: *** [all] Error 2 >>>> >>>> >>>> >>>>Rajeev >>>> >>>> >>>> >>>>>________________________________ >>>>> From: Jane Hu <janejhu(a)gmail.com> >>>>>To: Rajeev Jain <jain(a)mcs.anl.gov> >>>>>Cc: Tim Tautges <tautges(a)mcs.anl.gov>; CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >>>>>Sent: Monday, February 27, 2012 9:42 AM >>>>>Subject: Re: [cgma-dev] OCC MacOS compile successful >>>>> >>>>> >>>>> >>>>>Hi, Rajeev: >>>>> >>>>>It's good news that you are able to build OCC in Mac! >>>>> >>>>>I saw this error before too in building CGM on OCC on Linux. However, it turned out to be a set up problem. Can you look at config.log, and check if it said that you are using the correctly OCC library? You have to set the LD_LIBRARY_PATH to include your new build directory. >>>>> >>>>>Hope it helps. >>>>> >>>>>Jane >>>>> >>>>> >>>>>On Fri, Feb 24, 2012 at 12:21 PM, Rajeev Jain <jain(a)mcs.anl.gov> wrote: >>>>> >>>>>Thanks, James. >>>>>>I was able to build OCC. Did you get CGM to work? >>>>>>Configuring CGM I get this: >>>>>>checking if OpenCascade requires -lpthread... configure: error: Cannot link libTKKernel with Standard_Mutex >>>>>> >>>>>> >>>>>>Rajeev >>>>>> >>>>>> >>>>>> >>>>>>>________________________________ >>>>>>> From: Tim Tautges <tautges(a)mcs.anl.gov> >>>>>>>To: CGMA Development <cgma-dev(a)mcs.anl.gov>; James Tautges <jamesdtautges(a)gmail.com> >>>>>>>Sent: Friday, January 6, 2012 9:10 AM >>>>>>>Subject: [cgma-dev] OCC MacOS compile successful >>>>>>> >>>>>>> >>>>>>>Hi all, >>>>>>> Good news, last night my son James, hacker extraordinaire, got OCC 6.5.2 to compile successfully on MacOS. The details: >>>>>>> >>>>>>>- Snow leopard, gcc4.2, OCC6.5.2 (straight from the OCC download page) >>>>>>>- Besides the following changes, follow the steps on http://opencascade.blogspot.com/2010/04/porting-on-macos.html >>>>>>>- Run "autoreconf -fi" in the ros folder and then "aclocal", "automake", and "autoconf" >>>>>>> >>>>>>>- Add the following code to the platform specific part of ros/src/OSD/OSD_Chronometer.cxx: >>>>>>>#ifdef __MACH__ >>>>>>># include <time.h> >>>>>>># include <sys/time.h> >>>>>>># include <mach/clock.h> >>>>>>># include <mach/mach.h> >>>>>>>#endif >>>>>>> >>>>>>>- And then add this code to the OSD_Chronometer::GetThreadCPU function: >>>>>>>#elif defined(__MACH__) >>>>>>> struct timespec ts; >>>>>>> clock_serv_t cclock; >>>>>>> mach_timespec_t mts; >>>>>>> host_get_clock_service(mach_host_self(), CALENDAR_CLOCK, &cclock); >>>>>>> clock_get_time(cclock, &mts); >>>>>>> mach_port_deallocate(mach_task_self(), cclock); >>>>>>> ts.tv_sec = mts.tv_sec; >>>>>>> ts.tv_nsec = mts.tv_nsec; >>>>>>> >>>>>>>- Proceed to configure, make, and install >>>>>>> >>>>>>>The new version of OSD_Chronometer.cxx is attached. >>>>>>> >>>>>>>We haven't built or tested CGM on top of this, but that's next. >>>>>>> >>>>>>>- tim >>>>>>> >>>>>>>-- >>>>>>>================================================================ >>>>>>>"You will keep in perfect peace him whose mind is >>>>>>> steadfast, because he trusts in you." Isaiah 26:3 >>>>>>> >>>>>>> Tim Tautges Argonne National Laboratory >>>>>>> (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) >>>>>>>phone (gvoice): (608) 354-1459 1500 Engineering Dr. >>>>>>> fax: (608) 263-4499 Madison, WI 53706 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>> >>>>> >>>>> >>> >>> >>> > > >

1 0