April 2011 - cgma-dev - mailman3.cels.anl.gov

buildbot failure in cgm-occ: failed test
by cgma-dev＠mcs.anl.gov 14 Apr '11

14 Apr '11

1 0

Re: [cgma-dev] testgeom failure with Cubit-12.2
by Jason Kraftcheck 13 Apr '11

13 Apr '11

On 04/13/2011 02:11 PM, Tim Tautges wrote: > The failure of getting intervals is due to attribute changes, so for > that one the test needs to be changed. Tthe way we pick up things from existing attributes needs to be changed. Cubit/CGM12.2 cleans up the CubitSimpleAttribs after processing the input file so we can no longer get size, scheme, etc. by searching for a CubitSimpleAttrib. We need to implement actual CubitAttrib subclasses for that kind of thing, > For the other one, I'm not sure > what the problem is. Jane/Jason, have you seen this failure? > I haven't seen this one before. - jason

1 0

Re: [cgma-dev] testgeom failure with Cubit-12.2
by Rajeev Jain 13 Apr '11

13 Apr '11

Adding some more info: this is on a 32bit OS and Cubit-12.2 used is for a 32bit system. The two failures are: 1. > Error code: 23 > Error desc: Problem adding entity to another set. > At : testgeom.cc:825 > Failure 2. > Error code: 15 > Error desc: Tag does not exist > At : testgeom.cc:1309 > Failure Rajeev >________________________________ >From: Tim Tautges <tautges(a)mcs.anl.gov> >To: cgma-dev(a)mcs.anl.gov >Sent: Wednesday, April 13, 2011 2:11 PM >Subject: Re: [cgma-dev] testgeom failure with Cubit-12.2 > >The failure of getting intervals is due to attribute changes, so for that one the test needs to be changed. For the >other one, I'm not sure what the problem is. Jane/Jason, have you seen this failure? > >- tim > >On 04/13/2011 01:39 PM, Rajeev Jain wrote: >> Hi, >> >> make check fails at testgeom when I use CGM merge-12 branch and >> cubit-12.2, my config line is: ./configure --enable-shared >> --prefix=/home/rajeev/lib/cgm12 --with-cubit=/home/rajeev/Cubit-12.2 >> --enable-debug >> >> There are two failures (see below, test results from running testgeom): >> 1. Topology adjacency >> 2. Save EntSet >> >> Let me know if you need more info. >> ------------------------------------------------------------------------------------------------------- >> rajeev@jain:~/cgm12/itaps$ gdb .libs/testgeom >> GNU gdb (GDB) 7.1-ubuntu >> Copyright (C) 2010 Free Software Foundation, Inc. >> License GPLv3+: GNU GPL version 3 or later >> <http://gnu.org/licenses/gpl.html> >> This is free software: you are free to change and redistribute it. >> There is NO WARRANTY, to the extent permitted by law. Type "show copying" >> and "show warranty" for details. >> This GDB was configured as "i486-linux-gnu". >> For bug reporting instructions, please see: >> <http://www.gnu.org/software/gdb/bugs/>... >> Reading symbols from /home/rajeev/cgm12/itaps/.libs/testgeom...done. >> (gdb) r >> Starting program: /home/rajeev/cgm12/itaps/.libs/testgeom >> [Thread debugging using libthread_db enabled] >> Using default input file: ./testgeom.sat >> >> >> ITAPS GEOMETRY INTERFACE TEST PROGRAM: >> >> gLoad: Read 1 ACIS Entities from the input file >> >> >> Constructed 1 Volume: 1 >> Model contents: >> vertices: 36 >> edges: 60 >> faces: 33 >> regions: 1 >> Success >> tags: Tags defined on model: GLOBAL_ID, NAME >> Success >> gentity sets: ERROR: Problem to add entity set. >> Error code: 23 >> Error desc: Problem adding entity to another set. >> At : testgeom.cc:825 >> Failure >> topology adjacencies: Success >> construct: Created swept volume 3 >> Success >> primitives: Success >> transforms: Success >> booleans: Updated volume(s): 10 >> Destroyed volume(s): 11 >> Updated volume(s): 12 >> Updated volume(s): 12 >> Destroyed volume(s): 13 >> Success >> mesh size: Read 1 ACIS Entities from the input file >> >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> ERROR: Attribute type -1 not recognized. >> >> Constructed 1 Volume: 1 >> ERROR: Failed to get intervals for curves >> Error code: 15 >> Error desc: Tag does not exist >> At : testgeom.cc:1309 >> Failure >> save entset: >> Exported: 2 Volumes >> >> Read 2 ACIS Entities from the input file >> >> >> WARNING: Entity name 'Group 1' can't be used in commands. >> Additional name 'Group_1' assigned. >> Constructed 2 Volumes: 2, 3 >> Success >> shutdown: Success >> >> TSTT TEST SUMMARY: >> Number Tests: 11 >> Number Successful: 9 >> Number Not Implemented: 0 >> Number Failed: 2 >> >> >> >> Program exited with code 02. >> >> Rajeev > >-- >================================================================ >"You will keep in perfect peace him whose mind is > steadfast, because he trusts in you." Isaiah 26:3 > > Tim Tautges Argonne National Laboratory > (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) > phone: (608) 263-8485 1500 Engineering Dr. > fax: (608) 263-4499 Madison, WI 53706 > > > >

1 0

Re: [cgma-dev] testgeom failure with Cubit-12.2
by Tim Tautges 13 Apr '11

13 Apr '11

The failure of getting intervals is due to attribute changes, so for that one the test needs to be changed. For the other one, I'm not sure what the problem is. Jane/Jason, have you seen this failure? - tim On 04/13/2011 01:39 PM, Rajeev Jain wrote: > Hi, > > make check fails at testgeom when I use CGM merge-12 branch and > cubit-12.2, my config line is: ./configure --enable-shared > --prefix=/home/rajeev/lib/cgm12 --with-cubit=/home/rajeev/Cubit-12.2 > --enable-debug > > There are two failures (see below, test results from running testgeom): > 1. Topology adjacency > 2. Save EntSet > > Let me know if you need more info. > ------------------------------------------------------------------------------------------------------- > rajeev@jain:~/cgm12/itaps$ gdb .libs/testgeom > GNU gdb (GDB) 7.1-ubuntu > Copyright (C) 2010 Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later > <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show copying" > and "show warranty" for details. > This GDB was configured as "i486-linux-gnu". > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>... > Reading symbols from /home/rajeev/cgm12/itaps/.libs/testgeom...done. > (gdb) r > Starting program: /home/rajeev/cgm12/itaps/.libs/testgeom > [Thread debugging using libthread_db enabled] > Using default input file: ./testgeom.sat > > > ITAPS GEOMETRY INTERFACE TEST PROGRAM: > > gLoad: Read 1 ACIS Entities from the input file > > > Constructed 1 Volume: 1 > Model contents: > vertices: 36 > edges: 60 > faces: 33 > regions: 1 > Success > tags: Tags defined on model: GLOBAL_ID, NAME > Success > gentity sets: ERROR: Problem to add entity set. > Error code: 23 > Error desc: Problem adding entity to another set. > At : testgeom.cc:825 > Failure > topology adjacencies: Success > construct: Created swept volume 3 > Success > primitives: Success > transforms: Success > booleans: Updated volume(s): 10 > Destroyed volume(s): 11 > Updated volume(s): 12 > Updated volume(s): 12 > Destroyed volume(s): 13 > Success > mesh size: Read 1 ACIS Entities from the input file > > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > ERROR: Attribute type -1 not recognized. > > Constructed 1 Volume: 1 > ERROR: Failed to get intervals for curves > Error code: 15 > Error desc: Tag does not exist > At : testgeom.cc:1309 > Failure > save entset: > Exported: 2 Volumes > > Read 2 ACIS Entities from the input file > > > WARNING: Entity name 'Group 1' can't be used in commands. > Additional name 'Group_1' assigned. > Constructed 2 Volumes: 2, 3 > Success > shutdown: Success > > TSTT TEST SUMMARY: > Number Tests: 11 > Number Successful: 9 > Number Not Implemented: 0 > Number Failed: 2 > > > > Program exited with code 02. > > Rajeev -- ================================================================ "You will keep in perfect peace him whose mind is steadfast, because he trusts in you." Isaiah 26:3 Tim Tautges Argonne National Laboratory (tautges(a)mcs.anl.gov) (telecommuting from UW-Madison) phone: (608) 263-8485 1500 Engineering Dr. fax: (608) 263-4499 Madison, WI 53706

1 0

testgeom failure with Cubit-12.2
by Rajeev Jain 13 Apr '11

13 Apr '11

Hi, make check fails at testgeom when I use CGM merge-12 branch and cubit-12.2, my config line is: ./configure --enable-shared --prefix=/home/rajeev/lib/cgm12 --with-cubit=/home/rajeev/Cubit-12.2 --enable-debug There are two failures (see below, test results from running testgeom): 1. Topology adjacency 2. Save EntSet Let me know if you need more info. ------------------------------------------------------------------------------------------------------- rajeev@jain:~/cgm12/itaps$ gdb .libs/testgeom GNU gdb (GDB) 7.1-ubuntu Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /home/rajeev/cgm12/itaps/.libs/testgeom...done. (gdb) r Starting program: /home/rajeev/cgm12/itaps/.libs/testgeom [Thread debugging using libthread_db enabled] Using default input file: ./testgeom.sat ITAPS GEOMETRY INTERFACE TEST PROGRAM: gLoad: Read 1 ACIS Entities from the input file Constructed 1 Volume: 1 Model contents: vertices: 36 edges: 60 faces: 33 regions: 1 Success tags: Tags defined on model: GLOBAL_ID, NAME Success gentity sets: ERROR: Problem to add entity set. Error code: 23 Error desc: Problem adding entity to another set. At : testgeom.cc:825 Failure topology adjacencies: Success construct: Created swept volume 3 Success primitives: Success transforms: Success booleans: Updated volume(s): 10 Destroyed volume(s): 11 Updated volume(s): 12 Updated volume(s): 12 Destroyed volume(s): 13 Success mesh size: Read 1 ACIS Entities from the input file ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. ERROR: Attribute type -1 not recognized. Constructed 1 Volume: 1 ERROR: Failed to get intervals for curves Error code: 15 Error desc: Tag does not exist At : testgeom.cc:1309 Failure save entset: Exported: 2 Volumes Read 2 ACIS Entities from the input file WARNING: Entity name 'Group 1' can't be used in commands. Additional name 'Group_1' assigned. Constructed 2 Volumes: 2, 3 Success shutdown: Success TSTT TEST SUMMARY: Number Tests: 11 Number Successful: 9 Number Not Implemented: 0 Number Failed: 2 Program exited with code 02. Rajeev

1 0

r4737 - cgm/branches/merge-cubit12/geom/OCC
by jiangtao_ma＠yahoo.com 13 Apr '11

13 Apr '11

Author: janehu Date: 2011-04-13 13:03:01 -0500 (Wed, 13 Apr 2011) New Revision: 4737 Modified: cgm/branches/merge-cubit12/geom/OCC/OCCAttribSet.cpp cgm/branches/merge-cubit12/geom/OCC/OCCShapeAttributeSet.cpp Log: Changed to make code simpler. Thanks, Jason. Modified: cgm/branches/merge-cubit12/geom/OCC/OCCAttribSet.cpp =================================================================== --- cgm/branches/merge-cubit12/geom/OCC/OCCAttribSet.cpp 2011-04-13 17:28:17 UTC (rev 4736) +++ cgm/branches/merge-cubit12/geom/OCC/OCCAttribSet.cpp 2011-04-13 18:03:01 UTC (rev 4737) @@ -21,9 +21,11 @@ #endif #if OCC_VERSION_MINOR < 5 -#include "TDataStd_Shape.hxx" + #include "TDataStd_Shape.hxx" + typedef TDataStd_Shape TDataXtd_Shape; + typedef Handle_TDataStd_Shape Handle_TDataXtd_Shape; #else -#include "TDataXtd_Shape.hxx" + #include "TDataXtd_Shape.hxx" #endif #include "TCollection_ExtendedString.hxx" @@ -49,18 +51,9 @@ //find the same shape attribute first aLabel = it1.Value(); -#if (OCC_VERSION_MINOR == 3) - Handle_TDataStd_Shape attr_shape; -#else Handle_TDataXtd_Shape attr_shape; -#endif - TopoDS_Shape old_shape; -#if (OCC_VERSION_MINOR == 3) - if(aLabel.FindAttribute(TDataStd_Shape::GetID(), attr_shape)) -#else if(aLabel.FindAttribute(TDataXtd_Shape::GetID(), attr_shape)) -#endif old_shape = attr_shape->Get(aLabel); if(old_shape.IsPartner(shape)) { @@ -82,18 +75,10 @@ if(!found) { aLabel = OCCQueryEngine::instance()->mainLabel.NewChild(); -#if (OCC_VERSION_MINOR == 3) - Handle_TDataStd_Shape attr_shape = TDataStd_Shape::Set(aLabel, shape); -#else Handle_TDataXtd_Shape attr_shape = TDataXtd_Shape::Set(aLabel, shape); -#endif //myLabel.AddAttribute(attr_shape); //test if the attribute has been attached -#if (OCC_VERSION_MINOR == 3) - assert(aLabel.IsAttribute(TDataStd_Shape::GetID())); -#else

1 0

Re: [cgma-dev] Fwd: [PATCH] API and linking changes for OpenCascade-6.5.0
by Jiangtao Hu 13 Apr '11

13 Apr '11

Hi, Jed Words are that we are going to support both 6.3 and 6.5. So I've just checked in the code to make them compatible in CGM. OCC6.3 does have a TKCAF lib which when configured with it for OCC6.3, doesn't make conflicting to other includes. So configure can stay as you figured for 6.5. Jane --- On Wed, 4/13/11, Jed Brown <jed(a)59A2.org> wrote: From: Jed Brown <jed(a)59A2.org> Subject: Re: [cgma-dev] Fwd: [PATCH] API and linking changes for OpenCascade-6.5.0 To: "Jason Kraftcheck" <kraftche(a)cae.wisc.edu> Cc: cgma-dev(a)mcs.anl.gov, "Jiangtao Hu" <jiangtao_ma(a)yahoo.com> Date: Wednesday, April 13, 2011, 11:46 AM On Wed, Apr 13, 2011 at 17:42, Jason Kraftcheck <kraftche(a)cae.wisc.edu> wrote: Actually, we don't even need the configure logic. Just use #ifdefs based on the values defined on OCC's Standard_Version.hxx. Linking is different: diff --git a/configure.ac b/configure.ac index 8994977..1e8a6a4 100644--- a/configure.ac+++ b/configure.ac@@ -354,7 +354,7 @@ HAVE_OCC_DEF= if test "x$occ_DIR" != "xno"; then OCC_CORE_LIBS="-lTKMesh -lTKTopAlgo -lTKGeomAlgo -lTKBRep -lTKGeomBase -lTKG3d -lTKG2d -lTKMath -lTKernel" OCC_GEOM_LIBS="-lTKHLR -lTKOffset -lTKShHealing -lTKFillet -lTKFeat -lTKBool -lTKBO -lTKPrim" - OCC_LCAF_LIBS="-lTKBinL -lTKLCAF -lTKCDF"+ OCC_LCAF_LIBS="-lTKBinL -lTKLCAF -lTKCDF -lTKCAF" OCC_LIBS="$OCC_LCAF_LIBS $OCC_GEOM_LIBS $OCC_CORE_LIBS" CUBIT_OCC_LIB="-lcubit_OCC" OCC_STEP_LIBS="-lTKSTEP -lTKSTEP209 -lTKSTEPAttr -lTKSTEPBase -lTKXSBase"

1 0

r4736 - cgm/branches/merge-cubit12/geom/OCC
by jiangtao_ma＠yahoo.com 13 Apr '11

13 Apr '11

Author: janehu Date: 2011-04-13 12:28:17 -0500 (Wed, 13 Apr 2011) New Revision: 4736 Modified: cgm/branches/merge-cubit12/geom/OCC/OCCAttribSet.cpp cgm/branches/merge-cubit12/geom/OCC/OCCShapeAttributeSet.cpp Log: Added version check code to make CGM compatible to both OCC6.3 and OCC6.5 kernel. Modified: cgm/branches/merge-cubit12/geom/OCC/OCCAttribSet.cpp =================================================================== --- cgm/branches/merge-cubit12/geom/OCC/OCCAttribSet.cpp 2011-04-13 15:11:00 UTC (rev 4735) +++ cgm/branches/merge-cubit12/geom/OCC/OCCAttribSet.cpp 2011-04-13 17:28:17 UTC (rev 4736) @@ -15,7 +15,17 @@ #include "OCCQueryEngine.hpp" #include "CubitSimpleAttrib.hpp" #include "CubitFileIOWrapper.hpp" + +#ifndef OCC_VERSION_MINOR +#include "Standard_Version.hxx" +#endif + +#if OCC_VERSION_MINOR < 5 +#include "TDataStd_Shape.hxx" +#else #include "TDataXtd_Shape.hxx" +#endif + #include "TCollection_ExtendedString.hxx" #include "Handle_TDataStd_Name.hxx" #include "Handle_TDataStd_ExtStringArray.hxx" @@ -39,9 +49,18 @@ //find the same shape attribute first aLabel = it1.Value(); +#if (OCC_VERSION_MINOR == 3) + Handle_TDataStd_Shape attr_shape; +#else Handle_TDataXtd_Shape attr_shape; +#endif + TopoDS_Shape old_shape; +#if (OCC_VERSION_MINOR == 3) + if(aLabel.FindAttribute(TDataStd_Shape::GetID(), attr_shape)) +#else if(aLabel.FindAttribute(TDataXtd_Shape::GetID(), attr_shape)) +#endif old_shape = attr_shape->Get(aLabel); if(old_shape.IsPartner(shape)) { @@ -63,10 +82,18 @@ if(!found) { aLabel = OCCQueryEngine::instance()->mainLabel.NewChild(); +#if (OCC_VERSION_MINOR == 3) + Handle_TDataStd_Shape attr_shape = TDataStd_Shape::Set(aLabel, shape); +#else Handle_TDataXtd_Shape attr_shape = TDataXtd_Shape::Set(aLabel, shape); +#endif //myLabel.AddAttribute(attr_shape);

1 0

Re: [cgma-dev] Fwd: [PATCH] API and linking changes for OpenCascade-6.5.0
by Jed Brown 13 Apr '11

13 Apr '11

On Wed, Apr 13, 2011 at 17:42, Jason Kraftcheck <kraftche(a)cae.wisc.edu>wrote: > Actually, we don't even need the configure logic. Just use #ifdefs based > on > the values defined on OCC's Standard_Version.hxx. > Linking is different: diff --git a/configure.ac b/configure.ac index 8994977..1e8a6a4 100644 --- a/configure.ac +++ b/configure.ac @@ -354,7 +354,7 @@ HAVE_OCC_DEF= if test "x$occ_DIR" != "xno"; then OCC_CORE_LIBS="-lTKMesh -lTKTopAlgo -lTKGeomAlgo -lTKBRep -lTKGeomBase -lTKG3d -lTKG2d -lTKMath -lTKernel" OCC_GEOM_LIBS="-lTKHLR -lTKOffset -lTKShHealing -lTKFillet -lTKFeat -lTKBool -lTKBO -lTKPrim" - OCC_LCAF_LIBS="-lTKBinL -lTKLCAF -lTKCDF" + OCC_LCAF_LIBS="-lTKBinL -lTKLCAF -lTKCDF -lTKCAF" OCC_LIBS="$OCC_LCAF_LIBS $OCC_GEOM_LIBS $OCC_CORE_LIBS" CUBIT_OCC_LIB="-lcubit_OCC" OCC_STEP_LIBS="-lTKSTEP -lTKSTEP209 -lTKSTEPAttr -lTKSTEPBase -lTKXSBase"

1 0

Re: [cgma-dev] Fwd: [PATCH] API and linking changes for OpenCascade-6.5.0
by Jason Kraftcheck 13 Apr '11

13 Apr '11

On 04/13/2011 10:36 AM, Jason Kraftcheck wrote: > On 04/13/2011 10:33 AM, Jiangtao Hu wrote: >> >> Hi, Jed >> >> Thanks for working on OCC6.3 to OCC6.5 migration issue, your patches >> have been applied to build CGM on OCC6.5. As to your question, since >> Opencascade doesn't support compatibility of OCC6.3 and OCC6.5, CGM >> won't be able to support it either. Which means your patches are >> necessary for migrating CGM from OCC6.3 kernel to OCC6.5 kernel. >> > > This is not really true. We could support both 6.3 and 6.5 by writing some > configure logic to detect the version and then using #ifdef's in the code. > The question is whether or not we *want* to support both 6.3 and 6.5. One > reason we might want to is that Ubuntu includes binary packages for OCC 6.3. > Actually, we don't even need the configure logic. Just use #ifdefs based on the values defined on OCC's Standard_Version.hxx. - jason

1 0