November 2012 - cgma-dev - mailman3.cels.anl.gov

Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010?
by Iulian Grindeanu 05 Nov '12

05 Nov '12

Hello, How did you configure? Even if you use cmake, at some point you need to have a configuration step. You can see what we build every night here: http://gnep.mcs.anl.gov:8010/waterfall?category=cgm Those are all built on a Linux compute node, ubuntu 10.04, 64-bit. The configuration closest to yours' is probably cgm-occ or cgm-occ-sta. These are built on merge cubit 12.2 branch, with occ version 6.5.3 http://gnep.mcs.anl.gov:8010/builders/cgm-occ or http://gnep.mcs.anl.gov:8010/builders/cgm-occ-sta If you send your config.log file (or equivalent?) , we may have some clues of what is not working. Best Regards, Iulian ----- Original Message ----- | Dear all, | I have successfully built the project 'cubit_OOC' after I used the | version 12.2 from here: | https://svn.mcs.anl.gov/repos/ITAPS/cgm/branches/Version12.2/ | However, after I built a simple example "\test\operation.cpp" and run | it, the following error displayed: | ERROR: Invalid or unsupported engine: 'OCC' | Is there anything I missed? | Thanks, | Zhanghong Tang | --- On Sun, 11/4/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> wrote: | | From: Iulian Grindeanu <iulian(a)mcs.anl.gov> | | Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + | | VS2010? | | To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> | | Date: Sunday, November 4, 2012, 12:51 AM | | Hello, | | It would be good if you can make it work. | | How did you configure ? Using ccmake or autotools in cygwin? | | You should configure with-occ OR with-cubit, if you have cubit. | | It seems that you installed occ, so configure ONLY with-occ. | | I will be out of email until Monday | | Iulian | | | Dear Dr. Grindeanu, | | | Thank you very much for pointing out my problem. I thought that | | | the | | | CGMA can work without any other package. | | | Now I have installed Open CASCADE Technology 6.5.3 and rebuild the | | | CGMA project (reset the path by CMake and create the VS2010 | | | projects), | | | the following error displayed when build the cubit_OCC project: | | | 1>------ Build started: Project: ZERO_CHECK, Configuration: Debug | | | x64 | | | ------ | | | 1>Build started 2012/11/3 23:41:53. | | | 1>InitializeBuildStatus: | | | 1> Creating "x64\Debug\ZERO_CHECK\ZERO_CHECK.unsuccessfulbuild" | | | because "AlwaysCreate" was specified. | | | 1>FinalizeBuildStatus: | | | 1> Deleting file | | | "x64\Debug\ZERO_CHECK\ZERO_CHECK.unsuccessfulbuild". | | | 1> Touching "x64\Debug\ZERO_CHECK\ZERO_CHECK.lastbuildstate". | | | 1> | | | 1>Build succeeded. | | | 1> | | | 1>Time Elapsed 00:00:00.06 | | | 2>------ Build started: Project: cubit_OCC, Configuration: Debug | | | x64 | | | ------ | | | 2>Build started 2012/11/3 23:41:53. | | | 2>InitializeBuildStatus: | | | 2> Touching "cubit_OCC.dir\Debug\cubit_OCC.unsuccessfulbuild". | | | 2>CustomBuild: | | | 2> All outputs are up-to-date. | | | 2>ClCompile: | | | 2> OCCModifyEngine.cpp | | | 2>E:\cgma-12.2.0b1\util\CubitMessage.hpp(400): warning C4138: '*/' | | | found outside of comment | | | 2>E:\cgma-12.2.0b1\geom\GeometryQueryEngine.hpp(259): warning | | | C4138: | | | '*/' found outside of comment | | | 2>E:\cgma-12.2.0b1\geom\GeometryQueryEngine.hpp(260): warning | | | C4138: | | | '*/' found outside of comment | | | 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(715): error C2440: | | | '<function-style-cast>' : cannot convert from | | | 'Handle_Geom_RectangularTrimmedSurface' to | | | 'BRepBuilderAPI_MakeFace' | | | 2> No constructor could take the source type, or constructor | | | overload | | | resolution was ambiguous | | | 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(725): error C2440: | | | '<function-style-cast>' : cannot convert from | | | 'Handle_Geom_RectangularTrimmedSurface' to | | | 'BRepBuilderAPI_MakeFace' | | | 2> No constructor could take the source type, or constructor | | | overload | | | resolution was ambiguous | | | 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(744): error C2665: | | | 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace' : none of the | | | 23 | | | overloads could convert all the argument types | | | 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(104): | | | could | | | be 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Pln | | | &,const Standard_Real,const Standard_Real,const | | | Standard_Real,const | | | Standard_Real)' | | | 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(106): | | | or | | | 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const | | | gp_Cylinder | | | &,const Standard_Real,const Standard_Real,const | | | Standard_Real,const | | | Standard_Real)' | | | 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(108): | | | or | | | 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Cone | | | &,const Standard_Real,const Standard_Real,const | | | Standard_Real,const | | | Standard_Real)' | | | 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(110): | | | or | | | 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Sphere | | | &,const Standard_Real,const Standard_Real,const | | | Standard_Real,const | | | Standard_Real)' | | | 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(112): | | | or | | | 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Torus | | | &,const Standard_Real,const Standard_Real,const | | | Standard_Real,const | | | Standard_Real)' | | | 2> while trying to match the argument list | | | '(Handle_Geom_BezierSurface, double, double, double, double)' | | | 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(2267): warning C4800: | | | 'Standard_Boolean' : forcing value to bool 'true' or 'false' | | | (performance warning) | | | 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(7913): error C2440: | | | '<function-style-cast>' : cannot convert from | | | 'Handle_Geom_RectangularTrimmedSurface' to | | | 'BRepBuilderAPI_MakeFace' | | | 2> No constructor could take the source type, or constructor | | | overload | | | resolution was ambiguous | | | 2> | | | 2>Build FAILED. | | | 2> | | | 2>Time Elapsed 00:00:01.52 | | | 3>------ Build started: Project: ALL_BUILD, Configuration: Debug | | | x64 | | | ------ | | | 3>Build started 2012/11/3 23:41:54. | | | 3>InitializeBuildStatus: | | | 3> Creating "x64\Debug\ALL_BUILD\ALL_BUILD.unsuccessfulbuild" | | | because | | | "AlwaysCreate" was specified. | | | 3>CustomBuild: | | | 3> Build all projects | | | 3>FinalizeBuildStatus: | | | 3> Deleting file | | | "x64\Debug\ALL_BUILD\ALL_BUILD.unsuccessfulbuild". | | | 3> Touching "x64\Debug\ALL_BUILD\ALL_BUILD.lastbuildstate". | | | 3> | | | 3>Build succeeded. | | | 3> | | | 3>Time Elapsed 00:00:02.02 | | | 4>------ Skipped Build: Project: INSTALL, Configuration: Debug x64 | | | ------ | | | 4>Project not selected to build for this solution configuration | | | ========== Build: 2 succeeded, 1 failed, 7 up-to-date, 1 skipped | | | ========== | | | Could you please take a look at it for me? | | | Thanks, | | | Zhanghong Tang | | | --- On Sat, 11/3/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> wrote: | | | | From: Iulian Grindeanu <iulian(a)mcs.anl.gov> | | | | Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 64bit | | | | + | | | | VS2010? | | | | To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> | | | | Cc: "CGMA Development" <cgma-dev(a)mcs.anl.gov> | | | | Date: Saturday, November 3, 2012, 10:30 PM | | | | | Dear Dr. Grindeanu, | | | | | Thank you very much for your kindly reply. With the help of | | | | | CMake | | | | | I | | | | | have successfully build the libraries. There are 7 libs | | | | | generated: | | | | | cgma_init.lib | | | | | cholla.lib | | | | | cubit_facet.lib | | | | | cubit_facetboolstub.lib | | | | | cubit_geom.lib | | | | | cubit_util.lib | | | | | cubit_virtual.lib | | | | Hello, | | | | So I assume you are on the main branch. | | | | You can't use CGM without a geometry engine. Did you read my | | | | previous | | | | e-mail? | | | | You will need to configure with OCC or Cubit. | | | | Sorry, I can't be of more help. | | | | Iulian | | | | | I tried to build a simple test "brick.cpp", however, there are | | | | | some | | | | | errors when run the example: | | | | | Facet-based geometry modification is a beta capability. | | | | | ERROR: This capability is currently disabled. | | | | | To enable this capability, issue the command 'set developer | | | | | commands | | | | | on'. | | | | | ERROR: In GeometryModifyTool::brick | | | | | Problem creating a brick. | | | | | Assertion failed: brick != 0, file ..\test\brick.cpp, line 42 | | | | | I would like to do a simple test: | | | | | 1) build a box and a sphere with both center at (0,0,0) and | | | | | size | | | | | 1; | | | | | 2) do boolean operations such as intersection between the box | | | | | and | | | | | sphere; | | | | | 3) output the result to an OFF file. | | | | | Could anyone give me such a simple example? | | | | | Thanks, | | | | | Zhanghong Tang | | | | | --- On Fri, 11/2/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> | | | | | wrote: | | | | | | From: Iulian Grindeanu <iulian(a)mcs.anl.gov> | | | | | | Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 | | | | | | 64bit | | | | | | + | | | | | | VS2010? | | | | | | To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> | | | | | | Cc: cgma-dev(a)mcs.anl.gov | | | | | | Date: Friday, November 2, 2012, 11:21 PM | | | | | | Hello, | | | | | | I don't know if anybody tried building on Windows, maybe | | | | | | Jane | | | | | | or | | | | | | Tim | | | | | | know. | | | | | | You have to configure with a geometric engine. If you don't | | | | | | have | | | | | | Cubit | | | | | | for your platform, you will need to configure with OCC | | | | | | It seems that you use cygwin. I know that OCC can be build | | | | | | on | | | | | | Windows, | | | | | | on VS 2010. | | | | | | (http://www.opencascade.org/getocc/require/) | | | | | | You then can try configuring on cygwin with occ. And then | | | | | | look | | | | | | at | | | | | | Makefiles generated to see what would be needed for projects | | | | | | in | | | | | | VS. | | | | | | Or | | | | | | is there a cmake-based build? I think that would be easier | | | | | | to | | | | | | port | | | | | | to | | | | | | Windows. | | | | | | Iulian | | | | | | | Dear all, | | | | | | | I am trying to build the CGMA on Windows 7 64bit + VS2010. | | | | | | | I | | | | | | | have | | | | | | | attached the project. However, there are hundreds of | | | | | | | errors | | | | | | | such | | | | | | | as: | | | | | | | 2>CGMAD.lib(DAG.obj) : error LNK2019: unresolved external | | | | | | | symbol | | | | | | | "public: __cdecl DLIList<class ModelEntity | | | | | | | *>::~DLIList<class | | | | | | | ModelEntity *>(void)" | | | | | | | (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | | | | | referenced in function "public: enum CubitStatus __cdecl | | | | | | | DAG::get_children_at_level(class DLIList<class ModelEntity | | | | | | | *> | | | | | | | &,int,class DLIList<class ModelEntity *> &)" | | | | | | | (?get_children_at_level@DAG@@QEAA?AW4CubitStatus@@AEAV?$DLIList@PEAVModelEntity@@@@H0@Z) | | | | | | | 2>CGMAD.lib(CAActuateSet.obj) : error LNK2001: unresolved | | | | | | | external | | | | | | | symbol "public: __cdecl DLIList<class ModelEntity | | | | | | | *>::~DLIList<class | | | | | | | ModelEntity *>(void)" | | | | | | | (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | | | | | 2>CGMAD.lib(PartitionTool.obj) : error LNK2001: unresolved | | | | | | | external | | | | | | | symbol "public: __cdecl DLIList<class ModelEntity | | | | | | | *>::~DLIList<class | | | | | | | ModelEntity *>(void)" | | | | | | | (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | | | | | 2>CGMAD.lib(CompositeTool.obj) : error LNK2001: unresolved | | | | | | | external | | | | | | | symbol "public: __cdecl DLIList<class ModelEntity | | | | | | | *>::~DLIList<class | | | | | | | ModelEntity *>(void)" | | | | | | | (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | | | | | 2>CGMAD.lib(TopologyEntity.obj) : error LNK2001: | | | | | | | unresolved | | | | | | | external | | | | | | | symbol "public: __cdecl DLIList<class ModelEntity | | | | | | | *>::~DLIList<class | | | | | | | ModelEntity *>(void)" | | | | | | | (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | | | | | Could anyone help me to take a look at it and give me some | | | | | | | hints | | | | | | | on | | | | | | | how to setup the project or modify some code to | | | | | | | successfully | | | | | | | build | | | | | | | the | | | | | | | project? | | | | | | | Thanks, | | | | | | | Zhanghong Tang

1 0

Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010?
by Zhanghong Tang 03 Nov '12

03 Nov '12

Dear all, I have successfully built the project 'cubit_OOC' after I used the version 12.2 from here: https://svn.mcs.anl.gov/repos/ITAPS/cgm/branches/Version12.2/ However, after I built a simple example "\test\operation.cpp" and run it, the following error displayed: ERROR: Invalid or unsupported engine: 'OCC' Is there anything I missed? Thanks, Zhanghong Tang --- On Sun, 11/4/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> wrote: From: Iulian Grindeanu <iulian(a)mcs.anl.gov> Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010? To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> Date: Sunday, November 4, 2012, 12:51 AM #yiv1112316354 p {margin:0;}Hello, It would be good if you can make it work. How did you configure ? Using ccmake or autotools in cygwin? You should configure with-occ OR with-cubit, if you have cubit. It seems that you installed occ, so configure ONLY with-occ. I will be out of email until Monday Iulian Dear Dr. Grindeanu, Thank you very much for pointing out my problem. I thought that the CGMA can work without any other package. Now I have installed Open CASCADE Technology 6.5.3 and rebuild the CGMA project (reset the path by CMake and create the VS2010 projects), the following error displayed when build the cubit_OCC project: 1>------ Build started: Project: ZERO_CHECK, Configuration: Debug x64 ------ 1>Build started 2012/11/3 23:41:53. 1>InitializeBuildStatus: 1> Creating "x64\Debug\ZERO_CHECK\ZERO_CHECK.unsuccessfulbuild" because "AlwaysCreate" was specified. 1>FinalizeBuildStatus: 1> Deleting file "x64\Debug\ZERO_CHECK\ZERO_CHECK.unsuccessfulbuild". 1> Touching "x64\Debug\ZERO_CHECK\ZERO_CHECK.lastbuildstate". 1> 1>Build succeeded. 1> 1>Time Elapsed 00:00:00.06 2>------ Build started: Project: cubit_OCC, Configuration: Debug x64 ------ 2>Build started 2012/11/3 23:41:53. 2>InitializeBuildStatus: 2> Touching "cubit_OCC.dir\Debug\cubit_OCC.unsuccessfulbuild". 2>CustomBuild: 2> All outputs are up-to-date. 2>ClCompile: 2> OCCModifyEngine.cpp 2>E:\cgma-12.2.0b1\util\CubitMessage.hpp(400): warning C4138: '*/' found outside of comment 2>E:\cgma-12.2.0b1\geom\GeometryQueryEngine.hpp(259): warning C4138: '*/' found outside of comment 2>E:\cgma-12.2.0b1\geom\GeometryQueryEngine.hpp(260): warning C4138: '*/' found outside of comment 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(715): error C2440: '<function-style-cast>' : cannot convert from 'Handle_Geom_RectangularTrimmedSurface' to 'BRepBuilderAPI_MakeFace' 2> No constructor could take the source type, or constructor overload resolution was ambiguous 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(725): error C2440: '<function-style-cast>' : cannot convert from 'Handle_Geom_RectangularTrimmedSurface' to 'BRepBuilderAPI_MakeFace' 2> No constructor could take the source type, or constructor overload resolution was ambiguous 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(744): error C2665: 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace' : none of the 23 overloads could convert all the argument types 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(104): could be 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Pln &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(106): or 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Cylinder &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(108): or 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Cone &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(110): or 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Sphere &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(112): or 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Torus &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> while trying to match the argument list '(Handle_Geom_BezierSurface, double, double, double, double)' 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(2267): warning C4800: 'Standard_Boolean' : forcing value to bool 'true' or 'false' (performance warning) 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(7913): error C2440: '<function-style-cast>' : cannot convert from 'Handle_Geom_RectangularTrimmedSurface' to 'BRepBuilderAPI_MakeFace' 2> No constructor could take the source type, or constructor overload resolution was ambiguous 2> 2>Build FAILED. 2> 2>Time Elapsed 00:00:01.52 3>------ Build started: Project: ALL_BUILD, Configuration: Debug x64 ------ 3>Build started 2012/11/3 23:41:54. 3>InitializeBuildStatus: 3> Creating "x64\Debug\ALL_BUILD\ALL_BUILD.unsuccessfulbuild" because "AlwaysCreate" was specified. 3>CustomBuild: 3> Build all projects 3>FinalizeBuildStatus: 3> Deleting file "x64\Debug\ALL_BUILD\ALL_BUILD.unsuccessfulbuild". 3> Touching "x64\Debug\ALL_BUILD\ALL_BUILD.lastbuildstate". 3> 3>Build succeeded. 3> 3>Time Elapsed 00:00:02.02 4>------ Skipped Build: Project: INSTALL, Configuration: Debug x64 ------ 4>Project not selected to build for this solution configuration ========== Build: 2 succeeded, 1 failed, 7 up-to-date, 1 skipped ========== Could you please take a look at it for me? Thanks, Zhanghong Tang --- On Sat, 11/3/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> wrote: From: Iulian Grindeanu <iulian(a)mcs.anl.gov> Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010? To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> Cc: "CGMA Development" <cgma-dev(a)mcs.anl.gov> Date: Saturday, November 3, 2012, 10:30 PM #yiv1112316354 p {margin:0;} Dear Dr. Grindeanu, Thank you very much for your kindly reply. With the help of CMake I have successfully build the libraries. There are 7 libs generated: cgma_init.lib cholla.lib cubit_facet.lib cubit_facetboolstub.lib cubit_geom.lib cubit_util.lib cubit_virtual.lib Hello, So I assume you are on the main branch. You can't use CGM without a geometry engine. Did you read my previous e-mail? You will need to configure with OCC or Cubit. Sorry, I can't be of more help. Iulian I tried to build a simple test "brick.cpp", however, there are some errors when run the example: Facet-based geometry modification is a beta capability. ERROR: This capability is currently disabled. To enable this capability, issue the command 'set developer commands on'. ERROR: In GeometryModifyTool::brick Problem creating a brick. Assertion failed: brick != 0, file ..\test\brick.cpp, line 42 I would like to do a simple test: 1) build a box and a sphere with both center at (0,0,0) and size 1; 2) do boolean operations such as intersection between the box and sphere; 3) output the result to an OFF file. Could anyone give me such a simple example? Thanks, Zhanghong Tang --- On Fri, 11/2/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> wrote: From: Iulian Grindeanu <iulian(a)mcs.anl.gov> Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010? To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> Cc: cgma-dev(a)mcs.anl.gov Date: Friday, November 2, 2012, 11:21 PM #yiv1112316354 p {margin:0;}Hello, I don't know if anybody tried building on Windows, maybe Jane or Tim know. You have to configure with a geometric engine. If you don't have Cubit for your platform, you will need to configure with OCC It seems that you use cygwin. I know that OCC can be build on Windows, on VS 2010. (http://www.opencascade.org/getocc/require/) You then can try configuring on cygwin with occ. And then look at Makefiles generated to see what would be needed for projects in VS. Or is there a cmake-based build? I think that would be easier to port to Windows. Iulian Dear all, I am trying to build the CGMA on Windows 7 64bit + VS2010. I have attached the project. However, there are hundreds of errors such as: 2>CGMAD.lib(DAG.obj) : error LNK2019: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) referenced in function "public: enum CubitStatus __cdecl DAG::get_children_at_level(class DLIList<class ModelEntity *> &,int,class DLIList<class ModelEntity *> &)" (?get_children_at_level@DAG@@QEAA?AW4CubitStatus@@AEAV?$DLIList@PEAVModelEntity@@@@H0@Z) 2>CGMAD.lib(CAActuateSet.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) 2>CGMAD.lib(PartitionTool.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) 2>CGMAD.lib(CompositeTool.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) 2>CGMAD.lib(TopologyEntity.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) Could anyone help me to take a look at it and give me some hints on how to setup the project or modify some code to successfully build the project? Thanks, Zhanghong Tang

1 0

Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010?
by Zhanghong Tang 03 Nov '12

03 Nov '12

Dear Dr. Grindeanu, Thank you very much for your kindly reply. The built to project 'cubit_OOC' is still failed because of the errors I posted in my previous email. I used the CMake to build the CGMA projects by the aid of CMakeLists.txt. I used the default settings when configuring by CMake, except that I provided the 'OOC_INCLUDE' and 'OOC_LIBRARY' required by CMake when configuring. Thanks, Zhanghong Tang --- On Sun, 11/4/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> wrote: From: Iulian Grindeanu <iulian(a)mcs.anl.gov> Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010? To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> Date: Sunday, November 4, 2012, 12:51 AM #yiv12226462 p {margin:0;}Hello, It would be good if you can make it work. How did you configure ? Using ccmake or autotools in cygwin? You should configure with-occ OR with-cubit, if you have cubit. It seems that you installed occ, so configure ONLY with-occ. I will be out of email until Monday Iulian Dear Dr. Grindeanu, Thank you very much for pointing out my problem. I thought that the CGMA can work without any other package. Now I have installed Open CASCADE Technology 6.5.3 and rebuild the CGMA project (reset the path by CMake and create the VS2010 projects), the following error displayed when build the cubit_OCC project: 1>------ Build started: Project: ZERO_CHECK, Configuration: Debug x64 ------ 1>Build started 2012/11/3 23:41:53. 1>InitializeBuildStatus: 1> Creating "x64\Debug\ZERO_CHECK\ZERO_CHECK.unsuccessfulbuild" because "AlwaysCreate" was specified. 1>FinalizeBuildStatus: 1> Deleting file "x64\Debug\ZERO_CHECK\ZERO_CHECK.unsuccessfulbuild". 1> Touching "x64\Debug\ZERO_CHECK\ZERO_CHECK.lastbuildstate". 1> 1>Build succeeded. 1> 1>Time Elapsed 00:00:00.06 2>------ Build started: Project: cubit_OCC, Configuration: Debug x64 ------ 2>Build started 2012/11/3 23:41:53. 2>InitializeBuildStatus: 2> Touching "cubit_OCC.dir\Debug\cubit_OCC.unsuccessfulbuild". 2>CustomBuild: 2> All outputs are up-to-date. 2>ClCompile: 2> OCCModifyEngine.cpp 2>E:\cgma-12.2.0b1\util\CubitMessage.hpp(400): warning C4138: '*/' found outside of comment 2>E:\cgma-12.2.0b1\geom\GeometryQueryEngine.hpp(259): warning C4138: '*/' found outside of comment 2>E:\cgma-12.2.0b1\geom\GeometryQueryEngine.hpp(260): warning C4138: '*/' found outside of comment 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(715): error C2440: '<function-style-cast>' : cannot convert from 'Handle_Geom_RectangularTrimmedSurface' to 'BRepBuilderAPI_MakeFace' 2> No constructor could take the source type, or constructor overload resolution was ambiguous 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(725): error C2440: '<function-style-cast>' : cannot convert from 'Handle_Geom_RectangularTrimmedSurface' to 'BRepBuilderAPI_MakeFace' 2> No constructor could take the source type, or constructor overload resolution was ambiguous 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(744): error C2665: 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace' : none of the 23 overloads could convert all the argument types 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(104): could be 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Pln &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(106): or 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Cylinder &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(108): or 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Cone &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(110): or 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Sphere &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> C:\OpenCASCADE6.5.3\ros\inc\BRepBuilderAPI_MakeFace.hxx(112): or 'BRepBuilderAPI_MakeFace::BRepBuilderAPI_MakeFace(const gp_Torus &,const Standard_Real,const Standard_Real,const Standard_Real,const Standard_Real)' 2> while trying to match the argument list '(Handle_Geom_BezierSurface, double, double, double, double)' 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(2267): warning C4800: 'Standard_Boolean' : forcing value to bool 'true' or 'false' (performance warning) 2>..\..\..\geom\OCC\OCCModifyEngine.cpp(7913): error C2440: '<function-style-cast>' : cannot convert from 'Handle_Geom_RectangularTrimmedSurface' to 'BRepBuilderAPI_MakeFace' 2> No constructor could take the source type, or constructor overload resolution was ambiguous 2> 2>Build FAILED. 2> 2>Time Elapsed 00:00:01.52 3>------ Build started: Project: ALL_BUILD, Configuration: Debug x64 ------ 3>Build started 2012/11/3 23:41:54. 3>InitializeBuildStatus: 3> Creating "x64\Debug\ALL_BUILD\ALL_BUILD.unsuccessfulbuild" because "AlwaysCreate" was specified. 3>CustomBuild: 3> Build all projects 3>FinalizeBuildStatus: 3> Deleting file "x64\Debug\ALL_BUILD\ALL_BUILD.unsuccessfulbuild". 3> Touching "x64\Debug\ALL_BUILD\ALL_BUILD.lastbuildstate". 3> 3>Build succeeded. 3> 3>Time Elapsed 00:00:02.02 4>------ Skipped Build: Project: INSTALL, Configuration: Debug x64 ------ 4>Project not selected to build for this solution configuration ========== Build: 2 succeeded, 1 failed, 7 up-to-date, 1 skipped ========== Could you please take a look at it for me? Thanks, Zhanghong Tang --- On Sat, 11/3/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> wrote: From: Iulian Grindeanu <iulian(a)mcs.anl.gov> Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010? To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> Cc: "CGMA Development" <cgma-dev(a)mcs.anl.gov> Date: Saturday, November 3, 2012, 10:30 PM #yiv12226462 p {margin:0;} Dear Dr. Grindeanu, Thank you very much for your kindly reply. With the help of CMake I have successfully build the libraries. There are 7 libs generated: cgma_init.lib cholla.lib cubit_facet.lib cubit_facetboolstub.lib cubit_geom.lib cubit_util.lib cubit_virtual.lib Hello, So I assume you are on the main branch. You can't use CGM without a geometry engine. Did you read my previous e-mail? You will need to configure with OCC or Cubit. Sorry, I can't be of more help. Iulian I tried to build a simple test "brick.cpp", however, there are some errors when run the example: Facet-based geometry modification is a beta capability. ERROR: This capability is currently disabled. To enable this capability, issue the command 'set developer commands on'. ERROR: In GeometryModifyTool::brick Problem creating a brick. Assertion failed: brick != 0, file ..\test\brick.cpp, line 42 I would like to do a simple test: 1) build a box and a sphere with both center at (0,0,0) and size 1; 2) do boolean operations such as intersection between the box and sphere; 3) output the result to an OFF file. Could anyone give me such a simple example? Thanks, Zhanghong Tang --- On Fri, 11/2/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> wrote: From: Iulian Grindeanu <iulian(a)mcs.anl.gov> Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010? To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> Cc: cgma-dev(a)mcs.anl.gov Date: Friday, November 2, 2012, 11:21 PM #yiv12226462 p {margin:0;}Hello, I don't know if anybody tried building on Windows, maybe Jane or Tim know. You have to configure with a geometric engine. If you don't have Cubit for your platform, you will need to configure with OCC It seems that you use cygwin. I know that OCC can be build on Windows, on VS 2010. (http://www.opencascade.org/getocc/require/) You then can try configuring on cygwin with occ. And then look at Makefiles generated to see what would be needed for projects in VS. Or is there a cmake-based build? I think that would be easier to port to Windows. Iulian Dear all, I am trying to build the CGMA on Windows 7 64bit + VS2010. I have attached the project. However, there are hundreds of errors such as: 2>CGMAD.lib(DAG.obj) : error LNK2019: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) referenced in function "public: enum CubitStatus __cdecl DAG::get_children_at_level(class DLIList<class ModelEntity *> &,int,class DLIList<class ModelEntity *> &)" (?get_children_at_level@DAG@@QEAA?AW4CubitStatus@@AEAV?$DLIList@PEAVModelEntity@@@@H0@Z) 2>CGMAD.lib(CAActuateSet.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) 2>CGMAD.lib(PartitionTool.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) 2>CGMAD.lib(CompositeTool.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) 2>CGMAD.lib(TopologyEntity.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) Could anyone help me to take a look at it and give me some hints on how to setup the project or modify some code to successfully build the project? Thanks, Zhanghong Tang

1 0

Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010?
by Iulian Grindeanu 03 Nov '12

03 Nov '12

----- Original Message ----- | Dear Dr. Grindeanu, | Thank you very much for your kindly reply. With the help of CMake I | have successfully build the libraries. There are 7 libs generated: | cgma_init.lib | cholla.lib | cubit_facet.lib | cubit_facetboolstub.lib | cubit_geom.lib | cubit_util.lib | cubit_virtual.lib Hello, So I assume you are on the main branch. You can't use CGM without a geometry engine. Did you read my previous e-mail? You will need to configure with OCC or Cubit. Sorry, I can't be of more help. Iulian | I tried to build a simple test "brick.cpp", however, there are some | errors when run the example: | Facet-based geometry modification is a beta capability. | ERROR: This capability is currently disabled. | To enable this capability, issue the command 'set developer commands | on'. | ERROR: In GeometryModifyTool::brick | Problem creating a brick. | Assertion failed: brick != 0, file ..\test\brick.cpp, line 42 | I would like to do a simple test: | 1) build a box and a sphere with both center at (0,0,0) and size 1; | 2) do boolean operations such as intersection between the box and | sphere; | 3) output the result to an OFF file. | Could anyone give me such a simple example? | Thanks, | Zhanghong Tang | --- On Fri, 11/2/12, Iulian Grindeanu <iulian(a)mcs.anl.gov> wrote: | | From: Iulian Grindeanu <iulian(a)mcs.anl.gov> | | Subject: Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + | | VS2010? | | To: "Zhanghong Tang" <tangzhanghong98(a)yahoo.com> | | Cc: cgma-dev(a)mcs.anl.gov | | Date: Friday, November 2, 2012, 11:21 PM | | Hello, | | I don't know if anybody tried building on Windows, maybe Jane or Tim | | know. | | You have to configure with a geometric engine. If you don't have | | Cubit | | for your platform, you will need to configure with OCC | | It seems that you use cygwin. I know that OCC can be build on | | Windows, | | on VS 2010. | | (http://www.opencascade.org/getocc/require/) | | You then can try configuring on cygwin with occ. And then look at | | Makefiles generated to see what would be needed for projects in VS. | | Or | | is there a cmake-based build? I think that would be easier to port | | to | | Windows. | | Iulian | | | Dear all, | | | I am trying to build the CGMA on Windows 7 64bit + VS2010. I have | | | attached the project. However, there are hundreds of errors such | | | as: | | | 2>CGMAD.lib(DAG.obj) : error LNK2019: unresolved external symbol | | | "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class | | | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | referenced in function "public: enum CubitStatus __cdecl | | | DAG::get_children_at_level(class DLIList<class ModelEntity *> | | | &,int,class DLIList<class ModelEntity *> &)" | | | (?get_children_at_level@DAG@@QEAA?AW4CubitStatus@@AEAV?$DLIList@PEAVModelEntity@@@@H0@Z) | | | 2>CGMAD.lib(CAActuateSet.obj) : error LNK2001: unresolved external | | | symbol "public: __cdecl DLIList<class ModelEntity | | | *>::~DLIList<class | | | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | 2>CGMAD.lib(PartitionTool.obj) : error LNK2001: unresolved | | | external | | | symbol "public: __cdecl DLIList<class ModelEntity | | | *>::~DLIList<class | | | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | 2>CGMAD.lib(CompositeTool.obj) : error LNK2001: unresolved | | | external | | | symbol "public: __cdecl DLIList<class ModelEntity | | | *>::~DLIList<class | | | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | 2>CGMAD.lib(TopologyEntity.obj) : error LNK2001: unresolved | | | external | | | symbol "public: __cdecl DLIList<class ModelEntity | | | *>::~DLIList<class | | | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | | | Could anyone help me to take a look at it and give me some hints | | | on | | | how to setup the project or modify some code to successfully build | | | the | | | project? | | | Thanks, | | | Zhanghong Tang

1 0

r5851 - cgm/trunk/itaps
by janehu＠mcs.anl.gov 02 Nov '12

02 Nov '12

Author: janehu Date: 2012-11-02 12:40:36 -0500 (Fri, 02 Nov 2012) New Revision: 5851 Modified: cgm/trunk/itaps/Makefile.am cgm/trunk/itaps/testgeom.cc Log: Fixed the configure problem for cgm on cubit13.1, now, besides cubit13.1 library's get_graphics function not working, which is commented out for now, both testcases are passing in itaps directory for make check. Modified: cgm/trunk/itaps/Makefile.am =================================================================== --- cgm/trunk/itaps/Makefile.am 2012-11-02 17:22:55 UTC (rev 5850) +++ cgm/trunk/itaps/Makefile.am 2012-11-02 17:40:36 UTC (rev 5851) @@ -25,7 +25,11 @@ libiGeom_la_includedir = $(includedir) -libiGeom_la_LIBADD = $(top_builddir)/libcgm.la +if BUILD_CGM + libiGeom_la_LIBADD = $(top_builddir)/libcgm.la +else + libiGeom_la_LIBADD = -lcubiti19 -lcubit_geom -lcubit_util $(top_builddir)/init/libcgma_init.la $(top_builddir)/geom/libcubit_geom.la +endif AM_CPPFLAGS += $(HAVE_ACIS_DEF) \ $(HAVE_OCC_DEF) \ @@ -44,13 +48,13 @@ CATag.cpp \ iGeom_CGMA.cc \ iGeomError.cc \ - iGeomError.h + iGeomError.h libiGeom_la_include_HEADERS = \ iBase.h \ iGeom_FCDefs.h \ iGeom_protos.h \ - iBase_f.h + iBase_f.h if ITAPS_SHIM AM_CPPFLAGS += -DITAPS_SHIM @@ -66,8 +70,13 @@ check_PROGRAMS = chaman $(TESTS) -LDADD = libiGeom.la $(top_builddir)/geom/libcubit_geom.la $(top_builddir)/util/libcubit_util.la -AM_LDFLAGS += $(CGM_EXT_LTFLAGS) $(CGM_EXT_LDFLAGS) +if BUILD_CGM + LDADD = libiGeom.la $(top_builddir)/geom/libcubit_geom.la $(top_builddir)/util/libcubit_util.la +else + LDADD = libiGeom.la +endif + +AM_LDFLAGS += $(CGM_EXT_LTFLAGS) $(CGM_EXT_LDFLAGS) testgeom_SOURCES = testgeom.cc testgeom_occ_SOURCES = $(testgeom_SOURCES) testgeom_occ_CPPFLAGS = $(CPPFLAGS) $(AM_CPPFLAGS) -DFORCE_OCC Modified: cgm/trunk/itaps/testgeom.cc

1 0

Re: [cgma-dev] How to build the CGMA on Windows 7 64bit + VS2010?
by Iulian Grindeanu 02 Nov '12

02 Nov '12

Hello, I don't know if anybody tried building on Windows, maybe Jane or Tim know. You have to configure with a geometric engine. If you don't have Cubit for your platform, you will need to configure with OCC It seems that you use cygwin. I know that OCC can be build on Windows, on VS 2010. (http://www.opencascade.org/getocc/require/) You then can try configuring on cygwin with occ. And then look at Makefiles generated to see what would be needed for projects in VS. Or is there a cmake-based build? I think that would be easier to port to Windows. Iulian ----- Original Message ----- | Dear all, | I am trying to build the CGMA on Windows 7 64bit + VS2010. I have | attached the project. However, there are hundreds of errors such as: | 2>CGMAD.lib(DAG.obj) : error LNK2019: unresolved external symbol | "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | referenced in function "public: enum CubitStatus __cdecl | DAG::get_children_at_level(class DLIList<class ModelEntity *> | &,int,class DLIList<class ModelEntity *> &)" | (?get_children_at_level@DAG@@QEAA?AW4CubitStatus@@AEAV?$DLIList@PEAVModelEntity@@@@H0@Z) | 2>CGMAD.lib(CAActuateSet.obj) : error LNK2001: unresolved external | symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | 2>CGMAD.lib(PartitionTool.obj) : error LNK2001: unresolved external | symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | 2>CGMAD.lib(CompositeTool.obj) : error LNK2001: unresolved external | symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | 2>CGMAD.lib(TopologyEntity.obj) : error LNK2001: unresolved external | symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class | ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) | Could anyone help me to take a look at it and give me some hints on | how to setup the project or modify some code to successfully build the | project? | Thanks, | Zhanghong Tang

1 0

How to build the CGMA on Windows 7 64bit + VS2010?
by Zhanghong Tang 02 Nov '12

02 Nov '12

Dear all, I am trying to build the CGMA on Windows 7 64bit + VS2010. I have attached the project. However, there are hundreds of errors such as: 2>CGMAD.lib(DAG.obj) : error LNK2019: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) referenced in function "public: enum CubitStatus __cdecl DAG::get_children_at_level(class DLIList<class ModelEntity *> &,int,class DLIList<class ModelEntity *> &)" (?get_children_at_level@DAG@@QEAA?AW4CubitStatus@@AEAV?$DLIList@PEAVModelEntity@@@@H0@Z) 2>CGMAD.lib(CAActuateSet.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) 2>CGMAD.lib(PartitionTool.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) 2>CGMAD.lib(CompositeTool.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) 2>CGMAD.lib(TopologyEntity.obj) : error LNK2001: unresolved external symbol "public: __cdecl DLIList<class ModelEntity *>::~DLIList<class ModelEntity *>(void)" (??1?$DLIList@PEAVModelEntity@@@@QEAA@XZ) Could anyone help me to take a look at it and give me some hints on how to setup the project or modify some code to successfully build the project? Thanks, Zhanghong Tang

1 0