April 2011 - cgma-dev - mailman3.cels.anl.gov

r4786 - cgm/trunk/geom/OCC
by jiangtao_ma＠yahoo.com 29 Apr '11

29 Apr '11

Author: janehu Date: 2011-04-29 11:20:04 -0500 (Fri, 29 Apr 2011) New Revision: 4786 Modified: cgm/trunk/geom/OCC/occ_patches Log: give the pathes to the patches. Added one from r4440 back. Modified: cgm/trunk/geom/OCC/occ_patches =================================================================== --- cgm/trunk/geom/OCC/occ_patches 2011-04-28 23:15:21 UTC (rev 4785) +++ cgm/trunk/geom/OCC/occ_patches 2011-04-29 16:20:04 UTC (rev 4786) @@ -1,38 +1,5 @@ ---- BRepClass_FaceClassifier.cxx_old 2011-04-28 10:16:13.000000000 -0500 -+++ BRepClass_FaceClassifier.cxx 2011-04-28 10:16:51.000000000 -0500 -@@ -55,6 +55,7 @@ - Extrema_ExtPS myExtrem; - //-- myExtrem.Initialize(HS, U1, U2, V1, V2, Tol, Tol); - myExtrem.Initialize(Surf, U1, U2, V1, V2, Tol, Tol); -+ myExtrem.Perform(P); - //---------------------------------------------------------- - //-- On cherche le point le plus proche , PUIS - //-- On le classifie. ---- Extrema_ExtPS.cxx_old 2011-04-28 10:13:52.000000000 -0500 -+++ Extrema_ExtPS.cxx 2011-04-28 10:15:46.000000000 -0500 -@@ -88,10 +88,18 @@ - Standard_Real U, V; - PS.Parameter(U, V); - if (myS->IsUPeriodic()) { -- U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); -+ Standard_Real Uupper = myuinf+myS->UPeriod(); -+ if(U>(myuinf-mytolu) && U < myuinf) U = myuinf; -+ else if(U < (Uupper+mytolu) && U > Uupper) U = Uupper; -+ else -+ U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); - } - if (myS->IsVPeriodic()) { -- V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); -+ Standard_Real Vupper = myvinf+myS->VPeriod(); -+ if(V>(myvinf-mytolv) && V < myvinf) V = myvinf; -+ else if(V < (Vupper+mytolv) && V > Vupper) V = Vupper; -+ else -+ V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); - } - if ((myuinf-U) <= mytolu && (U-myusup) <= mytolu && - (myvinf-V) <= mytolv && (V-myvsup) <= mytolv) { ---- Extrema_ExtPElS.cxx_old 2011-04-28 11:48:39.000000000 -0500 -+++ Extrema_ExtPElS.cxx 2011-04-28 10:13:38.000000000 -0500 +--- OpenCASCADE6.3.0/ros/src/Extrema/Extrema_ExtPElS.cxx 2011-04-28 11:48:39.000000000 -0500 ++++ Extrema_ExtPElS.cxx 2011-04-29 10:16:43.000000000 -0500 @@ -56,6 +56,7 @@ gp_Vec myZ = Pos.XDirection()^Pos.YDirection(); Standard_Real U1 = gp_Vec(Pos.XDirection()).AngleWithRef(OPp,myZ); //-PI<U1<PI @@ -76,3 +43,52 @@ if (V1 < 0.) { V1 += 2. * PI; } if (V2 < 0.) { V2 += 2. * PI; } +--- OpenCASCADE6.3.0/ros/src/Extrema/Extrema_ExtPS.cxx 2011-04-28 10:13:52.000000000 -0500 ++++ Extrema_ExtPS.cxx 2011-04-29 10:16:43.000000000 -0500

1 0

buildbot failure in cgm-occ: failed test
by cgma-dev＠mcs.anl.gov 29 Apr '11

29 Apr '11

1 0

Re: [cgma-dev] r4782 - cgm/trunk/geom/OCC
by Iulian Grindeanu 28 Apr '11

28 Apr '11

Hello, What is the command to apply the patch? Where do we have to be in the source code to apply it? I did not manage to build occ in my own space, so I am reluctant to apply it in the fathom build. I never applied a patch :( read_cgm_test fails in moab, but meshkit tests work fine (so everything built parallel, occ, static) So in my occ based build, test_occ fails in cgm, read_cgm_test fails on moab, Lasso test fails, but all meshkit tests pass Lasso tests fails on cubit 12 based build too, that is the only error in that build. Thanks, Iulian ----- Original Message ----- > occ_patches is a patch file you can apply to the OCC 6.3 source > (there's a similar occ_patches_6.5 for OCC 6.5). From > what Jane has said, after applying that all the tests should run. > > - tim > > On 04/28/2011 01:54 PM, Iulian Grindeanu wrote: > > Hello, > > I have a question about cgm build configured with occ. I have an > > error in test/test_occ (it does not pass) > > With the debugger, I see that the error is happening in > > Extrema_ExtPS. > > > > backtrace > > #0 OCCSurface::u_v_from_position (this=0xcbe880, location=..., > > u=@0x7fffffffdec8, v=@0x7fffffffdec0, > > closest_location=0x7fffffffdcf0) at OCCSurface.cpp:428 > > #1 0x00000000005a8847 in RefFace::u_v_from_position (this=0xcd7d90, > > location=..., u=@0x7fffffffdec8, v=@0x7fffffffdec0, > > closest_location=0x7fffffffdcf0) at RefFace.cpp:908 > > #2 0x0000000000420643 in main (argc=1, argv=0x7fffffffe018) at > > test_occ.cpp:98 > > > > > > Then I see that some patches are required. > > > > Do we have to modify the occ source code? What is occ_patches? > > How do we do that? > > We are using an occ build 6.3.0, which was last build on Sep 23, > > 2009 > > > > The build is here, for mcs network > > /homes/fathom/3rdparty/occ/OpenCASCADE6.3.0/ > > (installed library is at > > /homes/fathom/3rdparty/occ/OpenCASCADE6.3.0/gcc) > > > > What am I missing? > > > > Thanks, > > Iulian > > > > ----- Original Message ----- > >> Author: janehu > >> Date: 2011-04-28 11:53:43 -0500 (Thu, 28 Apr 2011) > >> New Revision: 4782 > >> > >> Modified: > >> cgm/trunk/geom/OCC/occ_patches > >> Log: > >> Correct previous patches for OCC6.3 build, which caused testcase > >> check > >> failure on gnep. > >> > >> Modified: cgm/trunk/geom/OCC/occ_patches > >> =================================================================== > >> --- cgm/trunk/geom/OCC/occ_patches 2011-04-28 00:36:18 UTC (rev > >> 4781) > >> +++ cgm/trunk/geom/OCC/occ_patches 2011-04-28 16:53:43 UTC (rev > >> 4782) > >> @@ -1,118 +1,78 @@ > >> ---- ros/src/Extrema/Extrema_ExtPElS.cxx 2011-03-29 > >> 11:35:08.000000000 > >> -0500 > >> -+++ > >> /mnt/disk2b/jhu/tempdir/OpenCASCADE6.3.0/ros/src/Extrema/Extrema_ExtPElS.cxx > >> 2002-04-23 11:10:21.000000000 -0500 > >> -@@ -56,7 +56,6 @@ > >> +--- BRepClass_FaceClassifier.cxx_old 2011-04-28 10:16:13.000000000 > >> -0500 > >> ++++ BRepClass_FaceClassifier.cxx 2011-04-28 10:16:51.000000000 > >> -0500 > >> +@@ -55,6 +55,7 @@ > >> + Extrema_ExtPS myExtrem; > >> + //-- myExtrem.Initialize(HS, U1, U2, V1, V2, Tol, Tol); > >> + myExtrem.Initialize(Surf, U1, U2, V1, V2, Tol, Tol); > >> ++ myExtrem.Perform(P); > >> + //---------------------------------------------------------- > >> + //-- On cherche le point le plus proche , PUIS > >> + //-- On le classifie. > >> +--- Extrema_ExtPS.cxx_old 2011-04-28 10:13:52.000000000 -0500 > >> ++++ Extrema_ExtPS.cxx 2011-04-28 10:15:46.000000000 -0500 > >> +@@ -88,10 +88,18 @@ > >> + Standard_Real U, V; > >> + PS.Parameter(U, V); > >> + if (myS->IsUPeriodic()) { > >> +- U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); > >> ++ Standard_Real Uupper = myuinf+myS->UPeriod(); > >> ++ if(U>(myuinf-mytolu)&& U< myuinf) U = myuinf; > >> ++ else if(U< (Uupper+mytolu)&& U> Uupper) U = Uupper; > >> ++ else > >> ++ U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); > >> + } > >> + if (myS->IsVPeriodic()) { > >> +- V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); > >> ++ Standard_Real Vupper = myvinf+myS->VPeriod(); > >> ++ if(V>(myvinf-mytolv)&& V< myvinf) V = myvinf; > >> ++ else if(V< (Vupper+mytolv)&& V> Vupper) V = Vupper; > >> ++ else > >> ++ V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); > >> + } > >> + if ((myuinf-U)<= mytolu&& (U-myusup)<= mytolu&& > >> + (myvinf-V)<= mytolv&& (V-myvsup)<= mytolv) { > >> +--- Extrema_ExtPElS.cxx_old 2011-04-28 11:48:39.000000000 -0500 > >> ++++ Extrema_ExtPElS.cxx 2011-04-28 10:13:38.000000000 -0500 > >> +@@ -56,6 +56,7 @@ > >> gp_Vec myZ = Pos.XDirection()^Pos.YDirection(); > >> Standard_Real U1 = gp_Vec(Pos.XDirection()).AngleWithRef(OPp,myZ); > >> //-PI<U1<PI > >> Standard_Real U2 = U1 + PI; > >> -- if(U1> -Tol&& U1< 0.) {U1 = 0.;} > >> ++ if(U1> -Tol&& U1< 0.) {U1 = 0.;} > >> if (U1< 0.) { U1 += 2. * PI; } > >> - > > > > -- > ================================================================ > "You will keep in perfect peace him whose mind is > steadfast, because he trusts in you." Isaiah 26:3 > > Tim Tautges Argonne National Laboratory > (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) > phone: (608) 263-8485 1500 Engineering Dr. > fax: (608) 263-4499 Madison, WI 53706

1 0

Re: [cgma-dev] r4782 - cgm/trunk/geom/OCC
by Tim Tautges 28 Apr '11

28 Apr '11

occ_patches is a patch file you can apply to the OCC 6.3 source (there's a similar occ_patches_6.5 for OCC 6.5). From what Jane has said, after applying that all the tests should run. - tim On 04/28/2011 01:54 PM, Iulian Grindeanu wrote: > Hello, > I have a question about cgm build configured with occ. I have an error in test/test_occ (it does not pass) > With the debugger, I see that the error is happening in Extrema_ExtPS. > > backtrace > #0 OCCSurface::u_v_from_position (this=0xcbe880, location=..., u=@0x7fffffffdec8, v=@0x7fffffffdec0, closest_location=0x7fffffffdcf0) at OCCSurface.cpp:428 > #1 0x00000000005a8847 in RefFace::u_v_from_position (this=0xcd7d90, location=..., u=@0x7fffffffdec8, v=@0x7fffffffdec0, closest_location=0x7fffffffdcf0) at RefFace.cpp:908 > #2 0x0000000000420643 in main (argc=1, argv=0x7fffffffe018) at test_occ.cpp:98 > > > Then I see that some patches are required. > > Do we have to modify the occ source code? What is occ_patches? > How do we do that? > We are using an occ build 6.3.0, which was last build on Sep 23, 2009 > > The build is here, for mcs network > /homes/fathom/3rdparty/occ/OpenCASCADE6.3.0/ > (installed library is at /homes/fathom/3rdparty/occ/OpenCASCADE6.3.0/gcc) > > What am I missing? > > Thanks, > Iulian > > ----- Original Message ----- >> Author: janehu >> Date: 2011-04-28 11:53:43 -0500 (Thu, 28 Apr 2011) >> New Revision: 4782 >> >> Modified: >> cgm/trunk/geom/OCC/occ_patches >> Log: >> Correct previous patches for OCC6.3 build, which caused testcase check >> failure on gnep. >> >> Modified: cgm/trunk/geom/OCC/occ_patches >> =================================================================== >> --- cgm/trunk/geom/OCC/occ_patches 2011-04-28 00:36:18 UTC (rev 4781) >> +++ cgm/trunk/geom/OCC/occ_patches 2011-04-28 16:53:43 UTC (rev 4782) >> @@ -1,118 +1,78 @@ >> ---- ros/src/Extrema/Extrema_ExtPElS.cxx 2011-03-29 11:35:08.000000000 >> -0500 >> -+++ >> /mnt/disk2b/jhu/tempdir/OpenCASCADE6.3.0/ros/src/Extrema/Extrema_ExtPElS.cxx >> 2002-04-23 11:10:21.000000000 -0500 >> -@@ -56,7 +56,6 @@ >> +--- BRepClass_FaceClassifier.cxx_old 2011-04-28 10:16:13.000000000 >> -0500 >> ++++ BRepClass_FaceClassifier.cxx 2011-04-28 10:16:51.000000000 -0500 >> +@@ -55,6 +55,7 @@ >> + Extrema_ExtPS myExtrem; >> + //-- myExtrem.Initialize(HS, U1, U2, V1, V2, Tol, Tol); >> + myExtrem.Initialize(Surf, U1, U2, V1, V2, Tol, Tol); >> ++ myExtrem.Perform(P); >> + //---------------------------------------------------------- >> + //-- On cherche le point le plus proche , PUIS >> + //-- On le classifie. >> +--- Extrema_ExtPS.cxx_old 2011-04-28 10:13:52.000000000 -0500 >> ++++ Extrema_ExtPS.cxx 2011-04-28 10:15:46.000000000 -0500 >> +@@ -88,10 +88,18 @@ >> + Standard_Real U, V; >> + PS.Parameter(U, V); >> + if (myS->IsUPeriodic()) { >> +- U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); >> ++ Standard_Real Uupper = myuinf+myS->UPeriod(); >> ++ if(U>(myuinf-mytolu)&& U< myuinf) U = myuinf; >> ++ else if(U< (Uupper+mytolu)&& U> Uupper) U = Uupper; >> ++ else >> ++ U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); >> + } >> + if (myS->IsVPeriodic()) { >> +- V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); >> ++ Standard_Real Vupper = myvinf+myS->VPeriod(); >> ++ if(V>(myvinf-mytolv)&& V< myvinf) V = myvinf; >> ++ else if(V< (Vupper+mytolv)&& V> Vupper) V = Vupper; >> ++ else >> ++ V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); >> + } >> + if ((myuinf-U)<= mytolu&& (U-myusup)<= mytolu&& >> + (myvinf-V)<= mytolv&& (V-myvsup)<= mytolv) { >> +--- Extrema_ExtPElS.cxx_old 2011-04-28 11:48:39.000000000 -0500 >> ++++ Extrema_ExtPElS.cxx 2011-04-28 10:13:38.000000000 -0500 >> +@@ -56,6 +56,7 @@ >> gp_Vec myZ = Pos.XDirection()^Pos.YDirection(); >> Standard_Real U1 = gp_Vec(Pos.XDirection()).AngleWithRef(OPp,myZ); >> //-PI<U1<PI >> Standard_Real U2 = U1 + PI; >> -- if(U1> -Tol&& U1< 0.) {U1 = 0.;} >> ++ if(U1> -Tol&& U1< 0.) {U1 = 0.;} >> if (U1< 0.) { U1 += 2. * PI; } >> - > -- ================================================================ "You will keep in perfect peace him whose mind is steadfast, because he trusts in you." Isaiah 26:3 Tim Tautges Argonne National Laboratory (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) phone: (608) 263-8485 1500 Engineering Dr. fax: (608) 263-4499 Madison, WI 53706

1 0

Re: [cgma-dev] r4782 - cgm/trunk/geom/OCC
by Iulian Grindeanu 28 Apr '11

28 Apr '11

Hello, I have a question about cgm build configured with occ. I have an error in test/test_occ (it does not pass) With the debugger, I see that the error is happening in Extrema_ExtPS. backtrace #0 OCCSurface::u_v_from_position (this=0xcbe880, location=..., u=@0x7fffffffdec8, v=@0x7fffffffdec0, closest_location=0x7fffffffdcf0) at OCCSurface.cpp:428 #1 0x00000000005a8847 in RefFace::u_v_from_position (this=0xcd7d90, location=..., u=@0x7fffffffdec8, v=@0x7fffffffdec0, closest_location=0x7fffffffdcf0) at RefFace.cpp:908 #2 0x0000000000420643 in main (argc=1, argv=0x7fffffffe018) at test_occ.cpp:98 Then I see that some patches are required. Do we have to modify the occ source code? What is occ_patches? How do we do that? We are using an occ build 6.3.0, which was last build on Sep 23, 2009 The build is here, for mcs network /homes/fathom/3rdparty/occ/OpenCASCADE6.3.0/ (installed library is at /homes/fathom/3rdparty/occ/OpenCASCADE6.3.0/gcc) What am I missing? Thanks, Iulian ----- Original Message ----- > Author: janehu > Date: 2011-04-28 11:53:43 -0500 (Thu, 28 Apr 2011) > New Revision: 4782 > > Modified: > cgm/trunk/geom/OCC/occ_patches > Log: > Correct previous patches for OCC6.3 build, which caused testcase check > failure on gnep. > > Modified: cgm/trunk/geom/OCC/occ_patches > =================================================================== > --- cgm/trunk/geom/OCC/occ_patches 2011-04-28 00:36:18 UTC (rev 4781) > +++ cgm/trunk/geom/OCC/occ_patches 2011-04-28 16:53:43 UTC (rev 4782) > @@ -1,118 +1,78 @@ > ---- ros/src/Extrema/Extrema_ExtPElS.cxx 2011-03-29 11:35:08.000000000 > -0500 > -+++ > /mnt/disk2b/jhu/tempdir/OpenCASCADE6.3.0/ros/src/Extrema/Extrema_ExtPElS.cxx > 2002-04-23 11:10:21.000000000 -0500 > -@@ -56,7 +56,6 @@ > +--- BRepClass_FaceClassifier.cxx_old 2011-04-28 10:16:13.000000000 > -0500 > ++++ BRepClass_FaceClassifier.cxx 2011-04-28 10:16:51.000000000 -0500 > +@@ -55,6 +55,7 @@ > + Extrema_ExtPS myExtrem; > + //-- myExtrem.Initialize(HS, U1, U2, V1, V2, Tol, Tol); > + myExtrem.Initialize(Surf, U1, U2, V1, V2, Tol, Tol); > ++ myExtrem.Perform(P); > + //---------------------------------------------------------- > + //-- On cherche le point le plus proche , PUIS > + //-- On le classifie. > +--- Extrema_ExtPS.cxx_old 2011-04-28 10:13:52.000000000 -0500 > ++++ Extrema_ExtPS.cxx 2011-04-28 10:15:46.000000000 -0500 > +@@ -88,10 +88,18 @@ > + Standard_Real U, V; > + PS.Parameter(U, V); > + if (myS->IsUPeriodic()) { > +- U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); > ++ Standard_Real Uupper = myuinf+myS->UPeriod(); > ++ if(U>(myuinf-mytolu) && U < myuinf) U = myuinf; > ++ else if(U < (Uupper+mytolu) && U > Uupper) U = Uupper; > ++ else > ++ U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); > + } > + if (myS->IsVPeriodic()) { > +- V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); > ++ Standard_Real Vupper = myvinf+myS->VPeriod(); > ++ if(V>(myvinf-mytolv) && V < myvinf) V = myvinf; > ++ else if(V < (Vupper+mytolv) && V > Vupper) V = Vupper; > ++ else > ++ V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); > + } > + if ((myuinf-U) <= mytolu && (U-myusup) <= mytolu && > + (myvinf-V) <= mytolv && (V-myvsup) <= mytolv) { > +--- Extrema_ExtPElS.cxx_old 2011-04-28 11:48:39.000000000 -0500 > ++++ Extrema_ExtPElS.cxx 2011-04-28 10:13:38.000000000 -0500 > +@@ -56,6 +56,7 @@ > gp_Vec myZ = Pos.XDirection()^Pos.YDirection(); > Standard_Real U1 = gp_Vec(Pos.XDirection()).AngleWithRef(OPp,myZ); > //-PI<U1<PI > Standard_Real U2 = U1 + PI; > -- if(U1 > -Tol && U1 < 0.) {U1 = 0.;} > ++ if(U1 > -Tol && U1 < 0.) {U1 = 0.;} > if (U1 < 0.) { U1 += 2. * PI; } > -

1 0

r4782 - cgm/trunk/geom/OCC
by jiangtao_ma＠yahoo.com 28 Apr '11

28 Apr '11

Author: janehu Date: 2011-04-28 11:53:43 -0500 (Thu, 28 Apr 2011) New Revision: 4782 Modified: cgm/trunk/geom/OCC/occ_patches Log: Correct previous patches for OCC6.3 build, which caused testcase check failure on gnep. Modified: cgm/trunk/geom/OCC/occ_patches =================================================================== --- cgm/trunk/geom/OCC/occ_patches 2011-04-28 00:36:18 UTC (rev 4781) +++ cgm/trunk/geom/OCC/occ_patches 2011-04-28 16:53:43 UTC (rev 4782) @@ -1,118 +1,78 @@ ---- ros/src/Extrema/Extrema_ExtPElS.cxx 2011-03-29 11:35:08.000000000 -0500 -+++ /mnt/disk2b/jhu/tempdir/OpenCASCADE6.3.0/ros/src/Extrema/Extrema_ExtPElS.cxx 2002-04-23 11:10:21.000000000 -0500 -@@ -56,7 +56,6 @@ +--- BRepClass_FaceClassifier.cxx_old 2011-04-28 10:16:13.000000000 -0500 ++++ BRepClass_FaceClassifier.cxx 2011-04-28 10:16:51.000000000 -0500 +@@ -55,6 +55,7 @@ + Extrema_ExtPS myExtrem; + //-- myExtrem.Initialize(HS, U1, U2, V1, V2, Tol, Tol); + myExtrem.Initialize(Surf, U1, U2, V1, V2, Tol, Tol); ++ myExtrem.Perform(P); + //---------------------------------------------------------- + //-- On cherche le point le plus proche , PUIS + //-- On le classifie. +--- Extrema_ExtPS.cxx_old 2011-04-28 10:13:52.000000000 -0500 ++++ Extrema_ExtPS.cxx 2011-04-28 10:15:46.000000000 -0500 +@@ -88,10 +88,18 @@ + Standard_Real U, V; + PS.Parameter(U, V); + if (myS->IsUPeriodic()) { +- U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); ++ Standard_Real Uupper = myuinf+myS->UPeriod(); ++ if(U>(myuinf-mytolu) && U < myuinf) U = myuinf; ++ else if(U < (Uupper+mytolu) && U > Uupper) U = Uupper; ++ else ++ U = ElCLib::InPeriod(U, myuinf, myuinf+myS->UPeriod()); + } + if (myS->IsVPeriodic()) { +- V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); ++ Standard_Real Vupper = myvinf+myS->VPeriod(); ++ if(V>(myvinf-mytolv) && V < myvinf) V = myvinf; ++ else if(V < (Vupper+mytolv) && V > Vupper) V = Vupper; ++ else ++ V = ElCLib::InPeriod(V, myvinf, myvinf+myS->VPeriod()); + } + if ((myuinf-U) <= mytolu && (U-myusup) <= mytolu && + (myvinf-V) <= mytolv && (V-myvsup) <= mytolv) { +--- Extrema_ExtPElS.cxx_old 2011-04-28 11:48:39.000000000 -0500 ++++ Extrema_ExtPElS.cxx 2011-04-28 10:13:38.000000000 -0500 +@@ -56,6 +56,7 @@ gp_Vec myZ = Pos.XDirection()^Pos.YDirection(); Standard_Real U1 = gp_Vec(Pos.XDirection()).AngleWithRef(OPp,myZ); //-PI<U1<PI Standard_Real U2 = U1 + PI; -- if(U1 > -Tol && U1 < 0.) {U1 = 0.;} ++ if(U1 > -Tol && U1 < 0.) {U1 = 0.;} if (U1 < 0.) { U1 += 2. * PI; } -

1 0

buildbot failure in cgm-occ: failed test
by cgma-dev＠mcs.anl.gov 28 Apr '11

28 Apr '11

1 0

Re: [cgma-dev] buildbot failure in cgm-shared: failed test
by James Porter 27 Apr '11

27 Apr '11

On Wed, 2011-04-27 at 12:39 -0500, Jason Kraftcheck wrote: > I cannot reproduce the problem below locally. I've tried CGM builds with > and without CUBIT, static and shared for each. My first guess is that > perhaps 'make clean' needs to be run in gnep. If that doesn't fix the > problem, then does the output of these commands differ on gnep? The builds usually run "make clean" when they start, but this time it required a "make distclean". Everything looks good now. - Jim

1 0

Re: [cgma-dev] buildbot failure in cgm-occ: failed test
by Jane Hu 27 Apr '11

27 Apr '11

I am now trying to obtain an access to gnep to reproduce the problems. I am not clear what's the problem for modify test. For test_occ, it's a bug fix test which is in occ_patches for OCC6.3 and OCC6.5. One reason could be the build is not using the patch. Jane On Wed, Apr 27, 2011 at 12:53 AM, <cgma-dev(a)mcs.anl.gov> wrote: > Fathom <http://gnep.mcs.anl.gov:8010/>: cgm-occ<http://gnep.mcs.anl.gov:8010/builders/cgm-occ>build > #460 <http://gnep.mcs.anl.gov:8010/builders/cgm-occ/builds/460> *Results:*failed > test *Buildslave:*gnep *Revision:*None *Reason:*The Nightly scheduler > named 'nightly' triggered this build Log Excerpt > > makept.cpp:521: warning: unused variable ‘num_loops’ > makept.cpp:555: warning: unused variable ‘gme’ > makept.cpp:627: warning: unused variable ‘new_edge’ > mv -f .deps/makept.Tpo .deps/makept.Po > /bin/sh ../libtool --tag=CXX --mode=link g++ -Wall -pipe -pedantic -O2 -DNDEBUG -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -o makept makept.o ../libcgm.la -lm > libtool: link: g++ -Wall -pipe -pedantic -O2 -DNDEBUG -o makept makept.o -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib ../.libs/libcgm.a /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP209.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPAttr.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKIGES.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKXSBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBinL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKLCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV3d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCDF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV2d.so /homes > /sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKService.so -lXt -lX11 -lXmu /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKHLR.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKOffset.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKShHealing.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFillet.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFeat.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBool.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBO.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKPrim.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMesh.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKTopAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBRep.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKG3d.so > /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKG2d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMath.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKernel.so -lstdc++ -lpthread -ldl -lm -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib > g++ -DHAVE_CONFIG_H -I. -I.. -I../geom/parallel -I../geom -I../itaps -DLITTLE_ENDIAN=BYTE_ORDER -DTEMPLATE_DEFS_INCLUDED -DHAVE_OCC -DHAVE_OCC_IGES -DHAVE_OCC_STEP -DHAVE_OCC_STL -DSRCDIR=. -I../geom -I../util -I../init -I../geom/ACIS -I../geom/virtual -I../geom/facet -I../geom/Cholla -I../geom/OCC -I. -I/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/inc -D_OCC64 -DHAVE_IOSTREAM -DHAVE_IOMANIP -DHAVE_FSTREAM -DHAVE_LIMITS_H -Wall -pipe -pedantic -O2 -DNDEBUG -MT r_w.o -MD -MP -MF .deps/r_w.Tpo -c -o r_w.o r_w.cpp > mv -f .deps/r_w.Tpo .deps/r_w.Po > /bin/sh ../libtool --tag=CXX --mode=link g++ -Wall -pipe -pedantic -O2 -DNDEBUG -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -o r_w r_w.o ../libcgm.la -lm > libtool: link: g++ -Wall -pipe -pedantic -O2 -DNDEBUG -o r_w r_w.o -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib ../.libs/libcgm.a /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP209.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPAttr.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKIGES.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKXSBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBinL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKLCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV3d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCDF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV2d.so /homes/sharp > /3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKService.so -lXt -lX11 -lXmu /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKHLR.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKOffset.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKShHealing.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFillet.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFeat.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBool.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBO.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKPrim.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMesh.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKTopAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBRep.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKG3d.so /home > s/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKG2d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMath.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKernel.so -lstdc++ -lpthread -ldl -lm -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib > g++ -DHAVE_CONFIG_H -I. -I.. -I../geom/parallel -I../geom -I../itaps -DLITTLE_ENDIAN=BYTE_ORDER -DTEMPLATE_DEFS_INCLUDED -DHAVE_OCC -DHAVE_OCC_IGES -DHAVE_OCC_STEP -DHAVE_OCC_STL -DSRCDIR=. -I../geom -I../util -I../init -I../geom/ACIS -I../geom/virtual -I../geom/facet -I../geom/Cholla -I../geom/OCC -I. -I/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/inc -D_OCC64 -DHAVE_IOSTREAM -DHAVE_IOMANIP -DHAVE_FSTREAM -DHAVE_LIMITS_H -Wall -pipe -pedantic -O2 -DNDEBUG -MT test_occ.o -MD -MP -MF .deps/test_occ.Tpo -c -o test_occ.o test_occ.cpp > mv -f .deps/test_occ.Tpo .deps/test_occ.Po > /bin/sh ../libtool --tag=CXX --mode=link g++ -Wall -pipe -pedantic -O2 -DNDEBUG -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -o test_occ test_occ.o ../libcgm.la -lm > libtool: link: g++ -Wall -pipe -pedantic -O2 -DNDEBUG -o test_occ test_occ.o -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib ../.libs/libcgm.a /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP209.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPAttr.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKIGES.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKXSBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBinL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKLCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV3d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCDF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV2d.so /h > omes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKService.so -lXt -lX11 -lXmu /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKHLR.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKOffset.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKShHealing.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFillet.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFeat.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBool.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBO.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKPrim.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMesh.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKTopAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBRep.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKG3 > d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKG2d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMath.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKernel.so -lstdc++ -lpthread -ldl -lm -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib > g++ -DHAVE_CONFIG_H -I. -I.. -I../geom/parallel -I../geom -I../itaps -DLITTLE_ENDIAN=BYTE_ORDER -DTEMPLATE_DEFS_INCLUDED -DHAVE_OCC -DHAVE_OCC_IGES -DHAVE_OCC_STEP -DHAVE_OCC_STL -DSRCDIR=. -I../geom -I../util -I../init -I../geom/ACIS -I../geom/virtual -I../geom/facet -I../geom/Cholla -I../geom/OCC -I. -I/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/inc -D_OCC64 -DHAVE_IOSTREAM -DHAVE_IOMANIP -DHAVE_FSTREAM -DHAVE_LIMITS_H -Wall -pipe -pedantic -O2 -DNDEBUG -MT operation.o -MD -MP -MF .deps/operation.Tpo -c -o operation.o operation.cpp > mv -f .deps/operation.Tpo .deps/operation.Po > /bin/sh ../libtool --tag=CXX --mode=link g++ -Wall -pipe -pedantic -O2 -DNDEBUG -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -o operation operation.o ../libcgm.la -lm > libtool: link: g++ -Wall -pipe -pedantic -O2 -DNDEBUG -o operation operation.o -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib ../.libs/libcgm.a /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP209.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPAttr.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKIGES.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKXSBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBinL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKLCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV3d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCDF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV2d.so > /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKService.so -lXt -lX11 -lXmu /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKHLR.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKOffset.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKShHealing.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFillet.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFeat.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBool.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBO.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKPrim.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMesh.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKTopAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBRep.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTK > G3d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKG2d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMath.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKernel.so -lstdc++ -lpthread -ldl -lm -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib > g++ -DHAVE_CONFIG_H -I. -I.. -I../geom/parallel -I../geom -I../itaps -DLITTLE_ENDIAN=BYTE_ORDER -DTEMPLATE_DEFS_INCLUDED -DHAVE_OCC -DHAVE_OCC_IGES -DHAVE_OCC_STEP -DHAVE_OCC_STL -DSRCDIR=. -I../geom -I../util -I../init -I../geom/ACIS -I../geom/virtual -I../geom/facet -I../geom/Cholla -I../geom/OCC -I. -I/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/inc -D_OCC64 -DHAVE_IOSTREAM -DHAVE_IOMANIP -DHAVE_FSTREAM -DHAVE_LIMITS_H '-DTEST_ENGINE="OCC"' -Wall -pipe -pedantic -O2 -DNDEBUG -MT brick_occ-brick.o -MD -MP -MF .deps/brick_occ-brick.Tpo -c -o brick_occ-brick.o `test -f 'brick.cpp' || echo './'`brick.cpp > /usr/include/c++/4.4/bits/stl_algo.h: In function ‘int main(int, char**)’: > /usr/include/c++/4.4/bits/stl_algo.h:194: warning: array subscript is above array bounds > /usr/include/c++/4.4/bits/stl_algo.h:194: warning: array subscript is above array bounds > mv -f .deps/brick_occ-brick.Tpo .deps/brick_occ-brick.Po > /bin/sh ../libtool --tag=CXX --mode=link g++ -Wall -pipe -pedantic -O2 -DNDEBUG -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -o brick_occ brick_occ-brick.o ../libcgm.la -lm > libtool: link: g++ -Wall -pipe -pedantic -O2 -DNDEBUG -o brick_occ brick_occ-brick.o -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib ../.libs/libcgm.a /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP209.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPAttr.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKIGES.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKXSBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBinL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKLCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV3d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCDF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV > 2d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKService.so -lXt -lX11 -lXmu /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKHLR.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKOffset.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKShHealing.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFillet.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFeat.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBool.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBO.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKPrim.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMesh.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKTopAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBRep.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib > /libTKG3d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKG2d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMath.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKernel.so -lstdc++ -lpthread -ldl -lm -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib > g++ -DHAVE_CONFIG_H -I. -I.. -I../geom/parallel -I../geom -I../itaps -DLITTLE_ENDIAN=BYTE_ORDER -DTEMPLATE_DEFS_INCLUDED -DHAVE_OCC -DHAVE_OCC_IGES -DHAVE_OCC_STEP -DHAVE_OCC_STL -DSRCDIR=. -I../geom -I../util -I../init -I../geom/ACIS -I../geom/virtual -I../geom/facet -I../geom/Cholla -I../geom/OCC -I. -I/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/inc -D_OCC64 -DHAVE_IOSTREAM -DHAVE_IOMANIP -DHAVE_FSTREAM -DHAVE_LIMITS_H -DTEST_OCC -Wall -pipe -pedantic -O2 -DNDEBUG -MT merge_occ-merge_test.o -MD -MP -MF .deps/merge_occ-merge_test.Tpo -c -o merge_occ-merge_test.o `test -f 'merge_test.cpp' || echo './'`merge_test.cpp > mv -f .deps/merge_occ-merge_test.Tpo .deps/merge_occ-merge_test.Po > /bin/sh ../libtool --tag=CXX --mode=link g++ -Wall -pipe -pedantic -O2 -DNDEBUG -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -o merge_occ merge_occ-merge_test.o ../libcgm.la -lm > libtool: link: g++ -Wall -pipe -pedantic -O2 -DNDEBUG -o merge_occ merge_occ-merge_test.o -L/home/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib ../.libs/libcgm.a /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEP209.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPAttr.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKSTEPBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKIGES.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKXSBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBinL.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKLCAF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKV3d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKCDF.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/l > ibTKV2d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKService.so -lXt -lX11 -lXmu /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKHLR.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKOffset.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKShHealing.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFillet.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKFeat.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBool.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBO.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKPrim.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMesh.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKTopAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomAlgo.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKBRep.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKGeomBase.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gc > c/lib/libTKG3d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKG2d.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKMath.so /homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib/libTKernel.so -lstdc++ -lpthread -ldl -lm -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib -Wl,-rpath -Wl,/homes/sharp/3rdparty/OCC/OpenCASCADE6.3.0/gcc/lib > ...make check-TESTS > make[3]: Entering directory `/disks/itaps-buildslave/cgm-occ/build/test' > make[4]: Entering directory `/disks/itaps-buildslave/cgm-occ/build/test' > [0;32mPASS [m: init > [0;32mPASS [m: sheet > [0;32mPASS [m: brick_facet > [0;32mPASS [m: merge_facet > /bin/sh: line 1: 12696 Aborted "$tst" > modify.log-t 2>&1 > [0;31mFAIL [m: modify > [0;32mPASS [m: subtract > [0;32mPASS [m: makept > [0;32mPASS [m: r_w > [0;31mFAIL [m: test_occ > [0;32mPASS [m: operation > [0;32mPASS [m: brick_occ > [0;32mPASS [m: merge_occ > [0;31m======================= > 2 of 12 tests failed > See test/test-suite.log > ======================= > [mmake[4]: *** [test-suite.log] Error 1 > >

1 0

Re: [cgma-dev] buildbot failure in cgm-shared: failed test
by Jason Kraftcheck 27 Apr '11

27 Apr '11

I cannot reproduce the problem below locally. I've tried CGM builds with and without CUBIT, static and shared for each. My first guess is that perhaps 'make clean' needs to be run in gnep. If that doesn't fix the problem, then does the output of these commands differ on gnep? $ ldd itaps/.libs/libiGeom.so | grep cgm libcgm.so.0 => /home/jason/cgm/bld-cubit12/.libs/libcgm.so.0 (0x00007fe460d66000) $ nm -C .libs/libcgm.so | grep CubitCompat 00000000000022be t global constructors keyed to CubitCompat.cpp 00000000000022d3 W CubitCompat_file_type(char const*) 0000000000002205 T CubitCompat_export_solid_model(DLIList<RefEntity*>&, char const*, char const*, int&, CubitString const&, char const*) 0000000000002064 T CubitCompat_import_solid_model(char const*, char const*, char const*, bool, bool, bool, bool, bool, bool, DLIList<RefEntity*>*) - jason On 04/27/2011 12:01 AM, cgma-dev(a)mcs.anl.gov wrote: > > Fathom <http://gnep.mcs.anl.gov:8010/>: cgm-shared > <http://gnep.mcs.anl.gov:8010/builders/cgm-shared> build #449 > <http://gnep.mcs.anl.gov:8010/builders/cgm-shared/builds/449> > > *Results:* failed test > *Buildslave:* gnep > *Revision:* None > *Reason:* The Nightly scheduler named 'cgm-shared-nightly' triggered > this build > > > Log Excerpt > > make[1]: Entering directory `/disks/itaps-buildslave/cgm-shared/build' > Making check in compat > make[2]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/compat' > make[2]: Nothing to be done for `check'. > ...Making check in util > make[2]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/util' > make[2]: Nothing to be done for `check'. > ...Making check in geom > make[2]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/geom' > Making check in . > make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/geom' > ...Making check in Cholla > make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/geom/Cholla' > make[3]: Nothing to be done for `check'. > ...Making check in facetbool > make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/geom/facetbool' > make[3]: Nothing to be done for `check'. > ...Making check in facet > make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/geom/facet' > make[3]: Nothing to be done for `check'. > ...Making check in virtual > make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/geom/virtual' > make[3]: Nothing to be done for `check'. > ...Making check in init > make[2]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/init' > make[2]: Nothing to be done for `check'. > ...Making check in . > make[2]: Entering directory `/disks/itaps-buildslave/cgm-shared/build' > make[2]: Nothing to be done for `check-am'. > ...Making check in itaps > make[2]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/itaps' > make check-recursive > make[3]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/itaps' > Making check in . > make[4]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/itaps' > make chaman testgeom > make[5]: Entering directory `/disks/itaps-buildslave/cgm-shared/build/itaps' > g++ -DHAVE_CONFIG_H -I. -I.. -I../geom/parallel -I../geom -DLITTLE_ENDIAN=BYTE_ORDER -DTEMPLATE_DEFS_INCLUDED -DHAVE_ACIS -DSRCDIR=. -I../util -I../geom -I../init -Wall -pipe -pedantic -O2 -DNDEBUG -MT chaman.o -MD -MP -MF .deps/chaman.Tpo -c -o chaman.o chaman.cc > mv -f .deps/chaman.Tpo .deps/chaman.Po > /bin/sh ../libtool --tag=CXX --mode=link g++ -Wall -pipe -pedantic -O2 -DNDEBUG -R/home/fathom/3rdparty/cubit/Cubit64/Cubit-12.2/bin -L/home/fathom/3rdparty/cubit/Cubit64/Cubit-12.2/bin -o chaman chaman.o libiGeom.la -lm > libtool: link: g++ -Wall -pipe -pedantic -O2 -DNDEBUG -o .libs/chaman chaman.o -L/home/fathom/3rdparty/cubit/Cubit64/Cubit-12.2/bin ./.libs/libiGeom.so -lm -Wl,-rpath -Wl,/disks/itaps-buildslave/packages/cgm-shared/lib -Wl,-rpath -Wl,/home/fathom/3rdparty/cubit/Cubit64/Cubit-12.2/bin > ./.libs/libiGeom.so: undefined reference to `CubitCompat_import_solid_model(char const*, char const*, char const*, bool, bool, bool, bool, bool, bool, DLIList*)' > ./.libs/libiGeom.so: undefined reference to `CubitCompat_export_solid_model(DLIList&, char const*, char const*, int&, CubitString const&, char const*)' > collect2: ld returned 1 exit status > -- "A foolish consistency is the hobgoblin of little minds" - Ralph Waldo Emerson

1 0